Üç boyutlu astrojeodezik dik koordinat sistemlerinde dönüşüm modelleri ve uyuşumsuz ölçü gruplarının belirlenmesi yöntemlerinin karşılaştırılması
Transformation models for three-dimensional astrogeodetic cartesian coordinate system and comparison of the techniques used for determining outlier measurements groups
- Tez No: 139224
- Danışmanlar: PROF. DR. ASLAN DİLAVER
- Tez Türü: Doktora
- Konular: Jeodezi ve Fotogrametri, Geodesy and Photogrammetry
- Anahtar Kelimeler: Three-dimensional Cartesian Coordinate Systems, Transformation Models Coordinate Systems, The Least Square Adjustment Method, Outlier Determination Methods, Traditional Approaches, Robust Estimation Method, Fuzzy Logic Technique. VII
- Yıl: 2003
- Dil: Türkçe
- Üniversite: Karadeniz Teknik Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Jeodezi ve Fotogrametri Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 157
Özet
ÖZET Yeryüzeyinde yapılan tüm çalışmaların temelim oluşturan ortak bir koordinat sistemine ihtiyaç duyulmuş ve bu nedenle çeşitli koordinat sistemleri tanımlanmıştır. Teknolojik gelişmelerle birlikte ölçme ve hesaplama yöntemleri de gelişmiştir. Önceleri bu ya da iki boyutlu tanımlanıp daha sonra birleştirilen nokta koordinatları doğrudan üç boyutlu olarak hesaplanmaya başlanmıştır. Üç boyutlu dik koordinat sistemleri arasındaki ilişkiler yardımıyla tanımlanan koordinat dönüşüm modelleri, jeodezide en çok kullanılan uygulamalardan biri olmuştur. Jeodezik çalışmalarda fazla sayıda ölçü yapılarak sonuçların doğruluğu ve güvenirliği artırmak sürekli temel ilke olmuştur. Ölçülerden en uygun çözümü bulabilmek için En Küçük Kareler Yöntemi (EKKY) ile çözüm yapılır, fakat ölçüler çeşitli hataları da içermektedir. Belirlenemeyen uyuşumsuz ölçüler EKKY ile elde edilen sonuçlan bozarlar. Bu nedenle EKKY sonuçlarına göre geliştirilen geleneksel çözüm yöntemleri birden fazla uyuşumsuz ölçüleri belirlemekte başarısız olurlar ve uyuşumsuzluklan diğer ölçülere yayarlar. Ayrıca, iteratif çözüm yapılarak uyuşumsuz ölçülerin ölçme grubundan çıkarılması bu yöntemin diğer olumsuz yönüdür. Bu nedenlerle uyuşumsuz ölçülerin belirlenmesi için robust kestirim yöntemleri ve fuzzy mantık yöntemleri kullanılması fikri ortaya çıkmıştır. Bu çalışmada incelenen yöntemler, geliştirilen bilgisayar programlan yardımıyla bir test ağında uygulanmış ve sonuçlar karşılaştınlarak yöntemlerin olumlu ve olumsuz yönleri belirlenmeye çalışılmıştır. Anahtar Kelimeler : Üç Boyutlu Dik Koordinat Sistemleri, Koordinat Dönüşüm Modelleri, En Küçük Kareler Yöntemi, Uyuşumsuz Ölçülerin Belirlenmesi Yöntemleri, Geleneksel Çözüm Yöntemi, Robust Kestirim Yöntemi, Fuzzy Mantık Yöntemi. VI
Özet (Çeviri)
SUMMARY Transformation Models For Three-Dimensional Astogeodetic Cartesian Coordinate Systems and Comparison of The Techniques Used For Determining Outlier Measurements Groups There has been always a need for a common coordinate system to base all the measurements on the Earth; therefore, various coordinate systems have been defined to meet this expectation. In parallel to recent technological developments, new measurement and estimation techniques have been introduced. Coordinates of the points, which were initially defined and used as two-dimensional coordinates, have been started to be directly obtained as three-dimensional coordinates. Transformation models defined by the relationships between three-dimensional Cartesian coordinate systems have been one of the main objectives of the applications in geodesy. Making large number of measurements to increase the accuracy and reliability has always been an essential principal in geodetic studies. In order to find the best solution for the measurements, the Least Square Adjustment Method (LSAM) is generally used, but the measurements still contain some errors. Undetermined outlier measurements impair the results produced by the LSAM. Therefore, traditional methods using LSAM results fail to determine more than a single measurement and they spread the blundering to other measurements. Also, another drawback of such techniques is their iterative nature to eliminate the outlier measurements from the data set. In order to get over these drawbacks and determine the outlier measurements, robust estimation and fuzzy logic methods have been introduced. Methods investigated in this study are applied to a test network using in-house computer programs and the results are analysed to determine the advantages and disadvantages of the techniques.
Benzer Tezler
- Astrojeodezik nivelman ile yerel jeoit belirleme: Konya örneği
Geoid determination using astrogeodetic leveling: A case study in Konya
YENER TÜREN
Yüksek Lisans
Türkçe
2010
Jeodezi ve FotogrametriSelçuk ÜniversitesiHarita Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. AYDIN ÜSTÜN
- Kampüs nivelman ağında değişik baz uzunluklarına göre nivelman-elipsoidal yükseklik farklarının karşılaştırılması
Compare of the differances obtined from levelling and ellipsoidal heights according to several base distances in campus net
OĞUZ KAYA
Yüksek Lisans
Türkçe
2006
Jeodezi ve FotogrametriSelçuk ÜniversitesiJeodezi ve Fotogrametri Mühendisliği Ana Bilim Dalı
Y.DOÇ.DR. AYHAN CEYLAN
- Üç boyutlu uzayda dengede olmayan difüzyonun cellular automaton ile simülasyonu
Study of non-equtibrium diffusion on a cellular automaton in three dimensional space
MAHMUT EKEN
Doktora
Türkçe
1999
Fizik ve Fizik MühendisliğiGazi ÜniversitesiFizik Ana Bilim Dalı
PROF. DR. NEVZAT AKTEKİN
- Parallel compuutations of three dimensional euler equations
Üç boyutlu zamana bağlı evler denklemlerinin paralel hesaplanması
ÖZGÜR ERTUNÇ
Yüksek Lisans
İngilizce
1998
Uçak MühendisliğiOrta Doğu Teknik ÜniversitesiHavacılık Mühendisliği Ana Bilim Dalı
DOÇ. DR. MEHMET ŞERİF KAVSAOĞLU