Geri Dön

Accuracy assessment of digital elevation models derived from shuttle radar topography mission (SRTM)

SRTM uydusundan elde edilen sayısal yükseklik modellerinin doğruluk değerlendirmeleri

  1. Tez No: 183256
  2. Yazar: UMUT GÜNEŞ SEFERCİK
  3. Danışmanlar: DOÇ. DR. GÜRCAN BÜYÜKSALİH
  4. Tez Türü: Yüksek Lisans
  5. Konular: Jeodezi ve Fotogrametri, Geodesy and Photogrammetry
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2006
  8. Dil: İngilizce
  9. Üniversite: Zonguldak Karaelmas Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Jeodezi ve Fotogrametri Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 115

Özet

Digital elevation models (DEMs) are a basic component of any geo information system (GIS). The terrain can not only be described by the horizontal components; the height belongs to complete information. In addition height models are required for the generation of orthoimages – one of the most often used photogrammetric product. DEMs can be generated by laser scanning, photogrammetric methods or interferometric synthetic aperture radar (InSAR). In any case it is time consuming and expensive. The worldwide lack of qualified and accessible DEMs has been improved with the Shuttle Radar Topography Mission (SRTM) in February 2000. Based on InSAR height models have been generated covering the world from 56° southern up to 60.25° northern latitude. The DEMs based on the US C-band are available free of charge in the internet (http://edcsgs9.cr.usgs.gov/pub/data/srtm/) with a spacing of 3arcsec, corresponding to approximately 92m at the equator. Only for the USA the data with a spacing of arcsec (~30m at the equator) are also in the WEB. The DEMs based on the German / Italian Xband can be ordered from the DLR, Germany with a spacing of 1 arcsec. In the area of Zonguldak, Turkey, C-band and also X-band height models have been investigated.

Özet (Çeviri)

Digital elevation models are a basic component for any GeoInformation system (GIS), they are required for the generation of orthoimages and correct geometric handling of single images. The generation of height models can be based on stereo photogrammetry, laser scanning and interferometric synthetic aperture radar (InSAR). In any case it is time consuming and expensive. With the Shuttle Radar Topography Mission (SRTM) height models have been generated, covering the earth surface from 56° south to 60.25° north. With the exception of small gaps in steep parts, dry sand deserts and water surfaces the free available US C-band data are covering the area completely while the X-band data, distributed by the DLR, are covering it only partially. In the area of ZonguldakSRTM C-band and X-band height models are available together with reference data. The accuracy and accuracy characteristics of the SRTM height models shall be investigated in the Zonguldak area. This shall include the dependency upon terrain coverage by forest, the dependency upon the terrain inclination and aspects. In addition the loss of accuracy by interpolation shall be analysed.

Benzer Tezler

  1. Farklı sayısal yüzey modellerinin doğruluk değerlendirmesi

    Accuracy assessment of different digital surface models

    BARIŞ BEŞOL

    Yüksek Lisans

    Türkçe

    Türkçe

    2021

    Jeodezi ve Fotogrametriİstanbul Teknik Üniversitesi

    Geomatik Mühendisliği Ana Bilim Dalı

    DOÇ. DR. UĞUR ALGANCI

  2. Farklı veri kaynakları ile elde edilen sayısal yükseklik modellerinin doğruluk analizi ve kalite değerlendirmesi

    Accuracy analysis and quality assesment of digital elevation models from different data sources

    FATİH ESİRTGEN

    Yüksek Lisans

    Türkçe

    Türkçe

    2010

    Jeodezi ve FotogrametriYıldız Teknik Üniversitesi

    Jeodezi ve Fotogrametri Mühendisliği Ana Bilim Dalı

    DOÇ. DR. NACİ YASTIKLI

  3. Coğrafi bilgi sistemiyle Akşehir (Konya) çevresinin heyelan duyarlılık incelenmesi

    Landslide susceptibility assessment of vicinity of Akşehir (Konya) using geographic information systems

    TOLGA ALTURAL

    Yüksek Lisans

    Türkçe

    Türkçe

    2012

    Jeoloji MühendisliğiSelçuk Üniversitesi

    Jeoloji Mühendisliği Ana Bilim Dalı

    DOÇ. DR. ADNAN ÖZDEMİR

  4. Barla Dağı Kuşağı'nda moloz akması duyarlılığının ampirik yaklaşımla bölgesel ölçekte değerlendirilmesi

    Debris flow susceptibility assessment at regional scale based on an empirical approach in the Barla Mountain Belt

    FURKAN KARABACAK

    Yüksek Lisans

    Türkçe

    Türkçe

    2024

    Coğrafyaİstanbul Teknik Üniversitesi

    Katı Yer Bilimleri Ana Bilim Dalı

    PROF. DR. TOLGA GÖRÜM

  5. Göktürk-1 uydu görüntülerinden üretilen sayısal yükseklik modelinin doğruluğunun araştırılması

    Accuracy assessment of digital elevation model derived from Göktürk-1 satellite images

    MUSTAFA AKDENİZ

    Yüksek Lisans

    Türkçe

    Türkçe

    2022

    Jeodezi ve FotogrametriKonya Teknik Üniversitesi

    Harita Mühendisliği Ana Bilim Dalı

    DR. ÖĞR. ÜYESİ LÜTFİYE KARASAKA