Development of a three dimensional dynamic load distribution program
Başlık çevirisi mevcut değil.
- Tez No: 403115
- Danışmanlar: PROF. DONALD R. HOUSER
- Tez Türü: Yüksek Lisans
- Konular: Makine Mühendisliği, Mechanical Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2003
- Dil: İngilizce
- Üniversite: The Ohio State University
- Enstitü: Yurtdışı Enstitü
- Ana Bilim Dalı: Belirtilmemiş.
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 134
Özet
Özet yok.
Özet (Çeviri)
Gearbox manufacturers put some of their effort to reduce noise and vibration radiated from gearboxes. Previous research has shown that noise radiated can be related to many parameters, but transmission error and dynamic bearing forces are considered to be the exciters of the system and the source of noise. In the OSU GearLab a number of finite element and lumped models have been created ranging from nonlinear time variant (NTV) to linear time invariant (LTI). In three dimensions, finite element models require intense computational effort if contact mechanics are considered. The objective of this thesis is to solve numerically the nonlinear differential equations of motion of a geared shaft system in time domain, and combine this solution with the contact solver of LDP in three dimensions. In the case of optimized gear sets, this analysis is expected to become important, and may lead to self-excited vibrations. The friction force, runout and backside contact are included in the thesis and consequently in the computer program. The results of this numerical analysis are compared with Calyx and DYTEM, time domain solvers, which reportedly agree with experiments
Benzer Tezler
- Alt eksteremite rehabilitasyonu odaklı robot tasarımı ve prototip üretimi
Design and prototype production of a robot focused on lower extremity rehabi̇li̇tation
İSMAİL İLHAN KÜLAHLI
Yüksek Lisans
Türkçe
2024
Makine MühendisliğiMarmara ÜniversitesiMaden Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ BİLÇEN MUTLU MİTİL
PROF. DR. GÖNÜL ACAR
- Sonlu eleman deplasman metodu ve sürücü kabini tavan çökme dayanımının incelenmesi
Finite element displacement method and examination of the endurance of the driver cabs roof crush
KOREL ATILAN
- Katmanlı kompozit panellerin anlık basınç yüküne dinamik cevabı
Dynamic response of laminated composite panels subjected to blast loading
HALİT S. TÜRKMEN
Doktora
Türkçe
1997
Uçak Mühendisliğiİstanbul Teknik ÜniversitesiUçak Mühendisliği Ana Bilim Dalı
PROF. DR. ZAHİT MECİTOĞLU
- Farklı yükleme koşullarında geleneksel ve geliştirilmiş modüler kolon-kiriş birleşimlerinin sonlu elemanlar yöntemiyle incelenmesi
Finite element analysis of traditional and advanced modular beam-to-column connections under various loading conditions
SİBEL HAZİNEDAR
Yüksek Lisans
Türkçe
2024
İnşaat MühendisliğiSakarya Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
DOÇ. DR. ELİF AĞCAKOCA
DR. MOHAMMAD MANZOOR NASERY
- Gemi yapı elemanlarının boyutlandırılması için gerilme analizi
Stress analysis for the determination of scantlings of ship structures
ERTEKİN BAYRAKTARKATAL