Planar and linear feature-based registration of terrestrial laser scans with minimum overlap using photogrammetric data
Başlık çevirisi mevcut değil.
- Tez No: 401498
- Danışmanlar: DR. AYMAN HABİB
- Tez Türü: Yüksek Lisans
- Konular: Coğrafya, Mühendislik Bilimleri, Geography, Engineering Sciences
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2012
- Dil: İngilizce
- Üniversite: University of Calgary
- Enstitü: Yurtdışı Enstitü
- Ana Bilim Dalı: Belirtilmemiş.
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 141
Özet
Özet yok.
Özet (Çeviri)
Three-dimensional (3D) modeling is crucial for studying, analyzing, reconstructing, and documenting our environment, in general, and man-made structures, in particular. 3D data for a surveyed structure can be directly collected by a Terrestrial Laser Scanner (TLS). However, several TLS scans are necessary to obtain a complete coverage of the surveyed structures. Transformation of the collected scans into a common coordinate system with a registration procedure is necessary in order to acquire a meaningful 3D model of the structure in question. The registration process requires a large overlap area among the TLS scans for reliable results. In this research, this large overlap area requirement between the TLS scans is reduced using a photogrammetric model as additional information for the registration process. Planar and linear features, which can be easily identified in photogrammetric data and TLS scans, were chosen as the registration primitives. Quantitative quality analysis is proposed in this research by calculating the point-to-plane normal distances between the registered surfaces. The experimental results from real datasets show the ability of the proposed technique, where less than 10 cm point-to-plane normal distances between the registered surfaces were observed, which confirmed the reliability of the registration results.
Benzer Tezler
- Sayısal jeoloji haritaları ve ilgili veri tabanının oluşturulmasına bir örnek. Batı Karadeniz Bölgesi
Başlık çevirisi yok
UFUK TARI
Yüksek Lisans
Türkçe
1998
Jeoloji Mühendisliğiİstanbul Teknik ÜniversitesiJeoloji Mühendisliği Ana Bilim Dalı
DOÇ. DR. OKAN TÜYSÜZ
- A Feature based stereo correspondence system
Özniteliğe dayalı bir stereo eleştirme sistemi
GÜRHAN ÖZDEMİR
Yüksek Lisans
İngilizce
1996
Elektrik ve Elektronik MühendisliğiOrta Doğu Teknik ÜniversitesiElektrik-Elektronik Mühendisliği Ana Bilim Dalı
DOÇ. DR. UĞUR HALICI
- Planar electromagnetic levitation system control
Düzlemsel elektromanyetik kaldırma sistemi kontrolü
MUNDHER HATEM ABBOOD YASEEN
Doktora
İngilizce
2018
Elektrik ve Elektronik MühendisliğiGaziantep ÜniversitesiElektrik-Elektronik Mühendisliği Ana Bilim Dalı
PROF. DR. ERGUN ERÇELEBİ
- Lineer fresnel kollektör tasarımında kavisli reflektör kullanımının Şanlıurfa meteorolojik koşullarında sistem performansına etkisi
The effect of curved reflector use in linear fresnel collector design on system performance in Sanliurfa meteorological conditions
HAKKI KESKİN
Yüksek Lisans
Türkçe
2022
EnerjiHarran ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. MEHMET AZMİ AKTACİR
- Alümina fiber takviyeli Al-si metal matriksli kompozitlerin üretimi ve mikroyapı-özellik ilişkilerinin incelenmesi
production of alumina fiber reinforced Al-si metal matrix composites and the investigation of their microstructure-propetry relation ships
HATEM AKBULUT