Besleme ipliği türlerinin (POY ve FDY) ve filament kesit şekillerinin hava-jeti ile tekstüre edilmiş iplik özelliklerine etkisi
Effects of feeder yarn types (POY and FDY) and filament cross-sectional shapes on the properties of air jet textured yarns
- Tez No: 233550
- Danışmanlar: DOÇ. DR. SUAT CANOĞLU
- Tez Türü: Yüksek Lisans
- Konular: Tekstil ve Tekstil Mühendisliği, Textile and Textile Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2008
- Dil: Türkçe
- Üniversite: Marmara Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Tekstil Eğitimi Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 262
Özet
Diğer tekstüre yöntemleri ile üretilen, esneyebilen tekstüre ipliklerin hacimliliği, üzerlerine uygulanabilen gerilimin büyüklüğüne göre azalırken, hava-jeti ile tekstüre edilmiş ipliklerin geometrik şekli, karşılaşılan gerilimlere karşılık gelen kuvvetler altında değişmeden sabit kalır. Üretimde kullanılan ipliklerin ve prosesin çeşitliliğinden dolayı, hava-jeti ile tekstüre edilmiş iplikler tekstil endüstrisinin her alanında kullanılabilmektedir. Bu çalışmada hava-jeti ile tekstüre işleminde kullanılan besleme ipliklerinin (POY ve FDY) ve bu ipliklerin filament kesit şekillerinin hava-jeti ile tekstüre edilmiş iplik özelliklerine etkisi incelenmiştir.Deneysel bölümde; çekimden sonraki nihai numaraları 150/48 (150 denye 48 filament) olan ve farklı kesitlere sahip POY ve FDY yapılarındaki ipliklerden, farklı tesktüre parametrelerinde hava-jeti ile tekstüre iplikler üretilmiştir. Referans alınan makine parametreleri; POY iplikler için çekim sıcaklığı 130 ? C, POY iplikler için çekim oranı 1,3, tekstüre basıncı 9 bar, üretim hızı 350 metre/dakika, aşırı besleme (=overfeed) %14 ve fikse fırını sıcaklığı 220 ? C'dir. Numune iplikler, basınç, tesktüre hızı ve aşırı besleme oranları değiştirilerek yapılmıştır. Üretilen ipliklerin fiziksel özellikleri test edilmiştir. Test edilen iplik özellikleri; numara tayini, mukavemet testi, kopma uzaması testi, kesit kontrolu, kaynama çekmesi testi, kararsızlık (=instability) testi. Numune ipliklerde dokuma kumaşlarda ise; spektro fotometre ile renk ölçümü, kılcal yükselme (=wicking) testi, kumaş rijitlik testi yapılmıştır. Tekstüre esnasında ise, ipliklerin makinede jet öncesi gerginliği, jet sonrası gerginliği, fikse fırını çıkışı gerginliği ve sarım gerginliği ölçülmüştür. Bu değerler grafikler üzerinde açıklanmıştır. Elde edilen değerler doğrultusunda POY ve FDY besleme ipliklerinden hava-jeti ile tekstüre edilmiş iplikler arasındaki benzerlikler ve farklılıklar incelenmiştir.Sonuç bölümünde, ipliklere uygulanan testlerin sonuçları karşılaştırılmıştır. İpliklerin test edilen özellikleri sonucunda, POY besleme ipliklerinden tekstüre edilen ipliklerin, FDY besleme ipliklerinden tekstüre edilen ipliklere göre daha üstün sonuçlar verdiği görülmüştür.
Özet (Çeviri)
Bulkiness stretch textured yarns produced by most of the texturing methods such as false-twist texturing, stuffer-box texturing decreases with the magnitude of the force applied thereon, while geometrical shape and bulkiness of the air-jet textured yarns remains unchanged under such forces near to their braking load. Owing to the vast diversity of the feeder yarns and process types employed, air-jet textured yarns can be used in every field of textile industry. In this study, the effects of feeder yarns (POY and FDY) used in the air-jet texturing process as well as the filament cross-sectional shapes of such feeder yarns on the properties of the air-jet textured yarns has been investigated.In the experimental study, the air-jet textured yarns with different texturing parameters have been manufactured from feeder yarns as POY and FDY structures, with final numbers of 150/48 (150 Denier, filament 48) and having different filament cross-sections. Reference process parameters have been choosen as the drawing temperature of 130 ? C for POY yarns, draw ratio of 1.3 for POY yarns, texturing air pressure of 9 bar, production speed of 350 meters/minunte, overfeed 14%, and set temperature of 220 ? C. Sample yarns have been made by changing air-pressure, texturing speed and overfeed rates. Physical properties of the yarns manufactured have been subjected to a series of tests. Tested yarn properties have been the yarn count (yarn number), strength/tenacity, breaking elongation, cross-section control, boiling water shrinkage test, instability test. Fabrics are woven with the sample yarns and their color has been measured y spectrophotometer, the wicking test and fabric rigidity test have been performed on those woven fabrics. During texturing process, yarn tension before the jet, and yarn tension after the jet as well as the yarn tension after the fixing (set) heater and winding tensions have been measured. These values are explained through graphical presentations. With all the resultant values obtained from measurements as well as tests, similarities and differences of air-jet air-jet textured yarns from POY and FDY feeder yarns have been explained.In conclusion, the results of the tests applied on yarns have been compared. As a result of all the tested properties of the yarns, the textured yarns from POY feeder yarns have been found to give better performance results compared to those from FDY feeder yarns.
Benzer Tezler
- Effects of the olive extracts on cancer cell lines
Zeytin ekstraktlarinin kanser hücreleri üzerine etkisi
AYSEL KARAGÖZ
Yüksek Lisans
İngilizce
2011
BiyolojiFatih ÜniversitesiBiyoloji Ana Bilim Dalı
PROF. DR. CEVDET NERGİZ
YRD. DOÇ. DR. SEVİM IŞIK
- Besleme ipliği cinsinin yalancı büküm prosesi ile üretilen ipliklerin özellikleri üzerine etkisi
Effect of feed yarn type on the properties of false twist textured yarns
MELTEM ÇAKMAK
Yüksek Lisans
Türkçe
2023
Tekstil ve Tekstil MühendisliğiBursa Uludağ ÜniversitesiTekstil Mühendisliği Ana Bilim Dalı
DOÇ. DR. SERPİL KORAL KOÇ
- Hava-jetli tekstüre işleminde hacimlilik (bulk) incelemesi
Bulkiness of air-jet textured yarns
ARZU GÖNENÇ
Yüksek Lisans
Türkçe
1997
Tekstil ve Tekstil Mühendisliğiİstanbul Teknik ÜniversitesiTekstil Mühendisliği Ana Bilim Dalı
PROF. DR. ALİ DEMİR
- Medikal amaçlı kompresyon ürünlerinde makine ayarlarının basınç özelliklerine etkisi
Effects of machine adjustments on pressure characteristics of medical compression garments
BURAK SARI
Yüksek Lisans
Türkçe
2013
Tekstil ve Tekstil MühendisliğiEge ÜniversitesiTekstil Mühendisliği Ana Bilim Dalı
YRD. DOÇ. NİDA OĞLAKCIOĞLU
- Yuvarlak örme makinelerinde elastan iplik kullanımı
Usage of elastane yarn in circular knitting machines
SERKAN TEZEL
Yüksek Lisans
Türkçe
2007
Tekstil ve Tekstil MühendisliğiUludağ ÜniversitesiTekstil Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. YASEMİN KAVUŞTURAN