An environmental strategy for medium scaled synthetic leather manufacturing facility
Orta ölçekli suni deri üretim tesisi için çevresel strateji
- Tez No: 330982
- Danışmanlar: PROF. DR. AYŞEN ERDİNÇLER
- Tez Türü: Yüksek Lisans
- Konular: Çevre Mühendisliği, Environmental Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2013
- Dil: İngilizce
- Üniversite: Boğaziçi Üniversitesi
- Enstitü: Çevre Bilimleri Enstitüsü
- Ana Bilim Dalı: Çevre Teknolojileri Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 110
Özet
Son yıllarda giderek artan çevresel kaygılar nedeniyle sanayide çevre dostu üretim, en önemli gerekliliklerden biri haline gelmiştir. Üretim tesislerinin çoğunda, çevre teknolojileri uygulamalarının yetersiz olduğu bir gerçektir. Bu nedenle bu çalışmada, orta ölçekli bir suni deri tesisi için, su tüketimi, atık üretimi, enerji tüketimi ve emisyon azaltımı açısından çevresel bir strateji belirlenmiş, stratejinin uygulama öncesi ve sonrası çevre üzerine etkileri değerlendirilmiştir. Çalışma sonuçlarına bakıldığında önerilen strateji ve çevre teknolojilerinin uygulanması ile su deri fabrikasının çevresel etkilerinin minimize edilebileceği gösterilmiştir. Tesiste, boya hazırlama ünitesi ilave su tüketimini ve iç ortam hava kirliliğini önlemek amacıyla kapalı bir alan içerisine alınarak proses hattından ayrılmıştır. Enerji denetimleri doğrultusunda su kayıp noktaları belirlenmiş ve tesisteki musluklar su israfını engellemek içi fotosel musluklar ile değiştirilmiştir. Su tüketim sistemlerindeki bu iyileştirmeler tüm su tüketimi oranlarında % 38,5?lik bir azalma ile sonuçlanmıştır. Enerji tüketimini en aza indirebilmek için, enerji denetimleri tesis tarafından başlatılmış ve bu denetimlerle enerji tüketim ve kayıp noktaları belirlenmiştir. Tesis çatısına pencereler açılarak gün ışığından faydalanma yoluna gidilmiş, olağan floresan lambalar LED lambalarla değiştirilmiştir. Tüm bu çalışmalar doğrultusunda tesisin yıllık enerji tüketiminde % 30?luk bir azalma sağlamıştır. Suni deri tesisi için öncelikli olarak bir atık yönetim planı hazırlanmış ve bu atık yönetim planı doğrultusunda atıkların türüne gore ayrı toplanması ve yetkili firmalar tarafından bertaraf edilmesi sağlanmıştır. Çalışanlara atık yönetim planı kapsamında eğitimler verilerek katılımları sağlanmıştır. Tesiste oluşan atık miktarlarının azaltılmasının yanı sıra atıkların doğru şekilde bertaraf edilmesi de sağlanmıştır. Suni deri tesisi bacalarında emisyon değerleri sınır değerleri aşmamakla birlikte tesiste koku ve iç ortam havasında solvent miktarı yüksek seviyede bulunmaktaydı. Tesiste emisyon sistemine bağlı bulunan ıslak arıtıcı çamur oluşumuna sebep oluyordu ve bu çamur evsel atık ile karıştırılıyordu. Tüm bunların önüne geçmek amacıyla arıtma sisteminde yer alan ıslak arıtma yerine, yakma sistemi yapılması, proses bacalarının yakma sistemine bağlanması, emisyon kaynağı gibi işlev gören kapı ve pencerelerin yerine iç ortam havalandırma sisteminin kurulması ve bu emisyonların da kontrol altına alınması önerilmiştir. Tüm bu iyileştirmeler sonucunda suni deri tesisi koku azalma verimi % 78 olarak, yakma sistemi bypass hattı ve yakma sistemi çıkış bacası karşılaştırıldığında yaklaşık %98 bir arıtma verimi elde edilmiştir. Böylece tesis emisyon ve imisyonları kontrol altına alınmıştır.
