Thermoelectric power generator for automotive applications
Başlık çevirisi mevcut değil.
- Tez No: 403351
- Danışmanlar: Prof. YUYING YAN
- Tez Türü: Doktora
- Konular: Mekatronik Mühendisliği, Enerji, Mechatronics Engineering, Energy
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2016
- Dil: İngilizce
- Üniversite: The Unıversıty Of Nottıngham
- Enstitü: Yurtdışı Enstitü
- Ana Bilim Dalı: Belirtilmemiş.
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
Özet yok.
Özet (Çeviri)
A thermoelectric generator (TEG) converts thermal energy into electrical energy corresponding to temperature gradient across both hot and cold surfaces with a conversion efficiency of approximately 5%. In spite of the conversion efficiency, TEGs can be implemented effectively for waste heat recovery systems within the power rating of kilowatts. The insufficiency of natural resources, frequently increasing oil costs and emission regulations have become an incentive factor of the recent increased interest in TEG applications. This thesis introduces a practical implementation of the thermoelectric generator for an automotive exhaust system which has a rapid transient response to produce electrical energy from the waste heat which flows through the exhaust pipe. In addition to automotive TE power generator implementation, an H-Bridge DC-DC converter within the operation of maximum power point tracking method is introduced in this thesis to obtain the maximum power transfer between the thermoelectric power generator and the load. This thesis presents a transient solution to the two-dimensional heat transfer equation with variant ambient temperature that determines heat transfer and electrical potential across the thermoelectric pellet. This equation is applied into a designed two-dimensional heat transfer MATLAB model and a comparison of simulation and experimental results approves the accuracy of the designed model. In addition to heat transfer simulation, a dynamic large scale thermoelectric power generator simulation program is introduced in this thesis to provide data analysis of actual implementation.
Benzer Tezler
- CaO-XO-CoO (X= Na, Ba, Sr, La) faz diyagramlarının tespiti ve termoelektrik özelliklerinin incelenmesi
Determination of phase diagrams and investigation of thermoelectrical properties in CaO-XO-CoO (X= Na, Ba, Sr, La) systems
ANIL DEMİRKESEN
Yüksek Lisans
Türkçe
2017
Metalurji Mühendisliğiİstanbul Teknik ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. NURİ SOLAK
- A pressure monitoring system with thermoelectric energy harvesting and wireless communication feature for air induction system of vehicles
Araç hava emiş sistemleri için termoelektrik enerji hasatlama ve kablosuz iletişim özelliklerine sahip basınç izleme sistemi
ENİS KADİR SAN
Yüksek Lisans
İngilizce
2016
Makine MühendisliğiHacettepe ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. BİLSAY SÜMER
- Bir termoelektrik modülün matematiksel modellenmesi
The mathematical modelling of a thermoelectric module
MEHMET HAN İZGİ
Yüksek Lisans
Türkçe
2018
Elektrik ve Elektronik Mühendisliğiİstanbul ÜniversitesiElektrik-Elektronik Mühendisliği Ana Bilim Dalı
DOÇ. DR. SEDAT BALLIKAYA
- Thermoelectric generator passive cooling system prototype design for use in photovoltaic panels
Fotovoltaik paneller için termoelektrik jeneratör pasif soğutma sistemi prototip tasarımı
EGE İLHAN
Yüksek Lisans
İngilizce
2023
EnerjiAntalya Bilim ÜniversitesiElektrik ve Bilgisayar Mühendisliği Ana Bilim Dalı
DOÇ. DR. MUSTAFA İLKER BEYAZ
- CeO2 katkılı Ca3Co4O9 termoelektrik malzemelerde faz dengeleri
Phase equilibria for CeO2 doped Ca3Co4O9 thermoelectric materials
BEYZA BAKKAL
Yüksek Lisans
Türkçe
2019
Metalurji Mühendisliğiİstanbul Teknik ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ NURİ SOLAK