IoT ile bulanık mantık temelli kestirimci bakım çözümüne yönelik sistem tasarımı ve uygulaması
Fuzzy logic based system desiign and implementation intended for predective maintance with IoT
- Tez No: 534700
- Danışmanlar: DR. ÖĞR. ÜYESİ RÜŞTÜ AKAY
- Tez Türü: Yüksek Lisans
- Konular: Mekatronik Mühendisliği, Mechatronics Engineering
- Anahtar Kelimeler: IoT, PLC, Modbus, Bulanık Mantık, Kestirimci Bakım, IoT, PLC, Modbus, Fuzzy Logic, Predictive Maintaince
- Yıl: 2019
- Dil: Türkçe
- Üniversite: Erciyes Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Mekatronik Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 101
Özet
Gelişen teknolojiyle beraber etrafımızdaki çok sayıda fiziksel nesnenin internet üzerinden bir araya getirilebilmesi hayatımızı önemli ölçüde değiştirmektedir. Bu nesnelerden elde edilecek verilerin son derece değerli olduğu düşünüldüğünde bunların etkin bir şekilde kullanılmasına olan ilgi her geçen gün artmaktadır. Bu çalışma kapsamında cihazlardan sıcaklık, voltaj, akım ve frekans gibi bazı verilerin anlık olarak toplanabilmesi ve değerlendirilebilmesi amacı ile prototip bir uygulama gerçekleştirilmiştir. Elde edilen verilerin bulanık mantık temelli kestirimci bakım çözümleri için kullanılabileceği gösterilmiştir. Yapılan bu çalışma ile bakım faaliyetlerinde azalma, personel çalışma saatlerinde tasarruf, ekipmanların ömürlerinde ve verimliliğinde artış sağlayarak genel sistem bakım maliyetlerinin ucuzlatılabileceği gösterilmiştir. Ayrıca susam havuzu karıştırıcısı sistemi üzerinde gerçekleştirilen örnek uygulamada PLC yerine modbus protokolüne sahip akıllı cihazlarla gerçekleştirilen yeni bir tasarım önerilmiştir. Bu tasarımda PLC, röleler, analog modüller ve fazla kablolar sistemden çıkartılmış, sistem panosu sadeleştirilmiştir. Önerilen sistemde veriler bir modem aracılığıyla internet ortamına açılmış, farklı bilgisayar sistemleri ile uzaktan izlenebilir ve kontrol edilebilir hala getirilmiştir. Sonuçlar değerlendirildiğinde modbuslı yapı ile sistem sadeleştirilmiş maliyet ucuzlatılmış ve enerji tüketimi azaltılmıştır. Bu yeni yaklaşımın farklı fiziksel nesnelerden veri toplanması ve yorumlanması için uygulanabilir olduğu gözlemlenmiştir.
Özet (Çeviri)
Many physical objects around us can be brought together on the internet changes our lives considerably with the developing technology. Considering that the data to be obtained from these objects is extremely valuable, the interest in using them effectively increases day by day. Within the scope of this study, a prototype application was carried out to collect and evaluate some data such as temperature, voltage, current and frequency. It has been shown that the data obtained can be used for fuzzy logic based predictive maintenance solutions. With this study, it has been shown that the maintenance of the maintenance activities, the savings in the working hours of the personnel, the increase in the life and efficiency of the equipment, and the general system maintenance costs can be reduced. In addition, a new design with smart devices with modbus protocol was proposed instead of PLC in the sample application performed on the sesame pool mixer system. In this design, PLC, relays, analog modules and excess cables are removed from the system and the system board is simplified. In the proposed system, the data can be opened with a modem and can be monitored and controlled remotely via different computer systems. When the results are evaluated, system simplified cost with modbus structure is reduced and energy consumption is reduced. It has been observed that this new approach is applicable to collecting and interpreting data from different physical objects.
Benzer Tezler
- Siber fiziksel ve endüstriyel sistemlerde davetsiz misafir saldırılarının anormallik tespiti için yapay zeka ve yumuşak hesaplama yöntemlerinin uygulanması
Application of artificial intelligence and soft computing methods for anomaly detection of intrusion attacks in cyber-physical and industrial systems
SİNAN ATICI
Yüksek Lisans
Türkçe
2025
Bilgisayar Mühendisliği Bilimleri-Bilgisayar ve KontrolTrakya ÜniversitesiMekatronik Mühendisliği Ana Bilim Dalı
PROF. DR. GÜRKAN TUNA
- Mikroşebekelerde ada mod çalışmanın tespiti ve güç kalitesi olaylarının sınıflandırılması için yapay zekâ tabanlı kontrol yöntemlerinin geliştirilmesi
Development of artificial intelligence based control methods for detection of islanding conditions and classification of power quality events in microgrids
ALPER YILMAZ
Doktora
Türkçe
2023
Elektrik ve Elektronik MühendisliğiBursa Teknik ÜniversitesiElektrik-Elektronik Mühendisliği Ana Bilim Dalı
DOÇ. DR. GÖKAY BAYRAK
- Fotovoltaik sistemlerde tozlanmaya bağlı enerji kayıplarının incelenmesi için IOT tabanlı bir ölçüm sisteminin geliştirilmesi
Development of an IOT-based measurement system for investi̇gating energy losses due to dust in photovoltaic systems
OĞUZHAN COŞKUN
Yüksek Lisans
Türkçe
2025
EnerjiBursa Teknik ÜniversitesiEnerji Sistemleri Mühendisliği Ana Bilim Dalı
DOÇ. DR. GÖKAY BAYRAK
- An it investments assessment framework in textile production from a digital sustainability perspective
Dijital sürdürülebilirlik perspektifinden tekstil üretiminde bir BT yatırım değerlendirme çerçevesi
ELİF CAN EDGE KURTUL
Yüksek Lisans
İngilizce
2025
Endüstri ve Endüstri MühendisliğiGalatasaray ÜniversitesiAkıllı Sistemler Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ MURAT LEVENT DEMİRCAN
- Enhancing warehouse efficiency through geographic information system and genetic algorithm
Coğrafi bilgi sistemleri ve genetik algoritma ile depo verimliliğinin artırılması
ONUR YÜREKLİ
Yüksek Lisans
İngilizce
2024
Mühendislik Bilimleriİstanbul Teknik ÜniversitesiGeomatik Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ MUHAMMED ENES ATİK