Geri Dön

Polivinil alkol katkılı lifli betonların özellikleri ve kullanılabilirliğinin araştırılması

Başlık çevirisi mevcut değil.

  1. Tez No: 50906
  2. Yazar: YÜKSEL ESEN
  3. Danışmanlar: Y.DOÇ.DR. M. ŞÜKRÜ YILDIRIM
  4. Tez Türü: Yüksek Lisans
  5. Konular: İnşaat Mühendisliği, Civil Engineering
  6. Anahtar Kelimeler: Lifli beton, akrilik lifler, polMnil alkol, poliakrilonitril, çekme gerilmesi, eğilme gerilmesi (mukavemeti), çarpma direnci, lifli takviye, Beton, Polivinil alkol, Çimento, Fibre concrete, acrylic fibres, polyvinyl alcohol (PVAL), polyacrylonitrile, tensile strength, flexural strength, impact resistance, fibre reinforcement, Concrete, Polyvinyl alcohol, Cement
  7. Yıl: 1996
  8. Dil: Türkçe
  9. Üniversite: Fırat Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Belirtilmemiş.
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: Belirtilmemiş.

Özet

ÖZET Yüksek Lisans Tezi POLİVİNİL ALKOL KATKILI LİFÜ BETONLARIN ÖZELLİKLERİ VE KULLANİLABİRLİ?İNİN ARAŞTIRILMASI Yüksel ESEN Fırat Üniversitesi Fen Bilimleri Enstitüsü İnşaat Mühendisliği Anabilim Dalı 1996, Sayfa:79 Bu çalışmada, çimento hamuru bileşiklerinin mekaniksel özelliklerinde, Poliakrilonitril liflerinin etkisi araştırılmaktadır. Poliakrilonitıil lifinin çimeno hamuru matrisine ilavesi, bileşiğin; eğilme, çekmeye çarpma özelliklerinde önemli bir düzelme meydana getirir, örneğin Portland Çimentosu hamurunda, bu öp lifin varlığı çarpma direncini 40-500 defaya kadar düzelttiği ayrıca lifin %4 ilavesi ile eğilme direncinin, saf hamura göre aynı şartlarda %386 civarında bir artmaya neden olduğu gözlendi. Tek ekenli çekme gerilmesi deneyleri Eksenel Çekme Tekniği kullanılarak yapıldı. Çfrnento matrisine Poliakrilonitril liflerinin % 1,2,3 ve 4 ilavesi, eksenel çekme gerilmesinde sırasıyla %21, 46, 85, ve 103'likbir artma meydana getirir. Bileşiğin epme mukavemetindeki artma, tek eksenli çekme mukavemet" ile karşılaştırıldığı zaman daha önemlidir. Çimento matrisinin eğilme gerilmesi, liflerin % 1,2,3 ve 4 ilavesiyle sırasına göre %157, 243, 334 ve 386 kadar arttı. Eğilmedeki güvenirliliğin lif ilavesi ile arttığı ve bileşiğin güvenirliliği ile % lif ilavesi arasında bir ilişki olmadığı görüldü. Bununla beraber, Poliakrilonitril lifleri ile güçlendirilmiş bileşiğin; eğilme, çekme ve çarpma özellikleri önemli bir şekilde düzeldi.

Özet (Çeviri)

u SUMMARY Masters Thesis Properties of Polyvinyl Alcohol - Fiber Reinforced Concretes and Research of Theirs Availability Yüksel ESEN Fırat University Graduate School Natural and Applied Science <t *j Department of Civil Engineering t<, 3 1996, Page: 79 ^c£r- in this study, the effect of Polyacrylonitrile filers on the mechanical properties of cement paste composites was studied. The addition of Polyacrylonitrile fiber to the cementitious paste matrix results in a significant improvement in the tensile, flexural and impact properties of the composites. For instance, in pastes of Portland cement, tt has been provided that the presence of this type of fibre improves their impact resistance up to around 40 - 500 times whereas flexural resistances for a 4% wt. of addition of long fibres have an increase, with respect to those obtained for pure paste, of around 386% in same cases. The uniaxial tensile strength results are obtained using the uniaxial tensile technique.The addition of 1, 2, 3 and 4% wt. of Polyacrylonitrile fiber to a cement matrix results in an increase in the uniaxial tensile strength of 21, 46, 85 and 103% respectively. The enhancement of the composite flexural strength was more significant, as compared to the uniaxial tensile strength. The flexural strength of cement matrix increased by 157, 243, 334 and 386% with the addition of 1, 2, 3 and 4% wt. of this fiber, respectively. it was seen that, reliability in flexural increased by fiber addition and there was no correlation between the percent fiber loading and the reliability of the composites. However, the Polyacrylonrtrile - fiber - reinforced composite in tension, flexural and impact properties was greatly improved.

Benzer Tezler

  1. Behavior of two-way concrete slabs reinforced with fibers

    Elyaf katkılı betonarme iki yönlü döşemelerin davranışı

    ISRAA SABBAR ABBAS

    Yüksek Lisans

    İngilizce

    İngilizce

    2017

    İnşaat MühendisliğiGaziantep Üniversitesi

    İnşaat Mühendisliği Ana Bilim Dalı

    PROF. DR. MUSTAFA ÖZAKÇA

  2. Bazalt lifli çimento esaslı kompozitlerin yapısal olarak kullanılabilirliğinin incelenmesi

    Investigation of structurally usability of cement based composites with basalt fiber

    ŞÜKRÜ ÖZKAN

    Doktora

    Türkçe

    Türkçe

    2017

    İnşaat MühendisliğiSüleyman Demirel Üniversitesi

    İnşaat Mühendisliği Ana Bilim Dalı

    PROF. DR. FUAT DEMİR

  3. Monitoring food freshness using a multilayercolorimetric sensor film

    Çok katmanlı kolorimetrik sensör film kullanarak gıda tazeliğini izleme

    CANSU OKTAY

    Yüksek Lisans

    İngilizce

    İngilizce

    2023

    Gıda MühendisliğiOrta Doğu Teknik Üniversitesi

    Gıda Mühendisliği Ana Bilim Dalı

    DR. ÖĞR. ÜYESİ LEYLA NESRİN KAHYAOĞLU

    DOÇ. DR. MEHRAN MORADİ

  4. Glioblastoma tedavisinde kombin ilaç yüklü katmanlı nanolif yüzeylerin tasarımı ve kullanılabilirliğinin analizi

    Design and analysis of usability of combined drug loaded layered nanofiber surfaces in glioblastoma treatment

    MELİS ERÇELİK

    Doktora

    Türkçe

    Türkçe

    2024

    GenetikBursa Uludağ Üniversitesi

    Tıbbi Biyoloji Ana Bilim Dalı

    PROF. DR. BERRİN TUNCA

  5. Kalsit ocağı filtre atıklarının tek bileşenli ve lifli geopolimerlerin performans özelliklerine etkisi

    Effect of calcite quarry filter wastes on the performance properties of one part and fiber-reinforced geopolymers

    ZEHRA GÜRBÜZ

    Yüksek Lisans

    Türkçe

    Türkçe

    2025

    İnşaat MühendisliğiAtatürk Üniversitesi

    İnşaat Mühendisliği Ana Bilim Dalı

    DOÇ. DR. GÖKHAN KAPLAN