Özet (Çeviri)
Environmental friendly production through industries has become one of the most favorable necessities in recent years due to gradually increasing environmental concerns. It is a fact that the old manufacturing facilities, which are the initial step of environmental pollution, are lack of environmental technologies. By taking this into consideration, in this study, the effects of a medium scale synthetic leather facility on the environment were evaluated before and after the application of the proposed strategy to show the improvements in water consumption, waste generation, energy consumption, and the emissions. The results of the study showed that the implementations of the proposed strategy minimized the effects of the focused synthetic leather facility on the environment. In the facility, the dye preparation unit was separated from the process line to prevent of extra water consumption and indoor pollution. In line with energy audits the water leakage points were determined and the facility?s conventional taps were replaced with the photocell basin taps to reduce the water consumption for the domestic usage. All of these improvements in the water consumption systems led to a 38,5 % reduction of in the water consumption rates. In order to minimize energy consumption, energy audits were started by the facility. The audits determined energy consumption and energy loss points and captured a picture of the operations which caused waste in energy. The major energy consuming equipment and their energy efficiencies were identified. Lightning systems were supported by multiple glazing windows and mercury containing fluorescent lighting replaced with energy saving LED lighting, or high-pressure sodium or ceramic metal bulb lighting. All of these energy audits and the improvements enabled a reduction from 812.574kwh/year to 569.963kwh/year and led to a 30% reduction in the energy consumption rates. The synthetic leather facility had no waste management plan and all types of wastes were collected together. In order to separate collection of the hazardous wastes and non-hazardous wastes, waste management plan and a separate collection were put into practice at the facility. Through the waste management policy; the waste was collected based on its type. The reuse of waste in production cycles as secondary raw material was started. Waste was disposed of by licensed companies, and waste management training for employees were also given in the synthetic leather facility. Both the generation of the waste itself as well as effects of the disposed waste on the environment were minimised. While the synthetic leather facility?s emission measurement results did not exceed the limit values, the odour level was high throughout the facility. The VOC emissions were creating this pervasive odour. Furthermore, indoor air emissions were at the harmful level according to occupational health and safety. The synthetic leather facility did not have a ventilation system or effective emission collection system. The door and window systems were the only source of ventilation. The facility?s emissions were not under control. For controlling the system emissions and reducing the low ? value VOCs; waste gas collection and combustion systems, and the new ventilation systems were installed. Since these improvements, the synthetic leather facility does not have any reduction in the waste gas, but indeed, it started to prevent high level of indoor air pollution. Another result is that the facility has had huge odour reduction efficiency approximately 78%. When the by-pass stack flue gas and combustion system analysis results are compared, there is an emission reduction efficiency of around 98%. After the all emission systems? improvements, waste gas emissions and their effect on environment have been brought under control.
Benzer Tezler
- Yağış-havza-biyotutma sisteminin hidrolojik-su kalitesi modellemesi ve deneysel olarak incelenmesi
Experimental investigation and hydrologic-water quality modeling of rainfall-watershed-bioretention system
SEZAR GÜLBAZ
Doktora
Türkçe
2015
İnşaat Mühendisliğiİstanbul Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
PROF. DR. CEVZA MELEK KAZEZYILMAZ ALHAN
- Evaluation of different processes for the treatment of high strength toxic synthetic wastewater
Yüksek kirliliğe sahip toksik sentetik atık suların arıtımında farklı proseslerin değerlendirilmesi
ULUSOY BALİ
Doktora
İngilizce
2002
Çevre MühendisliğiDokuz Eylül ÜniversitesiÇevre Mühendisliği Ana Bilim Dalı
PROF. DR. FÜSUN ŞENGÜL
- Fate and effects of engineered nanoparticles in theenvironment and new approaches for their risk assessment
Çevredeki nanopartiküllerin akibet ve etki değerlendirmesi ve risk değerlendirmesi için yeni yaklaşımlar
EMEL TOPUZ
Doktora
İngilizce
2015
Çevre MühendisliğiVrije Universiteit AmsterdamÇevre Bilimleri Ana Bilim Dalı
PROF. DR. NİCO VAN STRAALEN
- Fate and effects of engineered nanoparticles in the environment and new approaches for their risk assessment
Nanopartiküllerin çevredeki davranış ve etkileri ile risk değerlendirmesi için yeni yaklaşımlar
EMEL TOPUZ
Doktora
İngilizce
2015
Çevre Mühendisliğiİstanbul Teknik ÜniversitesiÇevre Mühendisliği Ana Bilim Dalı
PROF. DR. İLHAN TALINLI
PROF. DR. NICO VAN STRAALEN
- High energy density cathode active materials for lithium-ion batteries
Başlık çevirisi yok
MEHMET NURULLAH ATEŞ