Geri Dön

Atomistic simulations on the interface bonding between aluminum and silicon surfaces

Başlık çevirisi mevcut değil.

  1. Tez No: 402431
  2. Yazar: LEVENT İNCİ
  3. Danışmanlar: DR. A. ALPAS, DR. V. STOILOV
  4. Tez Türü: Yüksek Lisans
  5. Konular: Bilgisayar Mühendisliği Bilimleri-Bilgisayar ve Kontrol, Bilim ve Teknoloji, Computer Engineering and Computer Science and Control, Science and Technology
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2006
  8. Dil: İngilizce
  9. Üniversite: University of Windsor
  10. Enstitü: Yurtdışı Enstitü
  11. Ana Bilim Dalı: Belirtilmemiş.
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 121

Özet

Özet yok.

Özet (Çeviri)

Although the near-surface deformation behaviour of Al-Si alloys is generally thought to depend on the characteristics of the interface between Al (matrix) and Si (second phase), little is known about its specific deformation and debonding mechanisms. In this study, molecular-dynamics (MD) simulations with the modifîed embedded atom method (MEAM) potential were utilized to investigate the Al-Si interfaces during room-temperature plastic deformation. MD simulations were carried out on a three-dimensional Al-Si interface model using about lxl04 atoms. The evolution of the subsurface microstructure of Al-Si system was investigated to develop a constitutive stress-strain relationship. A characteristic stick-slip behaviour was observed. Without vacancies, dislocations, and mechanical defects, the interfacial failure occurred över a finite strain increment and the interface failed at 8GPa stress with the strain of 14%. The results demonstrated that MEAM predictions were consistent with the finite element method predictions, at normalized small stress values the correlation is acceptable (%20).

Benzer Tezler

  1. Hedefli kanser tedavisine yönelik kil katkılı nanopartikül üretimi ve modellenmesi

    Production and modeling of clay additive nanoparticle for targeted cancer treatment

    DENİZ KARATAŞ

    Doktora

    Türkçe

    Türkçe

    2017

    Biyokimyaİstanbul Teknik Üniversitesi

    Cevher Hazırlama Mühendisliği Ana Bilim Dalı

    PROF. DR. MEHMET SABRİ ÇELİK

    DOÇ. DR. ADEM TEKİN

  2. Environment induced conformational transition in peptides

    Peptitlerde çevresel etkilerle yapısal geçişler

    CAHİT DALGIÇDİR

    Doktora

    İngilizce

    İngilizce

    2014

    BiyofizikKoç Üniversitesi

    Hesaplamalı Bilimler ve Mühendislik Ana Bilim Dalı

    YRD. DOÇ. DR. MEHMET SAYAR

  3. Nanomekanikte yerel olmayan elastisite teorisi ve çok-ölçekli modellemeye uygulanması

    Nonlocal theory of elasticity in nanomechanics and application to multiscale models

    MERAL TUNA EROĞLU

    Doktora

    Türkçe

    Türkçe

    2019

    Makine Mühendisliğiİstanbul Teknik Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    DOÇ. DR. MESUT KIRCA

  4. Scale dependence in mechanical behavior of silicon nanowires

    Silikon nanotellerde mekanik davranışın ölçek bağımlılığı

    SINA ZARE PAKZAD

    Doktora

    İngilizce

    İngilizce

    2024

    Makine MühendisliğiKoç Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    PROF. DR. BURHANETTİN ERDEM ALACA

  5. Computational design and analysis of nanostructured materials for neuromorphic engineering

    Neuromorfik mühendislik için nano yapılı malzemelerin hesaplamalı tasarımı ve analizi

    AYKUT TURFANDA

    Doktora

    İngilizce

    İngilizce

    2024

    Mühendislik Bilimleriİstanbul Teknik Üniversitesi

    Nanobilim ve Nanomühendislik Ana Bilim Dalı

    PROF. DR. HİLMİ ÜNLÜ