Experimental behavior monitoring of cold-formed steel members by feature tracking
Hafif çelik elemanların deneysel davranışlarının özellik izleme yöntemi ile takibi
- Tez No: 759299
- Danışmanlar: DOÇ. DR. BURCU GÜLDÜR ERKAL
- Tez Türü: Yüksek Lisans
- Konular: İnşaat Mühendisliği, Civil Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2022
- Dil: İngilizce
- Üniversite: Hacettepe Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: İnşaat Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 44
Özet
Son yıllarda kullanımı artan soğuk şekillendirilmiş çelik elemanların davranışsal özellikleri, eksenel basma ve eğilme testleri de dahil olmak üzere standart testler ile belirlenmektedir. Testler sırasında, çeşitli sensörler kullanılarak, yer değiştirme ve gerinim gibi fiziksel değişimler ölçülebilir. Yerel yer değiştirmeler genellikle LVDT'ler olarak bilinen, doğrusal değişken diferansiyel transformatörler, kullanılarak ölçülür. LVDT'ler test numunesi üzerine dikkatlice yerleştirilir ve kayıt cihazına bağlanır. LVDT'ler deneysel testlerde oldukça yaygın kullanılsa da birkaç dezavantajı vardır. LVDT kurulum süreci özel uzmanlık gerektirir ve zaman alıcıdır. Ayrıca, tüm veri toplama sistemi genellikle pahalıdır. Bu araştırmada, alternatif bir yer değiştirme ölçüm metodolojisi oluşturmak için uzaktan ve uygulaması kolay, mevcut olan yöntemlerden daha ekonomik ve sürdürülebilir olan yeni bir görüntü işleme tabanlı yer değiştirme ölçüm yöntemi geliştirilmiştir. soğuk şekillendirilmiş çelik elemanların eksenel basınç testleri sırasında sabit bir konumdan kaydedilen test videoları, test elemanının yer değiştirmelerini otomatik olarak ölçmek için kullanılmıştır. Elde edilen deplasman verileri, geliştirilen metodolojinin doğruluğunu sorgulamak için; test sırasında kaydedilen LVDT ölçümleriyle karşılaştırılır. Sonuçlar, geliştirilen görüntü işleme tabanlı yöntemin yer değiştirme hesaplarında umut verici bir yöntem olduğunu göstermektedir. Ancak görüntü kalitesinin yeterli olmadığı için; önerilen yöntem kullanılarak eksenel basınç deneylerinin başlangıcında oluşturduğu küçük yer değiştirme değerlerinin ölçülmesinde hatalı sonuçlar vermektedir. Yer değiştirme değerleri arttıkça belirlenen görüntü tabanlı yer değiştirme değerleri, kaydedilen yer değiştirme değerleri ile örtüşmektedir.
Özet (Çeviri)
Behavioral properties of cold-formed steel (CFS) members, the use of which has increased in recent years, are determined by standard tests, including axial compression and bending tests. During experimental testing, various sensors record physical changes of the test specimen, such as local displacements and strains. The local displacements are generally measured using linear variable differential transformers, commonly known as LVDTs. The LVDTs are positioned carefully on the test specimen and connected to a data acquisition device. Even though LVDTs are quite common in experimental testing, it has various disadvantages. The LVDT setup process requires particular expertise and is time-consuming. Besides, the entire data acquisition system is usually pricey. In this research, a novel image processing-based displacement measurement procedure, which is more economical and sustainable, is developed to create an alternative hands-off and easy-to-implement displacement measurement method. First, the test videos recorded from a fixed position during the axial compression tests of CFS columns have been used to extract the test member's displacements automatically. The obtained displacement tracking results are then compared with the LVDT measurements recorded during testing to verify the accuracy of the developed methodology. The general results showed that video-based image processing is a promising method for displacement recording. However, the proposed method fails to capture the small displacement values recorded at the beginning of the axial compression tests as the image resolution is not sufficient. Nevertheless, the determined image-based displacement values match with the recorded displacement values as the displacement values increase.
Benzer Tezler
- Linyit yakan değişik dağıtıcı elekli akışkan yataklarda ayrışma ve aglomerasyon
Segregation and agglomeration in lignite burning fluidised beds with different distrubutor plates
M.FERHAT YARDIM
- Structural health monitoring of frp composites using fbg sensors
Frp kompozitlerin yapısal sağlık takibinin fbg sensörler kullanılarak gerçekleştirilmesi
ERDEM AKAY
Doktora
İngilizce
2018
Havacılık Mühendisliğiİstanbul Teknik ÜniversitesiUçak ve Uzay Mühendisliği Ana Bilim Dalı
PROF. DR. HALİT SÜLEYMAN TÜRKMEN
PROF. DR. MEHMET YILDIZ
- Gaz türbini motorlarının (GTM) test standında ve yer çalıştırmasında diagnostik amaçlı izlenmesi ve değerlendirilmesi
The Monitoring and evaluation of gas turbine engines (APU) for diagnostic purposes at test stand and ground service
MEHMET AYAZ
Yüksek Lisans
Türkçe
2002
Makine MühendisliğiMarmara ÜniversitesiMakine Eğitimi Ana Bilim Dalı
PROF. DR. MUSTAFA KURT
- DIN 115CrV3 çeliğinden; ısıl işlemli, TiN ve CrN ile kaplamalı üretilen kesici uçların, mikroyapı ve kesme performansının incelenmesi
Investigation of microstructural characteristics and cutting performance of hardened cutting tools from DIN 115CrV3 steel coated with TiN and CrN
MUSTAFA ÖZGÜR ÖTEYAKA
Doktora
Türkçe
2013
Makine MühendisliğiDumlupınar ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. M. MUSTAFA YILDIRIM
- Deri sağlığını geliştirme programının genç çalışanlarda deri semptomlarını azaltma ve koruyucu sağlık davranışları geliştirmeye etkisi
Effects of skin promotion program on reduce occupational skin diseases symptoms and improvement of protective health behaviors
EMİNE AKTAŞ KURTULUŞ
Doktora
Türkçe
2017
Dermatolojiİstanbul ÜniversitesiHalk Sağlığı Hemşireliği Ana Bilim Dalı
PROF. DR. MELEK NİHAL ESİN