Effects of equal channel angular extrusion on themicrostructure and mechanical properties of CoCrFeMnNi
Başlık çevirisi mevcut değil.
- Tez No: 645650
- Danışmanlar: Belirtilmemiş.
- Tez Türü: Yüksek Lisans
- Konular: Metalurji Mühendisliği, Metallurgical Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2017
- Dil: İngilizce
- Üniversite: Texas A&M University
- Enstitü: Yurtdışı Enstitü
- Ana Bilim Dalı: Belirtilmemiş.
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 111
Özet
Özet yok.
Özet (Çeviri)
The present work aims at revealing the effect of grain size on the post processing mechanical behavior of the equiatomic CoCrFeMnNi high entropy alloy (HEA) upon severe plastic deformation (SPD). SPD has been applied using the equal channel angular extrusion (ECAE) process where the billets are extruded through a 90° corner die achieving near simple shear deformation. The microstructure and mechanical properties of successfully extruded billets were reported using Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), Energy Dispersive Spectroscopy (EDS), tension experiments and microhardness measurements. The effects of extrusion conditions, such as temperature, processing route and extrusion rate on the microstructure and mechanical properties, are investigated for the extrusion and flow plane of each billet. The ECAE deformation of CoCrFeMnNi at high homologous temperatures results in deformation twinning. Refined mean grain size leads to significant increase in tensile flow stresses at room temperature. Further work is needed to find processing schedules at low temperatures to refine the grain size further to determine the lower limit of grain size one can achieve in bulk HEAs.
Benzer Tezler
- Investigation of the effects of equal channel angular extrusion on light weight alloys
Eş kanallı açısal ekstrüzyon yönteminin hafif alaşımlar uzerindeki etkilerinin incelenmesi
PINAR KARPUZ
Doktora
İngilizce
2012
Metalurji MühendisliğiOrta Doğu Teknik ÜniversitesiMetalurji ve Malzeme Mühendisliği Bölümü
PROF. DR. CEMİL HAKAN GÜR
PROF. DR. İBRAHİM KARAMAN
- Investigation on mechanical properties of magnesium and copper alloys processed by expansion equal channel angular extrusion
Genişlemeli eşit kanal açısal ekstrüzyon ile işlenen magnezyum ve bakır alaşımlarının mekanik özelliklerinin incelenmesi
SERKAN ÖĞÜT
Doktora
İngilizce
2021
Makine MühendisliğiMarmara ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. AYKUT KENTLİ
DOÇ. DR. HASAN KAYA
- Eş kanalda açısal ekstrüzyon (EKAE) yöntemi uygulanmış Al20Zn-2Cu alaşımının yorulma davranışının incelenmesi
Investigation of fatigue behavior of Al20Zn-2Cu alloy processed by equal channel angular extrusion (ECAE)
YAKUP HEYAL
Doktora
Türkçe
2024
Makine MühendisliğiKaradeniz Teknik ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. MURAT AYDIN
- Çinko-esaslı süperplastik alaşımların geliştirilmesi ve yapısal, mekanik ve titreşim sönümleme davranışlarının incelenmesi
Development of zinc-based superplastic alloys and investigation of structural, mechanical and damping behaviors
MUHAMMET DEMİRTAŞ
Doktora
Türkçe
2017
Makine MühendisliğiKaradeniz Teknik ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. GENÇAĞA PÜRÇEK
- Eş kanallı açısal ekstrüzyon yöntemi ile yüksek dayanımlı IF-çeliğinin geliştirilmesi ve yöntemin bu çelikten üretilen saclara uygulanması
Development of high strength if-steel by equal channel angular extrusion and application of the method to IF-steel sheets
ONUR SARAY
Doktora
Türkçe
2013
Makine MühendisliğiKaradeniz Teknik ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. GENÇAĞA PÜRÇEK