Geri Dön

CTP profillerle depreme dayanıklı yapı modellemeleri ve analizleri

Modelling and analysing earthquake resistant building with GRP profiles

  1. Tez No: 168004
  2. Yazar: ONUR ÖZTÜRK
  3. Danışmanlar: Y.DOÇ.DR. MEHMET SARIBIYIK
  4. Tez Türü: Yüksek Lisans
  5. Konular: İnşaat Mühendisliği, Civil Engineering
  6. Anahtar Kelimeler: Cam Elyaf, Reçine, Profil Çekme, Pultruzyon, Cam Takviyeli Plastik (CTP), Depreme Dayanıklı Yapı, Statik Analiz, Dinamik Analiz. Yeryüzü hareketlerinden biri olan deprem, insanlık tarihi boyunca çok ciddi felaketlere yol açmıştır. Ülkemizde, en aktif deprem kuşaklarından biri olan Kuzey, Doğu ve Batı Anadolu fay hatlarının üzerinde olması
  7. Yıl: 2006
  8. Dil: Türkçe
  9. Üniversite: Sakarya Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Yapı Eğitimi Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 140

Özet

ÖZET

Özet (Çeviri)

MODELLING AND ANALYSING EARTHÇUAKE RESISTANT BUILDING WITH GRP PROFILES SUMMARY Key Word: Glass Fibre, Resin, Pultruded, Pultruzyon, Glass Reinforced Plastic (GRP), Earthquake Resistant Building, Static Analysis, Dynamic Analysis. The earthquake, which is öne of the grounds activities, has brought the serious disasters since the human beings. Active earthquake zones named as North Anatolian, East Anatolian and West Anatolian Fay Zone, take part on our country. in that situation the people came out that they must get used to live with earthquake. The earthquake force is lateral and dynamic forces. The basic principle of the physic is F = m x a (Force = mass x acceleration). The acceleration, is an earthquake acceleration and is unable to control with current technologies. Therefore; if the acceleration is not controlled, the mess must reduced for the less forces that effect on structure. in order to produce a lighter buildings many investigations have been carried out with new methodologies and earthquake resistant structural materials. Öne of the new technological materials is Pultruded Glass Fibre Reinforced Plastic (GRP) materials. in this study; the steal construction model has been established and simulated with the Pultruded GRP structure, which are under the dynamic and static load effects. The model structures have been analysed using finite element program. The outcomes of the GRP construction was compared with steal structure and an alternative model has been established. XV

Benzer Tezler

  1. İnce cidarlı çelik takviyeli CTP yapısal elemanlarının tasarımında ince cidarlı çelik yapı hesap standartlarının kullanılabilirliği

    Using inventions related, which is the greatest obtacle for use of GRP composites as structural elements

    FATİH ŞEKÜR

    Yüksek Lisans

    Türkçe

    Türkçe

    2005

    Deprem MühendisliğiGebze Yüksek Teknoloji Enstitüsü

    Deprem ve Yapı Bilimleri Ana Bilim Dalı

    Y.DOÇ.DR. BÜLENT AKBAŞ

  2. Pultruzyon metodu ile üretilmiş CTP profillerle sera modellemesi

    Modelling of greenhouse with CTP profiles produced by pultrusion method

    ALPER CUMHUR

    Yüksek Lisans

    Türkçe

    Türkçe

    2007

    Mühendislik BilimleriSakarya Üniversitesi

    Yapı Eğitimi Ana Bilim Dalı

    YRD. DOÇ. DR. MEHMET SARIBIYIK

  3. S355JR kalite çelik profiller ile CTP profillerin mekanik özellikleri ve yorulma davranışlarının karşılaştırılması

    Comparison of mechanical properties and fatigue behaviors of S355JR quality steel profiles and GRP profiles

    ECE AYDAN AYDINLI

    Yüksek Lisans

    Türkçe

    Türkçe

    2021

    Metalurji MühendisliğiKarabük Üniversitesi

    Metalurji ve Malzeme Mühendisliği Ana Bilim Dalı

    PROF. DR. HAYRETTİN AHLATCI

  4. CTP kompozit profillerin darbe yükü etkisi altındaki davranışının sonlu elemanlar metodu ile incelenmesi

    Investigating the behavior of GFRP composite profiles under impact loads using finite element method

    TUĞÇE ÇİMŞİR

    Yüksek Lisans

    Türkçe

    Türkçe

    2024

    İnşaat MühendisliğiSakarya Üniversitesi

    İnşaat Mühendisliği Ana Bilim Dalı

    DOÇ. DR. ZEYNEP YAMAN

    DR. MOHAMMAD MANZOOR NASERY

  5. Pultruzyon metoduyla üretilmiş CTP profillerin şekil ve boyutlarının eğilme ve basınç dayanımlarına etkileri

    The impacts of shapes and dimensions of GFRP profiles produced by pultrusion method to bending and compressive strength

    GÜRKAN YILDIRIMER

    Yüksek Lisans

    Türkçe

    Türkçe

    2011

    Teknik EğitimSakarya Üniversitesi

    Yapı Eğitimi Ana Bilim Dalı

    DOÇ. DR. MEHMET SARIBIYIK