Geri Dön

Düz atkı örme kumaşlarda ilmek eğikliğinin iplik özellikleri ile ilişkisi üzerine bir araştırma

Başlık çevirisi mevcut değil.

  1. Tez No: 278
  2. Yazar: FATMA ÇEKEN
  3. Danışmanlar: DOÇ. DR. GÜNGÖR BAŞER
  4. Tez Türü: Yüksek Lisans
  5. Konular: Tekstil ve Tekstil Mühendisliği, Textile and Textile Engineering
  6. Anahtar Kelimeler: Kumaşlar, Tekstil endüstrisi, Örme kumaşlar, Üretim yöntemleri, İplik, Fabrics, Textile industry, Knitted fabrics, Production methods, Yarn
  7. Yıl: 1985
  8. Dil: Türkçe
  9. Üniversite: Ege Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Tekstil Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: Belirtilmemiş.

Özet

Özet yok.

Özet (Çeviri)

been abserved that the angle of spirality seerato increase slightly on thes fabric samples. The conelusions drawn by thes experimental vork will be useful in throwing linht ta subsegment work on this subject and also in find ing solutions particularly to the problems encountered during the production of plain knit fabrics which form a great part of the produc tion of fabrics for underwear and T - shirt.cotton and orlon yarns have been steam set under similar conditions and the amounts of spirality observed on the samples knitted using steam set yarns have been compared. The samples of cloths have been subjected to finishing treatment at three stages, thus enabling the fabrces to attain their relaxed state. For this purpose wet relaxations and washing treatments have been applied respectively on the dry relaixed fabric samples and the chan ges have been examined biy measunrements made on the fabric samples af ter each treatment. As a result of this experi mental work, it has been found that the most important factor affecting spirality on the samples of cooton and orlon fabrics have been the twist liveliness of the yarn due to twist, and it has been observed that the spirality is greater in the fabric samples knitted with high twist yarns. It has been observed that the tensions on the yarn can be partly eliminated by steam setting the yarns and that the angles of spirality decrease by important ampunts ou the fabric knitted with yarns the twists of which are set by steam. It has also been determined that a large amount of these tensions developing through yarn twist can be eliminated by using a two-wold yarn and that the spirality, thus, deceases. In fabric samples knitted with two different count of yarn, however, it has been observed that the fabric stiffness factor decreases in those knitted with finer yarn count and that slacker fabrics are obtained -as compared to the fabrics knitted with coarser yarns. Because of the fact that the twist liveliness is higher in finer count of yarn it has alsobeen abserved that the angle of spirality seerato increase slightly on thes fabric samples. The conelusions drawn by thes experimental vork will be useful in throwing linht ta subsegment work on this subject and also in find ing solutions particularly to the problems encountered during the production of plain knit fabrics which form a great part of the produc tion of fabrics for underwear and T - shirt.

Benzer Tezler

  1. Elektromanyetik koruma etkinliğine sahip atkılı örme kumaş ve kompozitlerinin geliştirilmesi

    Developing of weft-kntted fabric and composite structures that have electromagnetic shielding effectiveness

    DEVRİM DEMİRAY SOYASLAN

    Doktora

    Türkçe

    Türkçe

    2009

    Tekstil ve Tekstil MühendisliğiSüleyman Demirel Üniversitesi

    Tekstil Mühendisliği Ana Bilim Dalı

    YRD. DOÇ. DR. SELÇUK ÇÖMLEKCİ

  2. Compressibility and air permeability of weft knitted rib fabrics from glass yarn

    Cam lifinden yapılan örme kumaşların hava geçirgenliği ve inceliği

    KIYMET SAVCI GÜNEŞ

    Yüksek Lisans

    İngilizce

    İngilizce

    2021

    Tekstil ve Tekstil MühendisliğiGaziantep Üniversitesi

    Tekstil Mühendisliği Ana Bilim Dalı

    YRD. DOÇ. MEHMET ERDEM İNCE

    YRD. DOÇ. HALİL İBRAHİM İÇOĞLU

  3. Dokuma yatak yüzü kumaşlarda hammadde ve kumaş konstrüksiyonunun kumaşın performans ve konfor özelliklerine etkisinin incelenmesi

    Influence of material and fabric construction on performance and comfort properties of mattress ticking woven fabrics

    AYŞEGÜL EROĞLU

    Yüksek Lisans

    Türkçe

    Türkçe

    2022

    Tekstil ve Tekstil MühendisliğiBursa Uludağ Üniversitesi

    Tekstil Mühendisliği Ana Bilim Dalı

    DOÇ. DR. GÜLCAN SÜLE

  4. Dokuma kumaşlarda örgü tipinin ham kumaşın boyutları ve geometrik özellikleri üzerindeki etkilerinin araştırılması

    Başlık çevirisi yok

    EMEL ÖNDER

    Yüksek Lisans

    Türkçe

    Türkçe

    1985

    Tekstil ve Tekstil MühendisliğiEge Üniversitesi

    Tekstil Mühendisliği Ana Bilim Dalı

    DOÇ. DR. GÜNGÖR BAŞER

  5. Moduler robot konstrüksiyonu

    Modular robot construction

    HİKMET KOCABAŞ

    Doktora

    Türkçe

    Türkçe

    1990

    Makine Mühendisliğiİstanbul Teknik Üniversitesi

    PROF.DR. AYBARS ÇAKIR