Isı yalıtım kabiliyetine sahip perlit esaslı geopolimer bağlayıcılı harçların geliştirilmesi
Development of perlite-based geopolymeric mortars with thermal insulation capability
- Tez No: 609939
- Danışmanlar: PROF. DR. İLHAMİ DEMİR
- Tez Türü: Doktora
- Konular: İnşaat Mühendisliği, Civil Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2020
- Dil: Türkçe
- Üniversite: Kırıkkale Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: İnşaat Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 150
Özet
İnşaat endüstrisi dünyada sürekli büyümeye devam eden en büyük endüstrilerden biridir. Bu sebeple inşaat endüstrisinin enerji tüketiminin büyük kısmından sorumlu olduğu söylenebilir. Söz konusu enerji tüketiminin büyük bir kısmı da çimento üretiminden kaynaklanmaktadır. Çimento üretimi esnasında CO2 salınımı ve yüksek enerji tüketiminin en aza indirilmesi amacı ile bu çalışmada perlit içeren geopolimer harçlar üretilmiştir. Çimento üretimi ile çevreye verilecek zararın en aza indirilmesi, perlitin ekonomiye kazandırılması ve çimento bağlayıcılı hafif malzemeler ile kıyaslandığında ise dayanımı yüksek, hafif, yalıtım özellikleri iyi ve kullanılabilir bir malzeme elde edilmesi amaçlanmıştır. Bu çalışmanın birinci aşamasında; perlitin geopolimer harçlarda kullanılabilirliğini belirleyebilmek için perlit madenlerinden elde edilen malzemenin dayanıma etkisi incelenmiştir. Aktivatör olarak da farklı oranlarda sodyum hidroksit kullanılmıştır. İkinci aşamada; geopolimer örneklerin ısı iletkenlik katsayılarını ve birim hacim ağırlıklarını düşürebilmek için genleştirilmiş perlit, standart kumun yerine ikame edilerek üretilen geopolimer örnekler üzerinde testler gerçekleştirilmiştir. Üçüncü aşamada ise; dayanımları belli seviyede tutulan geopolimer örneklerin birim hacim ağırlıkları, ısıl iletkenlikleri, cıvalı porozimetre deneyi ile boşluk miktarları ve mikro yapıları incelenerek elde edilen değerler karşılaştırmalı olarak verilmiştir. Sonuç olarak; öğütülmüş ham perlitin geopolimer harçlarda bağlayıcı olarak kullanılabileceği, genleştirilmiş perlitin de hafif kompozit malzeme üretmek için uygun bir malzeme olduğu belirlenmiştir. Ayrıca genleştirilmiş perlit kullanımı, basınç dayanımını düşürmekle birlikte birim hacim ağırlık değerini ve ısıl iletkenlik katsayısı değerini de düşürdüğü sonucuna varılmıştır. Üretilen geopolimer kompozit malzemenin optimum değerleri ise, basınç dayanımı 1,67 MPa, birim hacim ağırlığı 0,63 g/cm³ ve ısıl iletkenlik katsayısı ise 0,09 W/mK olarak elde edilmiştir.
Özet (Çeviri)
The construction industry is one of the largest industries in the world and continues to grow. Therefore, it can be said that the construction industry is responsible for most of the energy consumption. A large part of this energy consumption is due to cement production. In this study, geopolymer composites containing perlite were produced in order to minimize CO2 emission and high energy consumption during cement production. It is aimed to obtain a material with high strength, lightweight, good insulation properties and usable compared to lightweight cementitious composites, minimize the damage to the environment by cement production and bring perlite to the economy. In the first stage of this study; the effect of the mechanical strength of materials obtained from perlite mines was investigated to determine the usability of perlite in geopolymer composites. Different ratio of sodium hydroxide was used as activators as well. In the second stage; tests were performed on the samples produced by replacing expanded perlite with sand to improve the thermal conductivity and to reduce the specific bulk density of the samples. In the third stage; the specific bulk density, thermal conductivity, pore structure and microstructure of samples that have strength in the defined level were investigated and all results were compared. As a result; it was determined that ground raw perlite can be used as binder in geopolymer composites and that expanded perlite is a suitable material to produce lightweight composite material. In addition, it was concluded that the use of expanded perlite reduces the specific bulk density and thermal conductivity coefficient, decreasing the compressive strength as well. The optimum values of the produced geopolymer composite material were obtained as 1,67 MPa for compressive strength, 0,63 g / cm³ for bulk density and 0,09 W / mK for thermal conductivity coefficient.
Benzer Tezler
- Kitre bağlayıcılı termik santral uçucu küllerinin yeni bir yapı malzemesi olarak değerlendirilmesi
Evaluation of thermal power plant ash in tragacanth binder combinations as a new construction material
ŞERİF YILMAZ
Doktora
Türkçe
2010
Makine MühendisliğiFırat ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. YAŞAR BİÇER
- Güneş kollektörlerinde enerji verimliliğini artırmak için faz değiştiren malzemelerin kullanımının araştırılması
Investigation of using of phase change materials to increase energy efficency in solar collectors
MİKAİL KURTOĞLU
Yüksek Lisans
Türkçe
2023
EnerjiGümüşhane ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ MERYEM TERHAN
- Gaz türbinlerinde su/buhar enjeksiyonunun termoekonomik performans ve emisyonlar üzerindeki etkisinin incelenmesi ve optimizasyonu
Effects of water/steam injection on the thermoeconomic performance and emissions of gas turbines and their optimization
HASAN KAYHAN KAYADELEN
Doktora
Türkçe
2014
EnerjiYıldız Teknik ÜniversitesiGemi İnşaatı ve Gemi Makineleri Mühendisliği Ana Bilim Dalı
PROF. DR. YASİN ÜST
- Farklı çekirdek malzemesine sahip kompozit sandviç panellerin darbe ve darbe sonrası basma davranışlarının incelenmesi
Low velocity impact and after impact compression behavior of composite sandwich panels with different core materials
EMRE LEKESİZCAN
Yüksek Lisans
Türkçe
2022
Makine MühendisliğiErciyes ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ UMUT ÇALIŞKAN
- Negatif Poisson oranına sahip kafes yapılarda geometrik parametrelerin titreşim yalıtımına etkisinin numerik ve deneysel incelenmesi
Analysis of the effect of geomtrical parameters to vibration isolation in lattice structures with negative Poisson's ratio
ALİ MERİH KARADEMİR
Yüksek Lisans
Türkçe
2021
Makine MühendisliğiTOBB Ekonomi ve Teknoloji ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ RECEP MUHAMMET GÖRGÜLÜARSLAN