Farklı yöntemler kullanılarak grafen oksit sentezin karakterizasyonu
Characterization of graphene oxide synthesis using different methods
- Tez No: 711106
- Danışmanlar: PROF. DR. AHMET YARTAŞI
- Tez Türü: Yüksek Lisans
- Konular: Kimya Mühendisliği, Chemical Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2021
- Dil: Türkçe
- Üniversite: Çankırı Karatekin Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Kimya Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 66
Özet
Grafitten grafen oksit sentezinde, Brodie, Staudemeair, Hummers ve Modifiye Hummers yöntemlerinin, kıyaslanmasının hedeflendiği bu çalışma, dört aşamadan oluşmaktadır. Birinci aşamada Brodie yöntemi, ikinci aşamada Staudenmeair yöntemi, üçüncü aşamada Hummers yöntemi ve son aşamada ise Modifiye Hummers yöntemi ile çalışılmıştır. Her aşamada deney öncesinde grafite uygulanan üç farklı ön işlemin etkisi üzerinde yoğunlaşılmıştır. Birinci durumda grafite herhangi bir ön işlem yapılmamıştır. İkinci durumda grafite ultrasonikasyon işlemine tabi tutulmuştur. Üçüncü durumda ise grafit örneği 200ºC'de 3 saat boyunca ön ısıtma işlemi gerçekleştirilmiştir. Grafen oksit sentezinin karakterizasyonu için altı adet kalite kriteri incelenmiştir. İncelenen kalite kriterleri sırasıyla, EDX analiziyle; karbonun oksijene atomik oranı (C/O), RAMAN analizi ile D piki yoğunluğunun G piki yoğunluğuna oranı (ID/IG), BET analizi ile yüzey alanı ölçümü (YA), ZETA-SIZER analizi ile parçaçık boyutu dağılım (PB) analizi, polidispersite indeks (PDI) değeri ve zeta potensiyeli (ZP) ölçümü olarak belirlenmiştir. Kalite kriterlerinin performansları birlikte değerlendirildiğinde, Modifiye Hummers yöntemi ile sentezlenen grafen oksitin perfomansı diğer yöntemlere göre sentezlenen grafen oksitten çok daha iyi çıkmıştır. Bu şartlara göre C/O = 1.81, ID/IG = 0.74, Y.A = 42.54 m*m/g, PB = 128 nm, PDI = 0.54, ZP = -40.10 mV. olarak elde edilmiştir.
Özet (Çeviri)
This study, which aims to compare the methods of Brodie, Staudemeair, Hummers, and Modified Hummers in graphene oxide synthesis from graphite, consists of four stages. In the first step, the Brodie Method, the Staudenmeair Method in the second step, the Hummers Method in the third step, and the Modified Hummers Method in the last step, graphene oxide synthesis has been studied using the Modified Hummers Method in the second stage. At each stage, the effect of three different pretreatments applied to graphite has concentrated on the effect of the experiment. In the first case, no pre-treatment of graphite has carried out. In the second case, graphite has applied to the ultrasonication process. In the third case, the graphite sample is preheated at 200ºC for 3 hours. Six quality criteria have been analyzed for the characterization of graphene oxide synthesis. The quality criteria have been analyzed, the atomic ratio of carbon to oxygen (C/O) by EDX analysis, the ratio of the peak density D to the peak density G (ID/IG) by RAMAN analysis, surface area measurement (YA) by BET analysis, particle size distribution (PB) analysis, polydispersity indeks (PDI) value and zeta potential (ZP) by ZETA-SIZER analysis. The performance of the quality criteria has evaluated together, the performance of the GO-MH1 coded experiment is better than other experiments. According to this condition, C/O = 1.81, ID/IG = 0.74, Y.A = 42.54 m*m/g, PB = 128 nm, PDI = 0.54, ZP = -40.10 mV.
Benzer Tezler
- Fonksiyonel grafen türevleri ile desteklenmiş metal nanokümelerinin sentezi, karakterizasyonu ve etilendiamin-bisboran'dan hidrojen üretimindeki katalitik performanslarının araştırılması
Synthesis and characterization of metal nanoclusters supported by functionalized graphene derivatives and the investigation of catalytic performance in the hydrogen production from ethylendiamine-bisborane
YAŞAR KARATAŞ
- Synthesis, characterization and biocompatibility tests of magnetic nanoparticles
Manyetik nanopartiküllerin sentezlenmesi, karakterizasyonu ve biyouyumluluk testlerinin gerçekleştirilmesi
AYSA AZMOUDEH
Yüksek Lisans
İngilizce
2023
Metalurji Mühendisliğiİstanbul Teknik ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
DOÇ. DR. DUYGU AĞAOĞULLARI
- Synthesis and characterization of amide containing polybenzoxazines from bio-based compounds
Biyo bazlı bileşiklerden amid içeren polibenzoksazinlerin sentezi ve karakterizasyonu
EMİNE YILMAZ
Yüksek Lisans
İngilizce
2024
Polimer Bilim ve Teknolojisiİstanbul Teknik ÜniversitesiKimya Ana Bilim Dalı
PROF. DR. BARIŞ KIŞKAN
- Kimyasal,termal ve mikrodalga destekli indirgenmiş grafen oksit katkılı tio2 içeren nanokompozit malzemelerin sentez karakterizasyonu ve fotokatalitik aktivitelerin incelenmesi
Synthesis, characterization and investigation of photocatalytic activities of chemical, thermal and microwave assisted reduced graphene oxide doped tio2 containing nanocomposite materials
MARWAH ALI IBRAHIM
Yüksek Lisans
Türkçe
2024
Fizik ve Fizik MühendisliğiSelçuk ÜniversitesiFizik Ana Bilim Dalı
DOÇ. DR. HALİT ÇAVUŞOĞLU
DOÇ. DR. TEOMAN ÖZTÜRK
- Syntheses, characterizations, and device fabrications of organic molecules for energy storage devices
Enerji depolama cihazlarında kullanılmak üzere organik moleküllerin sentezi, karakterizasyonu ve cihaz uygulamaları
SEBAHAT TOPAL