Geri Dön

Flexural response and design of cold-formed steel purlin

Soğuk biçimlendirilmiş çelik aşıkların (kirişlerin) eğilme tepkisi ve tasarımı

  1. Tez No: 772219
  2. Yazar: FATİH YILMAZ
  3. Danışmanlar: Belirtilmemiş.
  4. Tez Türü: Yüksek Lisans
  5. Konular: İnşaat Mühendisliği, Civil Engineering
  6. Anahtar Kelimeler: Cold-Formed Steel, thin-walled structures, analytical model, Z- purlin, purlin-sheeting system, numerical model, parametric studies, finite element method, finite strip method
  7. Yıl: 2017
  8. Dil: İngilizce
  9. Üniversite: The University of Birmingham
  10. Enstitü: Yurtdışı Enstitü
  11. Ana Bilim Dalı: Belirtilmemiş.
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 36

Özet

The aim of this study was to explore and develop a further understanding of the behaviour of different cold-formed steels of different thicknesses on the elastic buckling parameters for local, distortional, and global buckling for cold-formed steel. Firstly, four Z-section purlins were made in experimental tests and as a result of failure modes, the ultimate loads and corresponding load-displacement and momentcurvature curve response was calculated. The ultimate moment capacity obtained during the experiment were compared to the codified design provisions in EN 1993- 1-3 and the moment resistance from ABAQUS. The materials' strain-stress curve was then digitised to be inputted into ABAQUS, because the strain-stress curve needs to be transformed into true value. Using the modified material stress-strain curve, the four Z-sections were modelled on ABAQUS and compared to the experimental data. On the basis of these validation studies, geometric imperfection was chosen to obtain the nearest moment resistance and clear mode shape. Furthermore, a suite of simplified methods was identified to determine the elastic buckling parameters used to predict capacity with the finite strip method (FSM) and finite element method (FEM) for 59 Z-section members. ultimate moment capacity is derived from the FEM and FSM each type of cold-formed steel was compared to establish global and distortional buckling to enhance numerical study on the cold-formed steel.

Özet (Çeviri)

Özet çevirisi mevcut değil.

Benzer Tezler

  1. Deprem kuvvetlerine karşı betonarme perdelerin davranışı ve boyutlandırılması

    The Behaviour and design of reinforced concrete structural walls for earthquake resistance

    YILDIR AKKAYA

    Yüksek Lisans

    Türkçe

    Türkçe

    1997

    İnşaat Mühendisliğiİstanbul Teknik Üniversitesi

    İnşaat Mühendisliği Ana Bilim Dalı

    PROF. DR. ZEKAİ CELEP

  2. Yangın koşullarında betonarme yapı elemanlarının Eurocode'a göre tasarımı

    Design of reinforced concrete structural members under fire conditions according to Eurocode

    UĞUR GÜNAY

    Yüksek Lisans

    Türkçe

    Türkçe

    2023

    İnşaat Mühendisliğiİstanbul Teknik Üniversitesi

    İnşaat Ana Bilim Dalı

    PROF. DR. TURGUT ÖZTÜRK

    DR. ÖĞR. ÜYESİ SERDAR ULUSOY

  3. Development of automobile chassis parts via aluminum extrusion and sand casting technology

    Otomobil şasi parçalarının alüminyum extrüzyon ve kum döküm yöntemi ile geliştirilmesi

    ONUR DEMİREL

    Yüksek Lisans

    İngilizce

    İngilizce

    2012

    Metalurji MühendisliğiOrta Doğu Teknik Üniversitesi

    Metalurji ve Malzeme Mühendisliği Ana Bilim Dalı

    PROF. DR. ALİ KALKANLI

  4. Yüksek mukavemetli betonların kırılma parametreleri

    Practure parameters of high strength concretes

    AYHAN ÇAKIR

    Yüksek Lisans

    Türkçe

    Türkçe

    1995

    İnşaat Mühendisliğiİstanbul Teknik Üniversitesi

    DOÇ.DR. M. ALİ TAŞDEMİR

  5. Farklı taşıyıcı sistemli krenin analizi

    Analysis of the different main frame of the bridge cranes

    CANER KARA

    Yüksek Lisans

    Türkçe

    Türkçe

    2008

    Makine MühendisliğiDokuz Eylül Üniversitesi

    Makine Mühendisliği Bölümü

    PROF. DR. MİNE DEMİRSOY