İçme suyu dağıtım sistemi modellemesinde tasarım optimizasyonu
Design optimisation of potable water distribution system modelling
- Tez No: 390415
- Danışmanlar: PROF. DR. GÜLFEM BAKAN
- Tez Türü: Doktora
- Konular: Çevre Mühendisliği, Environmental Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2015
- Dil: Türkçe
- Üniversite: Ondokuz Mayıs Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Çevre Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 161
Özet
Gerçek bir içmesuyu dağıtım sistemi içinde oluşabilecek durumların sistem inşaatının başlatılmasından önce tam anlamıyla kestirilememesi projelendirilen sistem hizmete sunulduğunda dönüşü olmayan hatalara yol açmaktadır. Bu nedenle su sistemi tasarımcılarına, işletmenlerine ve yöneticilerine yardımcı olmak için zamanla su dağıtım sistemi modellemesi aracı geliştirilmiştir. Su dağıtım sistemleri için hidrolik modellemenin ana hedefi dağıtım sistemi performansını yeteri derecede benzeştiren bir model geliştirmek ve korumaktır. Tez çalışması kapsamında, Samsun ili 19 Mayıs ilçesi içmesuyu dağıtım sisteminin yeterliliği, modelleme yazılımı kullanılarak hidrolik açıdan irdelenmiştir. İlk aşamada mevcut sistemle ilgili bilgi toplanmış ve Coğrafi Bilgi Sistemi (CBS) kullanılarak içmesuyu dağıtım sistemi veritabanı oluşturulmuştur. Çalışmanın ikinci aşamasında, gerçek sistemin şebeke bileşenleri MIKE URBAN WD su dağıtım sistemi yazılımı aracılığıyla coğrafi bilgi sistemi veritabanından modele aktarılmış, su tüketim girdisi ve topoğrafik girdiler tanımlanmıştır. Üçüncü aşamada model sonuçları saha gözlemleriyle karşılaştırılmış ve model giriş parametreleri kalibre edilmiştir. İlçedeki içmesuyu dağıtım sistemi davranışının izlenmesine yönelik SCADA veya Telemetri sistemi olmadığından gerçek sisteme ait bilgi edinme işlemi yangın hidrantı debi testleri ile mümkün olmuştur. Gerçek sistem üzerinde toplamda 5 adet deney gerçekleştirilmiştir. Çalışmanın dördüncü aşamasında kalibre edilmiş 19 Mayıs ilçesinin içmesuyu dağıtım sistemi modelinin; maksimum günlük su tüketimi, maksimum saatlik su tüketimi ve maksimum günlük su tüketiminin olduğu günde yangın debisi kullanımı senaryolarına göre kararlı hal analizleri gerçekleştirilmiştir. Analiz sonuçlarına göre mevcut sistemin yeterliliği irdelenmiş ve sistem eksikliklerinin giderilmesi amacıyla önerilerde bulunulmuştur.
Özet (Çeviri)
Before the start of the construction, not to take into account the situations that may occur in a real system causes errors of no return when designed system is presented to service. Therefore in order to help water system designers, operators and managers, modeling tool has been developed by the time. The fundamental goal of hydraulic modeling for water distribution systems is to develop and maintain a model that sufficiently simulates the performance of the distribution system. In this thesis, Samsun 19 Mayıs district, the adequacy of drinking water distribution system was examined in terms of using hydraulic modeling software. In the first stage, information about the existing system was gathered and database of the drinking water distribution system was created using Geographic Information System (GIS). In the second phase of the study, the network components of the real system is transferred from Geographic Information System database to the model through MIKE URBAN WD water distribution system software, the water demand inputs and topographic inputs have been identified. In the third stage model results were compared with field observations and model input parameters were calibrated. Because there hasn't been SCADA or telemetry system in the district for monitoring the behavior of the drinking water distribution system, processing information about real system has been made possible with the fire hydrant flow tests. In a total of 5 experiments were carried out on real systems. In the fourth stage of the study, steady state analysis of calibrated model of the 19 Mayıs district drinking water distribution system were peformed according to maximum daily water consumption, maximum hourly water consumption and maximum daily water consumption with fire flow scenarios. The adequacy of the existing system was examined according to analysis results and suggestions were offered in order to eliminate system deficiencies.
Benzer Tezler
- Integration of SCADA (supervisory control and data acquisition) with GIS (geographic information systems) for water quality modeling of distribution networks
Su dağıtım şebekelerinin kalite modellemesinde SCADA (yönetsel denetim ve veri elde etme)'nin CBS (coğrafi bilgi sistemleri) ile entegrasyonu
GÖKHAN BAĞCI
Yüksek Lisans
İngilizce
2001
Çevre MühendisliğiOrta Doğu Teknik ÜniversitesiÇevre Mühendisliği Ana Bilim Dalı
DOÇ. DR. NURİ MERZİ
PROF. DR. SELÇUK SOYUPAK
- Su dağıtım sistemlerinde su kalitesinin izlenmesi ve modellemesi
Monitoring and modeling of water quality in water distribution systems
MAHMUT BARAN ULUTAŞ
Yüksek Lisans
Türkçe
2016
Çevre MühendisliğiOndokuz Mayıs ÜniversitesiÇevre Mühendisliği Ana Bilim Dalı
PROF. DR. GÜLFEM BAKAN
- İçme suyu şebekelerinde oluşan su kayıp ve kaçaklarının SCADA sistemi yardımıyla incelenmesi: Muş ili örneği
Investigation of water losses and leaks in drinking water networks using SCADA system: The case of Muş province
ALPASLAN GÜÇLÜ
Yüksek Lisans
Türkçe
2024
İnşaat MühendisliğiBitlis Eren Üniversitesiİnşaat Ana Bilim Dalı
PROF. DR. MEHMET CİHAN AYDIN
- Su kayıpları ve önleme yöntemlerinin araştırılması: Kahramanmaraş ili örneği
Investigation of water losses and loss prevention methods: The case of Kahramanmaraş province
ENES ARABACI
Yüksek Lisans
Türkçe
2022
Mühendislik BilimleriKonya Teknik ÜniversitesiÇevre Mühendisliği Ana Bilim Dalı
PROF. DR. ŞÜKRÜ DURSUN
- Kentsel içme suyu dağıtım sistemi tasarımında ağ ve dal şebekelerin kıyaslanması
Comparison of tree and grid networks in the design of urban drinking water distribution system
ZAKRULLAH SALEM
Yüksek Lisans
Türkçe
2021
Mühendislik BilimleriManisa Celal Bayar Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
PROF. DR. MEHMET ALİ YURDUSEV