Numerical investigation of the effect of process parameters to optimize a superplastic forming process
Süperplastik şekillendirme yönteminin optimize edilmesi için proses parametrelerinin etkisinin numerik olarak incelenmesi
- Tez No: 479891
- Danışmanlar: PROF. DR. AHMET ERMAN TEKKAYA, YRD. DOÇ. DR. MEHMET İPEKOĞLU
- Tez Türü: Yüksek Lisans
- Konular: Makine Mühendisliği, Mechanical Engineering
- Anahtar Kelimeler: Superplastic Forming, Superplasticity, Finite Element Method, Machine Learning, Data Mining, Aviation, Aerospace
- Yıl: 2017
- Dil: İngilizce
- Üniversite: Türk-Alman Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Makine ve İmalat Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
Özet yok.
Özet (Çeviri)
Superplastic forming (SPF) is an alternative manufacturing method to produce complex shapes in one step without assembling operations which are not possible with other methods. SPF process enables to get near net shape products without surface finish operation necessities. SPF process can produce parts with nearly 1000% elongations with good mechanical properties. SPF process also reduces the weights of the products because it eliminates assembly processes. Furthermore, SPF process increases cycles of components before failure. Mentioned assets of SPF make it a very important process choice in aviation industry, in which good mechanical properties, low weights and long service lives are required. The main purpose of this thesis is to investigate process parameters of SPF process for Ti6Al4V material using finite element method (FEM) in order to obtain an optimum process which results in both good product quality and reasonable cost. For this purpose, first analysis results were compared to an experimental study to test accuracy of the used method, next the process parameters were investigated for rectangular and conical parts. Then, a tool was developed to be used in the factory for estimating process time of SPF process with given process parameters. Finally, application of SPF process is conducted for an aircraft blowout door in order to choose an optimum process for production.
Benzer Tezler
- Derin çekmede iş malzemesi ve proses parametrelerinin deneysel ve nümerik olarak incelenmesi
Experimental and numerical investigation of sheet material and process parameters in deep drawing
CANER YALÇIN
Yüksek Lisans
Türkçe
2021
Mühendislik BilimleriKocaeli ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. TAMER SINMAZÇELİK
- Kriging interpolasyonu kullanan vekil modeller ile gemi kıç formunun viskoz direnç yönünden optimizasyonu
Aft form optimization of ships for minimum viscous resistance by using kriging metamodeling technique
HAYRİYE PEHLİVAN SOLAK
Doktora
Türkçe
2020
Gemi Mühendisliğiİstanbul Teknik ÜniversitesiGemi İnşaatı ve Gemi Makineleri Mühendisliği Ana Bilim Dalı
PROF. DR. ÖMER GÖREN
- Frezeyle tornalama operasyonunun geometrik, kuvvet ve ısıl modellenmesi
Geometric, force and thermal modeling of turn-milling operations
UMUT KARAGÜZEL
Doktora
Türkçe
2016
Makine Mühendisliğiİstanbul Teknik ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
DOÇ. DR. MUSTAFA BAKKAL
PROF. DR. ERHAN BUDAK
- Hesaplamalı akışkanlar dinamiği ile cam şekillendirilmesinin modellenmesi
Modelling glass forming using computational fluid dynamics
RAMAZAN ERGİN SAĞLAM
Yüksek Lisans
Türkçe
2025
Mühendislik Bilimleriİstanbul Teknik ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. KADİR KIRKKÖPRÜ
- Soğutucularda kullanılan tek silindirli pistonlu kompresörlerin dinamik ve akustik analizi
Başlık çevirisi yok
HALUK EROL