Geri Dön

Low-temperature oxidation behaviour of fine uo2 powders in moisturized atmospheres

Başlık çevirisi mevcut değil.

  1. Tez No: 841613
  2. Yazar: OĞUZ BERK ÖZDEMİR
  3. Danışmanlar: DR. GREGORY LEINDERS
  4. Tez Türü: Yüksek Lisans
  5. Konular: Metalurji Mühendisliği, Nükleer Mühendislik, Metallurgical Engineering, Nuclear Engineering
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2018
  8. Dil: İngilizce
  9. Üniversite: Institut Polytechnique LaSalle Beauvais
  10. Enstitü: Yurtdışı Enstitü
  11. Ana Bilim Dalı: Belirtilmemiş.
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 59

Özet

The sequence of oxidation behavior at low-temperature (between 40 °C and 190 °C) of a variety of fine UO2 powders under humid atmosphere has been investigated by simultaneous thermogravimetric analysis and x-ray diffraction. A systematic comparison of the oxidation of powders with different specific surface area (SSA) prepared by the ADU process in dry and humid condition was performed. Small parameter change in the UO2 powder preparation by the ADU route led to significant changes in the obtained SSA. It was found that centrifugation, used in this thesis to separate the precipitated ADU from ammonia, provided significantly lower SSA than vacuum filtering previously employed [1-4]. In humid atmosphere at low temperature the sequence of UO2 oxidation reaction was found to be the same as in dry air, UO2 → U4O9 →U3O7 At almost all the temperatures (40, 70, 100, 130 and 160 °C) tested, it was found that humid atmosphere conditions leads to more oxidation than in dry air. Only at 190 °C does dry air lead to more oxidation than moisturized air.

Özet (Çeviri)

Özet çevirisi mevcut değil.

Benzer Tezler

  1. Farklı hidrojen-karbon ortamlarında indirgenen seramik yakıt tabletlerinin karakterizasyonu

    Başlık çevirisi yok

    BİRSEN AYAZ

    Doktora

    Türkçe

    Türkçe

    1998

    Nükleer Mühendislikİstanbul Teknik Üniversitesi

    Nükleer Mühendislik Ana Bilim Dalı

    PROF. DR. A. NEZİHİ BİLGE

  2. Yüksek azot içeren çökeltme ile sertleştirilebilir ostenitik paslanmaz çelikler

    Precipitation hardening austenitic stainless steels

    GÜLHAN TÜYSÜZ

    Yüksek Lisans

    Türkçe

    Türkçe

    1999

    Makine Mühendisliğiİstanbul Teknik Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    DOÇ. DR. MEHMET DEMİRKOL

  3. Kaynak edilebilen kobalt ve demir esaslı alaşımların yüksek sıcaklıkdaki aşınma davranışları

    High temperature wear behaviour of weldable cobalt and iron based alloys

    HALİS ÇELİK

    Doktora

    Türkçe

    Türkçe

    1991

    Makine Mühendisliğiİstanbul Teknik Üniversitesi

    PROF.DR. E. SABRİ KAYALI

  4. Yaşlandırma ile sertleştirilebilen magnezyum-alüminyum alaşımlarının özelliklerinin geliştirilmesi

    The Development of magnesium-aluminium alloys age hardened

    HANIM DOĞAN

    Yüksek Lisans

    Türkçe

    Türkçe

    1991

    Metalurji Mühendisliğiİstanbul Teknik Üniversitesi

    PROF.DR. NİYAZİ ERUSLU

  5. Bazı Türk linyitlerinin kükürt içeriklerinin azaltılması

    Başlık çevirisi yok

    SERDAR YAMAN

    Doktora

    Türkçe

    Türkçe

    1996

    Kimya Mühendisliğiİstanbul Teknik Üniversitesi

    PROF.DR. SADRİYE KÜÇÜKBAYRAK