Geri Dön

The design and evaluation of a small size wind-solar hybrid power system

Başlık çevirisi mevcut değil.

  1. Tez No: 401187
  2. Yazar: BEKİR ZİHNİ YÜKSEK
  3. Danışmanlar: DR. MOHAMMED FAHMY, DR. SCOTT GREENHALGH
  4. Tez Türü: Doktora
  5. Konular: Elektrik ve Elektronik Mühendisliği, Electrical and Electronics Engineering
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2013
  8. Dil: İngilizce
  9. Üniversite: University of Northern Iowa
  10. Enstitü: Yurtdışı Enstitü
  11. Ana Bilim Dalı: Belirtilmemiş.
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 119

Özet

Özet yok.

Özet (Çeviri)

Renewable energy sources are considered as alternative energy sources in order to replace current energy production systems and meet energy demands in the future. Renewable hybrid energy systems consist of two or more energy sources. Wind and solar energy sources are environmentally friendly, domestic, and finite energy sources. Either wind or solar applications may not be individually feasible to meet energy demand at some areas. However, combining these two energy sources will allow the use of energy systems effectively. There are two main concerns while designing and analyzing wind-solar hybrid power systems: system power reliability under varying climate conditions and corresponding system cost. Developments of new technology application of hybrid power systems reduce cost and raise power capacities which make such systems very popular for some countries. This research investigates the design and economic aspects, and analyses of a small size grid connected wind-solar hybrid power system at the University of Northern Iowa. This research provides a simulation study for the power system under fault operations. ETAP and HOMER simulation software tools are used in order to perform simulation studies for this research. The outcome from several case studies will be presented using simulated grid connected wind-solar hybrid power system. Simulation case studies are: Case study I: Load flow analysis. Case Study II: DC load flow analysis due to adding the battery array to the system. Case Study III: Unbalanced load flow analysis due to a phase fault of three phases of the power system. Each case study concentrates on the system's behavior and reaction under different working condition

Benzer Tezler

  1. Kolza sap-samanı ısıl davranımının termogravimetrik yöntemle incelenmesi

    Başlık çevirisi yok

    BÜLENT D. ÇİFT

    Yüksek Lisans

    Türkçe

    Türkçe

    1998

    Kimya Mühendisliğiİstanbul Teknik Üniversitesi

    Kimya Mühendisliği Ana Bilim Dalı

    DOÇ. DR. FİLİZ KARAOSMANOĞLU

  2. Nokta soğurucu tipi dalga enerjisi dönüştürücüsü dizilerinin hidrodinamik analizi

    Hydrodynamic analysis of point absorber type wave energy converter arrays

    İLKAY ÖZER ERSELCAN

    Doktora

    Türkçe

    Türkçe

    2017

    Mühendislik Bilimleriİstanbul Teknik Üniversitesi

    Gemi ve Deniz Teknoloji Mühendisliği Ana Bilim Dalı

    PROF. DR. ABDİ KÜKNER

  3. Giydirme cephe çift cam ünitelerinde rasyonel boyut seçimi

    Selection of rational sizes for double glazing units in curtaion walls

    NECMETTİN MURAT AYGÜN

    Doktora

    Türkçe

    Türkçe

    1992

    Mimarlıkİstanbul Teknik Üniversitesi

    DOÇ. DR. OKTAY CANSUN

  4. Türkiye'deki rüzgar gücü potansiyeline göre türbin güçlerinin saptanması ve tasarımı

    Determining the turbine power and desing according to wind energy potential in Turkey

    BARIŞ SAMSUN

    Yüksek Lisans

    Türkçe

    Türkçe

    2004

    Makine Mühendisliğiİstanbul Teknik Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    PROF. DR. METE ŞEN