High strength steel for seismic resistance of beam-to-column connections: Novel metal investigation
Başlık çevirisi mevcut değil.
- Tez No: 516658
- Danışmanlar: Prof. AMR S. ELNASHAI
- Tez Türü: Yüksek Lisans
- Konular: İnşaat Mühendisliği, Civil Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2011
- Dil: İngilizce
- Üniversite: University of Illinois at Urbana-Champaign
- Enstitü: Yurtdışı Enstitü
- Ana Bilim Dalı: Belirtilmemiş.
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 157
Özet
Özet yok.
Özet (Çeviri)
The use of high strength steels (HSS) has been gradually increasing since 1930s. However, research and knowledge about HSS lagged, preventing its widespread applicability in seismic resistance structures. Due to the lack of sufficient theoretical and experimental studies regarding ductility, defor- mation of structures, and rotational capacity of connections made by HSS, current codes recommend that connections remain in the elastic range. Under seismic events, high demands for local and global deformation are imposed on structural elements, connections and details. Designers should look into strain and deformation of the steel and ensure that the material meets the required criteria given in the design code. Since HSS needs further inves- tigation, using steels greater than S460 is prohibited in the current design codes. In order to develop a more practical HSS, research within the last few decades has focused on the problem of creating steels with greater strength, good weldability and reasonable ductility. This thesis focuses on semi-rigid —partial strength— connections with components made from new bainitic steel, an alloy possessing greater ductility, strength and weldability due to its particular microstructure formation at a temperature range of 250-550oC. Connections between members are the regions where the material is exposed to higher deformation demands. Thus, use of bainitic steel in extended end- plates is of great benefit due to its higher strength and ductility. The behav- ior of extended end-plate connections is evaluated using component based mechanical model. Yield line method is used to measure the geometry of the end-plates. Furthermore, comparisons of bainitic steel with conventional high strength and normal steels are presented. In this thesis S960 and A36 are chosen as conventional HSS and normal steel, respectively. It is shown that HSS in semi-rigid connections which are designed to yield at the joints instead of the beam ends results in more economical column sections, end- plate cross-sections, and bolt sizes. Utilizing HSS in semi-rigid connections also reduces the weight of the structure and hence its inertial load. Moreover, the results of this research show that using bainitic and S960 HSS eliminates the necessity of continuity plates and web stiffeners in connections. Hence, significant savings in construction period and labor cost can be achieved.
Benzer Tezler
- Süneklik düzeyi yüksek bina türü bir endüstri yapısına ait kiriş-kolon birleşim bölgesinin tasarımı ve doğrusal olmayan analizi
Design and nonlinear analyses of the beam-to-column (eaves) connections for high ductile portal frames
YAĞMUR KULAK
Yüksek Lisans
Türkçe
2021
İnşaat Mühendisliğiİstanbul Teknik Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
DOÇ. DR. CÜNEYT VATANSEVER
- Farklı yükleme koşullarında geleneksel ve geliştirilmiş modüler kolon-kiriş birleşimlerinin sonlu elemanlar yöntemiyle incelenmesi
Finite element analysis of traditional and advanced modular beam-to-column connections under various loading conditions
SİBEL HAZİNEDAR
Yüksek Lisans
Türkçe
2024
İnşaat MühendisliğiSakarya Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
DOÇ. DR. ELİF AĞCAKOCA
DR. MOHAMMAD MANZOOR NASERY
- Kiriş ucu plastik mafsal bölgesindeki tam dayanımlı bulonlu kiriş ekinin kiriş-kolon birleşim davranışına etkisinin araştırılması
An investigation of the effect of fully restrained bolted splice connection within the plastic hinge zone at a beam end on the behavior of beam-to-column connection
KUTAY KUTSAL
Yüksek Lisans
Türkçe
2017
İnşaat Mühendisliğiİstanbul Teknik Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. CÜNEYT VATANSEVER
- Prefabrike yapılarda birleşim bölgelerinin düzenlenmesi ve tasarımı
Designing and arrangement of the prefabricated structure's connection parts
MEHMET GÖKALP GEDİK
Yüksek Lisans
Türkçe
2014
İnşaat Mühendisliğiİstanbul Teknik Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
PROF. DR. TURGUT ÖZTÜRK
- Çok katlı çelik çerçeve türü bir taşıyıcı sisteminde eski ve güncel yönetmelik uygulamalarının karşılaştırılması
Comparison of a multi storey steel structure system according to the old and the new building code applications
FATİH IRGAÇ
Yüksek Lisans
Türkçe
2019
Mühendislik Bilimleriİstanbul Teknik Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ MECİT ÇELİK