Geri Dön

Energy performance evaluation of AAC

Başlık çevirisi mevcut değil.

PDF İndir

  1. Tez No: 401215
  2. Yazar: HÜLYA AYBEK
  3. Danışmanlar: DR. JASON T. KIRBY
  4. Tez Türü: Doktora
  5. Konular: Mimarlık, Architecture
  6. Anahtar Kelimeler: Energy-efficiency, Energy Modeling, Energy Modeling Tools, AAC, Thermal Mass, LEED Optimize Energy Performance credit
  7. Yıl: 2013
  8. Dil: İngilizce
  9. Üniversite: University of Alabama at Birmingham
  10. Enstitü: Yurtdışı Enstitü
  11. Ana Bilim Dalı: Belirtilmemiş.
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 313

Özet

Özet yok.

Özet (Çeviri)

The U.S. building industry constitutes the largest consumer of energy (i.e., electricity, natural gas, petroleum) in the world. The building sector uses almost 41percent of the primary energy and approximately 72percent of the available electricity in the United States. As global energy-generating resources are being depleted at exponential rates, the amount of energy consumed and wasted cannot be ignored. Professionals concerned about the environment have placed a high priority on finding solutions that reduce energy consumption while maintaining occupant comfort. Sustainable design and the judicious combination of building materials comprise one solution to this problem. A future including sustainable energy may result from using energy simulation software to accurately estimate energy consumption and from applying building materials that achieve the potential results derived through simulation analysis. Energy-modeling tools assist professionals with making informed decisions about energy performance during the early planning phases of a design project, such as determining the most advantageous combination of building materials, choosing mechanical systems, and determining building orientation on the site. By implementing energy simulation software to estimate the effect of these factors on the energy consumption of a building, designers can make adjustments to their designs during the design phase when the effect on cost is minimal. The primary objective of this research consisted of identifying a method with which to properly select energy-efficient building materials and involved evaluating the potential of these materials to earn LEED credits when properly applied to a structure. In addition, this objective included establishing a framework that provides suggestions for improvements to currently available simulation software that enhance the viability of the estimates concerning energy efficiency and the achievements of LEED credits. The primary objective was accomplished by using conducting several simulation models to determine the relative energy efficiency of wood-framed, metal-framed, and Aerated Autoclaved Concrete (AAC) wall structures for both commercial and residential buildings.

Benzer Tezler

  1. Tez No

    881098

    Investigation of in-plane and out-of-plane seismic behavior of aac infill walls with innovative bed-joint reinforcement configurations

    Yenilikçi derz donatıları ile imal edilen gazbeton bölme duvarların düzlem içi ve düzlem dışı doğrultudaki deprem davranışının incelenmesi

    ÖMER FARUK HALICI

    Doktora

    İngilizce

    İngilizce

    2023

    Deprem Mühendisliğiİstanbul Teknik Üniversitesi

    İnşaat Mühendisliği Ana Bilim Dalı

    PROF. DR. ALPER İLKİ

  2. Tez No

    398080

    Functional properties and quality parameters of grape extract powder substituted bread and extruded products

    Fonksiyonel üzüm ekstraktı içeren ekmek ve ekstrüde ürünlerin fonksiyonel özelikleri ve kalite parametreleri

    ZEYNEP TACER CABA

    Doktora

    İngilizce

    İngilizce

    2015

    Gıda Mühendisliğiİstanbul Teknik Üniversitesi

    Gıda Mühendisliği Ana Bilim Dalı

    YRD. DOÇ. DR. DİLARA ERDİL

    PROF. DR. MUSTAFA HİKMET BOYACIOĞLU

  3. Tez No

    791923

    Kayseri mahallesinde yer alan özgün taş bina kabuğunun enerji korunumu açısından higrotermal analizi ve iyileştirme önerileri

    Hygrothermal analysis and improvement recommendations in terms of energy conservation of the original stone building envelope in Kayseri neighborhood

    TUĞBA YILDIZ

    Yüksek Lisans

    Türkçe

    Türkçe

    2023

    Mimarlıkİstanbul Teknik Üniversitesi

    Mimarlık Ana Bilim Dalı

    PROF. DR. LEYLA TANAÇAN

  4. Tez No

    301809

    Bir otomotiv klima sisteminin ekserji analizi ile performans tespiti

    Performance analysis of an automotive climate system using exergy analysis

    FATİH ATEŞER

    Yüksek Lisans

    Türkçe

    Türkçe

    2012

    EnerjiKarabük Üniversitesi

    Makine Eğitimi Ana Bilim Dalı

    YRD. DOÇ. DR. PERİHAN SEKMEN

  5. Tez No

    573787

    The energy performance evaluation of Etfe (Ethylene tetrafluoroethylene) cusion systems integrated on the south façade of a hypothetical test room and comparison of it with glass façade systems

    Hipotetik ve güneye bakan bir test odasının, Etfe (Ethylene tetrafluoroethylene) sistemleri ile cam dış cephe sistemlerinin karşılaştırılıp, enerji performanslarının değerlendirilmesi

    SELİM KARAMAN

    Yüksek Lisans

    İngilizce

    İngilizce

    2019

    EnerjiYaşar Üniversitesi

    Mimarlık Ana Bilim Dalı

    DOÇ. DR. BAŞAK KUNDAKCI KOYUNBABA

Geri Dön