Investigation of inter-area available transfer capability (ATC) with respect to network and load changes
Başlık çevirisi mevcut değil.
- Tez No: 400584
- Danışmanlar: PROF. DR. ROBERT FISCHL
- Tez Türü: Yüksek Lisans
- Konular: Elektrik ve Elektronik Mühendisliği, Electrical and Electronics Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 1997
- Dil: İngilizce
- Üniversite: Drexel University
- Enstitü: Yurtdışı Enstitü
- Ana Bilim Dalı: Elektrik Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 154
Özet
Özet yok.
Özet (Çeviri)
Under deregulation, there is a need to increase the utilization of transmission system and to relief its congestion. This results in a strong demand to evaluate the real power transfer capability of the transmission network. In this thesis, we use a region-wise security assessment method rather than the point-wise security assessment performed by the present one scenario at-a-time study approach to obtain all feasible and secure power transfer operating points, so called Available Transfer Capability (ATC). The reason for that is the large uncertainty one encounters in determining the real power flows in an open access operating scenario. We define ATC region as the intersection of the Load Flow Feasibility (LFF), voltage security, voltage drop limit and thermal security regions at two inter-area spaces (the MW net-import and transfer spaces) and give a clear picture of the interactions between the operating limits. We investigate a 2-dimensional ATC region which gives the inter-area transfer as a function net MW import into the importing area (Area B). Of interest is the sensitivity of boundaries of the ATC region with respect to network and load changes. A 3-area 31-bus system is used to perform the sensitivity studies and the results are presented graphically illustrating the changes in the base-case and next-contingency security region boundaries and the particular limiting constraints (i.e., bottlenecks) defining these boundaries.
Benzer Tezler
- Esnek üretim sistemleri için bir etkin üretim denetleme modeli
An Effective supervisory control model for flexible manufacturing systems
BAHAR KORKUSUZ
Doktora
Türkçe
1989
Endüstri ve Endüstri Mühendisliğiİstanbul Teknik ÜniversitesiPROF.DR. GÖNÜL YENERSOY
- Roller bearing fault detection using rotary encoder
Açısal enkoder kullanarak bilyalı rulmanlarda hata tespiti
SAMET YALDIZ
Yüksek Lisans
İngilizce
2024
Makine Mühendisliğiİstanbul Teknik ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. KENAN YÜCE ŞANLITÜRK
- Adana havzası sismik gürültü kaynaklarının konum ve zaman özelliklerinin belirlenmesi
Investigation of spatial and temporal properties of seismic noise in the Adana basin
NEVRA BULUT
Yüksek Lisans
Türkçe
2016
Jeofizik Mühendisliğiİstanbul Teknik ÜniversitesiJeofizik Mühendisliği Ana Bilim Dalı
PROF. DR. AYŞE KAŞLILAR ŞİŞMAN
- İnşaat firmalarında bilgi yönetimi
Başlık çevirisi yok
AHMET ALTUNBAŞ
Yüksek Lisans
Türkçe
1998
Mimarlıkİstanbul Teknik ÜniversitesiBina Yapım Yönetimi Bilim Dalı
PROF. DR. YILDIZ SEY
- Fuel oil ile çalışan endüstriyel tip skoç kazanların doğalgaza dönüştürülmesinin bilgisayar simulasyonu
Computer simulation of converting industrial scotch type boilers working with fuel oil into natural gas
ARİF LEVENT KUZAY