Silisyum grafen esaslı hibrit nano kompozit anot elektrotlarının sentezi ve li-iyon pil uygulamaları
Production of silicon-graphene based hybrid nano composite anode electrodes and li-ion battery applications
- Tez No: 462969
- Danışmanlar: YRD. DOÇ. DR. MEHMET OĞUZ GÜLER
- Tez Türü: Yüksek Lisans
- Konular: Enerji, Energy
- Anahtar Kelimeler: Li-İyon Pil, Nano, Silisyum, Grafen, Yolk-shell Yüksek enerji yoğunluğu ve uzun çevrim ömürlerine sahip olmaları nedeniyle, lityum iyon bataryalar (LIB) mobil cihazlar
- Yıl: 2017
- Dil: Türkçe
- Üniversite: Sakarya Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Metalurji ve Malzeme Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 95
Özet
Özet yok.
Özet (Çeviri)
Due to the high energy density and long cycling life, lithium ion batteries (LIBs) have been utilized as promising power sources for mobile devices, electric vehicles, and energy storage systems. Anode materials plays an important role in determining the overall performance of LIBs. In face of the increasing demand for next generation lithium ion batteries, Si has attracted much attention owing to its ultra high theoretical capacity (4.200 mAh/g, lithiated to Li4.4Si). At the same time, Si is world's second most abundant element and harmless to the environment. Nonetheless, there are still some disadvantages for the practical applications of Si as anode materials, including low intrinsic electric conductivity and large volume change (about %300) during the lithiation/delithiation process, which result in fast capacity fading and poor rate capability. Moreover, this large volume expansion will destroy the solid electrolyte interphase (SEI) protective layer on the surface of Si, which will result in a low Coulombic efficiency. Consequently, aggregation results in pulsing Si nanoparticles and loss of contact with the existing collector, resulting in poor electrochemical performance. In order to solve these problems carbon mainly serves as a protecting matrix for the volume change of Si particle. In this master thesis study, commercial silicon were coated with tetraethyl orthosilicate (TEOS) and carbon to produce yolk Shell nanoparticles and Si-C/Graphene hybrid composite free electrodes. The chemical and physical properties of the as-produced electrodes were analyzed with several testing methods. The electrochemical properties of the as-produced electrode materials were evaluated by assembling those electrodes in a CR2016 coin cell. The electrochemical tests were shown that the electrochemical performance of freestanding Si/C/Graphene and Yolk Shell Si-C/Graphene hybrid electrodes are far beyond the commercial graphite.
Benzer Tezler
- Çok bileşenli hibrit nanomimarili silisyum/grafen/karbon nanofiber negatif elektrotların geliştirilmesi
Development of multi-component hybrid nanoarchitectured silicon/graphene/carbon nanofiber negative electrodes
MAHMUD TOKUR
Doktora
Türkçe
2019
EnerjiSakarya ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
PROF. DR. HATEM AKBULUT
- Grafen/kalay esaslı nanokompozitlerin lityum iyon pillerde anot malzemesi olarak kullanımının incelenmesi
Investigation of the use of graphene/tin based nanocomposides as anode material in lithium ion batteries
SELİN ALP
Yüksek Lisans
Türkçe
2022
Enerjiİstanbul Teknik ÜniversitesiKimya Mühendisliği Ana Bilim Dalı
PROF. DR. REHA YAVUZ
- Lityum iyon piller için üç boyutlu grafen/karbon nanotüp/silisyum nanokompozit anotların geliştirilmesi
Development of three-dimensional graphene/carbon nanotube/silicon nanocomposite anodes for lithium-ion batteries
SELİN DEMİRCİ
Doktora
Türkçe
2024
Enerjiİstanbul Teknik ÜniversitesiEnerji Bilim ve Teknoloji Ana Bilim Dalı
PROF. DR. NİLGÜN YAVUZ
- İndüksiyonla sıcak işlemin grafen/Si3N4 takviyeli Al2024 esaslı kompozitlerin mekanik özelliklerine ve mikroyapısına olan etkisinin araştırılması
Investigation of the effect of hot treatment by induction on the mechanical properties and microstructure of graphene/Si3N4 reinforced Al2024 based composites
ÜMMET MAHMUTOĞLU
Yüksek Lisans
Türkçe
2021
Makine MühendisliğiOndokuz Mayıs ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ MAHMUT CAN ŞENEL
- Bakır esaslı kompozit elektrik motor fırçası üretimi ve özelliklerinin incelenmesi
Production of copper based electrical motor brushes and investigation of properites
HÜSEYİN İPEK
Doktora
Türkçe
2017
Endüstri ve Endüstri MühendisliğiKaradeniz Teknik ÜniversitesiMetalurji ve Makine Mühendisliği Ana Bilim Dalı
DOÇ. DR. HAMDULLAH ÇUVALCI