Driver design for asynchronous motors: Digital signal processing, control and data acquisition
Asenkron motorlar için sürücü tasarımı: Sayısal sinyal işleme, kontrol ve veri edinme
- Tez No: 318099
- Danışmanlar: DOÇ. DR. KLAUS WERNER SCHMİDT
- Tez Türü: Yüksek Lisans
- Konular: Elektrik ve Elektronik Mühendisliği, Electrical and Electronics Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2012
- Dil: İngilizce
- Üniversite: Çankaya Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Elektronik ve Haberleşme Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 83
Özet
Bu çalışmada öğrenciler ve eğitimciler için üç faz AC indüksiyon motor sürücüsü eğitim seti tasarlanmıştır. AC indüksiyon motor sürücüsü eğitim seti iki ana kısımdan oluşur. Bu kısımlar güç elektroniği ve sistem kontrolü kısımlarıdır. Güç elektroniği kısımı doğrultma ve sürücü olmak üzere iki alt kısımdan oluşur. Doğrultma alt kısmı, sürücü için gereken DC gerilimi oluşturur. Bu DC gerilimi oluşturmak için kontrollü ve kontrolsüz doğrultucular tasarlanmıştır. Sürücü alt kısmı AC indüksiyon motorunu sürmek için üç faz AC gerilim oluşturur. Bu çalışmanın ana katkılarından biri olan güç elektroniği kısmında eğitim amaçlı tüm sinyaller ölçülüp, analiz edilebilir. Sistem kontrol kısmı F28035 sayısal sinyal işlemcisi kullanır. Motor açık döngü hız kontrolü için uzay vektör modulasyon methodu ile birlikte V/F kontrolü uygulanmıştır. Yine bu çalışma kapsamında, kapalı devre hız kontrolü MATLAB yardımıyla bulunan sistem modeline göre gerçekleştirilmiştir. Son olarak, maksimum torku kontrol etmek için yeni bir yöntem gerçekleştirilmiştir. Bu çalışmada veri toplama sistemi olarak D-LAB ürünü kullanılmıştır.
Özet (Çeviri)
In this research, a three-phase AC induction motor driver training set is designed for students and educators. The AC induction motor driver training set design consists of two main parts: the power electronic part and the system control part. The main components of the power electronic part are the rectifier and the inverter. The rectifier generates a DC voltage supply for feeding the inverter. In the thesis, it is realized both as a controlled and an uncontrolled rectifier. The inverter generates a three-phase AC voltage in order to drive the AC induction motor. As one main contribution of the thesis, the power electronic part is realized such that all relevant signals can be measured and analyzed for educational purposes. The system control part uses the F28035 DSP for computations. V/F control is implemented with the space vector modulation method for open-loop speed control. In addition, closed-loop speed control is performed based on a system plant model, that is found with the help of MATLAB. Finally, a new method for controlling the maximum available torque is realized. The study is supported by various measurement experiments that are obtained using the data acquisition system D-LAB.
Benzer Tezler
- Bir motor kontrol sisteminin model tabanlı donanım ve yazılım ortak tasarımı
Model-based hardware and software mutual design of a motor control system
SEDAT İN
Yüksek Lisans
Türkçe
2023
Elektrik ve Elektronik Mühendisliğiİstanbul Teknik ÜniversitesiElektronik ve Haberleşme Mühendisliği Ana Bilim Dalı
PROF. DR. SIDDIKA BERNA ÖRS YALÇIN
DOÇ. DR. HASAN TİRYAKİ
- DSP tabanlı bir sistem ile anahtarlamalı relüktans motorunun kontrolu
DSP based control of switched reluctance motor
İZEL ÇİPRUT
Yüksek Lisans
Türkçe
1994
Elektrik ve Elektronik Mühendisliğiİstanbul Teknik ÜniversitesiPROF.DR. R. NEJAT TUNCAY
- Endüstriyel üç fazlı asenkron motorlar için adaptif sinirsel-bulanık çıkarım algoritması esaslı kontrol sistemi tasarımı
Design of adaptive neural-fuzzy inference algorithm based control system for industrial three-phase asynchronous motors
SAMİ ŞİT
Doktora
Türkçe
2019
Elektrik ve Elektronik MühendisliğiKahramanmaraş Sütçü İmam ÜniversitesiElektrik-Elektronik Mühendisliği Ana Bilim Dalı
PROF. DR. MUSTAFA ŞEKKELİ
PROF. DR. HASAN RIZA ÖZÇALIK
- Asenkron makinanın hız kontrolü için PID kontrolör tasarımı
The design of pid controller for an induction machine speed control
OKAN TEKMAN
Yüksek Lisans
Türkçe
1997
Bilgisayar Mühendisliği Bilimleri-Bilgisayar ve Kontrolİstanbul Teknik ÜniversitesiKontrol ve Bilgisayar Mühendisliği Ana Bilim Dalı
DOÇ. DR. SALMAN KURTULAN
- Vektör kontrollü yöntemi ile denetime yönelik bir asenkron makina modeli
An Induction machine model for vector control methods
CEM TOLGA DURAK
Yüksek Lisans
Türkçe
1995
Bilgisayar Mühendisliği Bilimleri-Bilgisayar ve Kontrolİstanbul Teknik ÜniversitesiPROF.DR. ATİLLA BİR