Farklı elektrotların kapasitif iyonsuzlaştırma proses verimine etkilerinin araştırılması
Investigation of the effect of different electrodes on capasitive deionization process efficiency
- Tez No: 472564
- Danışmanlar: PROF. DR. AHMET KARAGÜNDÜZ
- Tez Türü: Yüksek Lisans
- Konular: Çevre Mühendisliği, Environmental Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2017
- Dil: Türkçe
- Üniversite: Gebze Teknik Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Çevre Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 79
Özet
Kapasitif iyonsuzlaştırma prosesi, enerji verimli bir iyon giderim prosesi olup son yıllarda özellikle tuz giderimi konusunda verimli, ekonomik ve yenilikçi bir proses olarak öne çıkmaktadır. Bu konuda yapılan çalışmalar temel olarak iyonların toplandığı elektrotların prosesin önemli bir parçası olduğunu ve bu konuda önemli gelişmelere ihtiyaç olduğunu göstermektedir. Kapasitif iyonsuzlaştırma temel olarak adsorpsiyon ve desorpsiyon süreçlerini içerir. Adsorpsiyon sürecinde, karşıt iyonlar elektrostatik güç altında voltaj uygulandığında elektrot üzerine depolanmakta ve çözelti içerisinde karşı tarafa taşınmakta böylece çözeltinin tuzu alınmaktadır. Desorpsiyon sürecinde ise voltaj ters çevrilerek adsorbe edilmiş iyonlar elektrottan geri püskürtülmekte ve su akışına dönmesi sağlanmaktadır. Bu işlem yapılarak elektrot üzerindeki iyonlar elektrotu yeniden oluşturmak için tamamen ayrıştırılmakta ve adsorpsiyon kapasitesi yenilenmektedir. Kapasitif iyonsuzlaştırma prosesinde yüksek verim elde etmek birçok çalışma şartına bağlıdır. Bunlardan biride çalışmada kullanılan elektrot çeşitidir. Bu tez kapsamında kapasitif iyonsuzlaştırma ve membran kapasitif iyonsuzlaştırma proseslerinde kullanılabilecek yüksek verimli elektrotların üretilmesi amaçlanmıştır. Üretilen elektrotların farklı iyonların gideriminde kullanılması planlanmıştır. Temel olarak üç farklı elektrot tipi incelenmiştir. Birisi grafit folyo üzerine yerleştirilen aktif karbon diğeri yine grafit folyoya sabitlenmiş grafit ve son olaraksa tez kapsamında üretilen grafen oksit. Çalışmalar dönüşümlü voltametri deneylerinden alınan sonuçlar ışığında hem kapasitif iyonsuzlaştırma hücresi hem de membran kapasitif iyonsuzlaştırma hücresi kullanılarak gerçekleştirilmiştir. Elde edilen sonuçlar pH, iletkenlik ve elektrosorpsiyon gibi parametreler incelenerek karşılaştırılmıştır.
Özet (Çeviri)
Capacitive deionization process (CDI), is an energy efficient ion removal process which is particularly efficient in the desalination in recent years, and is commonly used as an economical and innovative processes. Studies in this regard shows that basically the electrodes of the ion is collected an important part of process and needs for significant improvements in this respect. The CDI basically includes the adsorption process and the desorption process. In the adsorption process, the counter-ions in the solution migrate towards and are stored onto the electrodes under the electrostatic force when the cell voltage is applied, thus the solution is desalted. In the desorption process, the adsorbed ions are repelled from the electrodes and return into the flushing stream as the cell voltage is reversed. By doing so, the ions on the electrode can be desorbed completely in order to regenerate the electrode and restore its adsorption capacity. Achieving high efficiency in the capacitive de-ionization process depends on many operating conditions. Some of these are the types of electrodes used in working. In this thesis, it is aimed to produce highly efficient electrodes which can be used in capacitive de-ionization and membrane capacitive de-ionization processes. It is planned to use the produced electrodes in the removal of different ions. Basically three different types of electrodes have been studied. Graphite, one of which is placed on a graphite foil, graphite fixed to graphite foil, and finally graphite oxide produced under the thesis. The results from the studies of alternating voltammetry experiments were performed using both the capacitive de-ionization cell and the membrane capacitive de-ionization cell in the light. The results were compared by examining parameters such as pH, conductivity and electrospection.
Benzer Tezler
- İstiridye mantarı (pleurotus ostreatus) katkılı farklı kompozit elektrotların kapasitif özelliklerinin incelenmesi
Investigation of the capacitance properties of different composite electrodes doped with oyster mushroom (pleurotus ostreatus)
AYKUT ÖZATA
Yüksek Lisans
Türkçe
2023
KimyaIğdır ÜniversitesiBiyomühendislik ve Bilimleri Ana Bilim Dalı
DOÇ. DR. BAHRİ GÜR
- Süperkapasitör elektrot malzemesi olarak kullanılacak tiyofen türevlerinin kimyasal sentezi, elektropolimerizasyonu ve karakterizasyonu
Chemical synthesis, electropolymerization and characterization of thiophene derivatives as an electrode material for supercapacitors
ANDAÇ ARSLAN
- Karbazol-tertiyofen in elektropolimerizasyonu, karakterizasyonu, kapasitör ve sensör uygulamaları
Electropolymerization, characterization, capacitor and sensor applications of carbazole-terthiophene
NURİ EREN
Yüksek Lisans
Türkçe
2013
Polimer Bilim ve TeknolojisiNamık Kemal ÜniversitesiKimya Ana Bilim Dalı
DOÇ. DR. MURAT ATEŞ
- 2,2'-bitiyofen, n-metilpirol ve 3-(oktiltiyofen) monomerlerinin elektropolimerizasyonları, elektrokimyasal empedans spektroskopisi ve eşdeğer devre modelleri
Electropolymerizations of 2,2'-bithiophene, n-methylpyrrole and 3-(octylthiophene) monomers, electrochemical impedance spectroscopy and equivalent circuit models
FATİH ARICAN
Yüksek Lisans
Türkçe
2013
Polimer Bilim ve TeknolojisiNamık Kemal ÜniversitesiKimya Ana Bilim Dalı
DOÇ. DR. MURAT ATEŞ
- Tiyofen ile tiyofen türevlerinden (3-hekzil) tiyofen ve (3-oktil) tiyofen monomerlerinin elektrokimyasal polimerizasyonu, tio2 nanopartikülleri ile kompozitlerinin hazırlanması, karakterizasyonu ve korozyon önleme davranışlarının incelenmesi
Electrochemical polymerization of thiophene and thiophene derivatives (3-hexyl) thiophene and (3-octyl) thiophene, preparation of composites with tio2 nanoparticules, characterizations and corrosion protection behaviours
AYŞEGÜL DOLAPDERE