Kalem ucu grafit elektrotların modifiye edilmesi ile bazik alkol yakıt hücreleri için anot katalizörlerinin hazırlanması
The preparation of anode catalysts for the alkaline fuel cells using modified pencil graphite electrodes
- Tez No: 286877
- Danışmanlar: PROF. DR. HANDAN GÜLCE
- Tez Türü: Yüksek Lisans
- Konular: Kimya Mühendisliği, Chemical Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2011
- Dil: Türkçe
- Üniversite: Selçuk Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Kimya Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 101
Özet
Bu çalışmada, metanol ve etanol gibi küçük molekül kütleli alkollerin bazik ortamdaki elektrokatalitik yükseltgenmesi için katalitik anot elektrotlarının geliştirilmesi amaçlanmıştır.Küçük molekül kütleli alkollerin elektrokatalitik yükseltgenmesi, doğrudan alkol yakıt hücrelerindeki uygulamalarından dolayı önemli bir prosestir. Karbon elektrotlarda alkollerin elektrokimyasal yükseltgenmesi, karbon materyallerinin yüksek yüzey alanına sahip olması ve yakıt hücresi elektrotlarında platin katalizör destek materyali olarak kullanılabilmesinden dolayı daha çok dikkat çekicidir.Bu tez çalışmasında, katalitik elektrotların hazırlanmasında polivinilferrosen ile modifiye edilmiş kalem ucu grafit (KUG) elektrotlar kullanılmıştır. Alkollerin elektrokatalitik yükseltgenmesi, kaplanmamış KUG elektrotlarda, polivinilferrosen ile kaplanmış KUG elektrotlarda ve polivinilferrosen ile kaplanmış ve Pt biriktirilmiş KUG elektrotlarda, dönüşümlü voltametri yöntemi kullanılarak incelenmiştir. Alkollerin elektrokimyasal yükseltgenmesi için kullanılan elektrodun modifiye edilmesi, polimer film kalınlığı, Pt biriktirilmesi, alkollerin derişimi, elektrolit derişimi, gerilim tarama hızı ve sıcaklık gibi çeşitli deneysel parametrelerin etkileri araştırılmıştır. Bazik ortamda alkollerin elektrokimyasal yükseltgenmesi için optimum koşullar belirlenmiştir. PVF kaplanmış ve Pt biriktirilmiş KUG elektrodun alkollerin yükseltgenmesinde iyi bir katalitik aktivite gösterdiği bulunmuştur. Ayrıca, hazırlanan elektrotların SEM görüntüleri alınarak morfolojik analizleri de yapılmıstır. SEM sonuçları da KUG elektrot yüzeyinin PVF ile kaplandığını ve PVF kaplanmış KUG elektrotta Pt partiküllerinin biriktirildiğini kanıtlamıştır.
Özet (Çeviri)
The aim of this study is to develop new modified electrodes for electrocatalytic oxidation of some low molecular weight alcohols, such as methanol and ethanol.The electrocatalytic oxidation of low molecular weight alcohols have been the essential subject for extensive studies in view of its importance in fuel cell application. The electrochemical oxidation of alcohols on carbon electrodes has received more attention because of the use of high surface area carbon materials as platinum catalyst supports in fuel cell electrodes.The electrocatalytic oxidation of small alcohol molecules is an important process because of its important application in the direct alcohol fuel cell, which is considered as the most feasible fuel cell in future electrical powered vehicles. Direct alcohol fuel cells attract much attention because they can directly, continuously convert the chemical energy of alcohol to electrical energy with high power density, high energy conversion efficiency, and very low environmental intrusion.To prepare the electrocatalytic electrodes which were developed in this thesis, polyvinylferrocene modified pencil graphite (KUG) electrodes were used. Electrocatalytic oxidation of some alcohols were studied various electrodes, bare KUG electrode, polyvinylferrocene modified KUG electrode, polyvinylferrocene modified Pt incorporated KUG electrodes, using cyclic voltammetry. The effects of various parameters such as the modification of electrode substrate, Pt loading, thickness of the polymer film, concentration of alcohols, concentration of the electrolyte, potential sweep and temperature were investigated. The optimum conditions were determined for electrooxidation of alcohols in alkaline media. The results indicated that the Pt incorporated PVF coating on the KUG electrode can significantly improve the electrochemical performance for oxidation of alcohols.Additionally, the morphological analysis of the prepared catalytic electrodes was carried out by using SEM. Also from SEM results, we observed that the KUG electrode was coated with PVF and Pt particles were incorporated in PVF matrix.
Benzer Tezler
- Gıda güvenliği açısından önem taşıyan bazı maddelerin elektrokimyasal tayinleri
Electrochemical determination of some substances important for food safety
ÖZGE KOYUN
- Development of graphene/bismuth nanocomposite film modified graphite electrode for voltammetric determination of heavy metals
Ağır metallerin voltametrik analizi için grafen/bizmut nanokompozit film modifiyeli grafit elektrot geliştirilmesi
HATİCE DİLARA KILIÇ
Yüksek Lisans
İngilizce
2018
Kimyaİstanbul Teknik ÜniversitesiNanobilim ve Nanomühendislik Ana Bilim Dalı
DOÇ. DR. HÜSEYİN KIZIL
- Biyolojik öneme sahip bazı moleküllerin vücut sıvılarından tayinine yönelik modifiye elektrot temelli sensör geliştirilmesi
Development of modified electrode based sensors for the determination of some biologically important molecules in body fluids
SALİH İLKBAŞ
- Grafen oksit modifiye elektrotların geliştirilmesi ve voltametrik miRNA tayinine yönelik uygulamaları
The development of graphene oxide modified electrodes and its application to voltametric detection of miRNA
DENİZ IŞIN
Yüksek Lisans
Türkçe
2017
Mühendislik BilimleriEge ÜniversitesiMalzeme Bilimi ve Mühendisliği Ana Bilim Dalı
PROF. DR. KADRİYE ARZUM ERDEM GÜRSAN
- Klopiralit ve propam tayinine yönelik modifiye elektrot temelli elektrokimyasal sensör geliştirilmesi
Development of electrochemical sensor based on modified electrode for the determination of clopyralid and propham
MUSTAFA GÜRBÜZ