Geri Dön

Çinko oksit-grafen oksit nanokompozit ince filmlerin üretimi ve optiksel özelliklerinin araştırılması

Fabrication of zinc oxide-graphane oxide nanocomposite thin films and investigation of their optical properties

  1. Tez No: 540888
  2. Yazar: AYŞE YILMAZ
  3. Danışmanlar: PROF. DR. ERTAN EVİN
  4. Tez Türü: Yüksek Lisans
  5. Konular: Metalurji Mühendisliği, Metallurgical Engineering
  6. Anahtar Kelimeler: Grafen oksit, ZnO, İnce film, Graphene oxide, ZnO, thin film
  7. Yıl: 2018
  8. Dil: Türkçe
  9. Üniversite: Fırat Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Metalurji ve Malzeme Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 103

Özet

Bu tez çalışmasında, saf ZnO ve GO katkılı ZnO ince filmler sol-jel metodu ile hazırlandı. Grafen oksit hummers metodu ile sentezlendi. Çözeltinin hazırlanmasında başlangıç malzemesi olarak çinko asetat dehidrat kullanıldı. Çözeltiler sol-jel yöntemiyle hazırlandı. çözeltilere farklı oranlarda GO katkılandırılarak GO katkılı ZnO çözeltileri oluşturuldu. Hazırlanan çözeltiler döndürme kaplama metodu kullanılarak cam altlıklar üzerine kaplandı. 5 kat kaplama yapılarak hazırlanan ince filmler 450 oC 1 saat kurutulduktan sonra ince filmlerin optik özellikleri UV-VIS spektrofometresi ile analiz edildi. Yapısal özellikleri, x-ışınları kırınım tekniği (XRD) ile yüzey morfolojisi, atomik kuvvet mikroskobu AFM yardımı ile incelendi. XRD sonuçlarıyla katkısız ve GO katkılı ZnO filmlerin kristal yapısı analiz edildi. AFM sonuçları ile filmlerin yüzey pürüzlülüğü ve çinko oksitin fiber çapı hesaplandı. Optik analiz yardımıyla filmlerin yasak enerji aralıkları hesaplandı. Elde edilen sonuçlar GO katkılı ZnO ince filmlerin katkılama miktarına bağlı olarak kristal ve yüzey analizlerinde değişiklikler gözlemlendiğini ayrıca ince filmlerin optik özelliklerinin geliştirilebileceğini gösterdi.

Özet (Çeviri)

Fabrication Of Zinc Oxide-Graphane Oxide Nanocomposite Thin Films And Investigation Of Their Optical Properties In this thesis study, ZnO thin films undoped and GO doped were prepared by sol-gel method, Graphene oxide was synthesized by hummers method. Zinc acetate dehydrate was used as the precursor material for the preparation of the solution.The solutions were prepared by sol-gel method.GO doped ZnO solutions were formed by adding different ratios of GO to the solutions.The prepared solutions were coated on glass substrate using the spin coating method.Thin films prepared by 5 coat coating After drying at 450 oC for 1 hour, the optical properties of thin films were analyzed by UV-VIS spectrophotometry. Structural properties were investigated by the x-ray diffraction technique (XRD) and surface morphology with atomic force microscopy (AFM). The crystal structure was analyzed undoped and of GO doped ZnO thin films upon XRD results. Surface roughness of the films and fiber diameter of zinc oxide were calculated by AFM results. Bandgap energy ranges of films were calculated by optical analysis. The results showed that changes in crystal and surface analyzes were observed depending on the amount of ZnO thin films with GO additive and the optical properties of thin films could be improved.

Benzer Tezler

  1. Metal oksitler ile modifiye edilmiş karbon türevlerinden nanokompozit yapıların sentezi ve karakterizasyonu

    Synthesis and characterization of nanocomposite structures from metal oxi̇des modified carbon derivatives

    GÖKÇEN SALMAN AKDENİZ

    Yüksek Lisans

    Türkçe

    Türkçe

    2020

    Bilim ve Teknolojiİzmir Katip Çelebi Üniversitesi

    Nanobilim ve Nanoteknoloji Ana Bilim Dalı

    DR. ÖĞR. ÜYESİ AHMET AYKAÇ

  2. Yeşil sentez yöntemi ile grafen temelli ZnO nanokompozitlerin sentezi, karakterizasyonu, U(VI) ve Th(IV) iyonlarının giderimi için etkinliğinin araştırılması

    Synthesis, characterization of graphene-based ZnO nanocomposites by the green synthesis method and investigation of the efficiency of the removal of U(VI) and Th(IV) ions

    İKBAL GÖZDE KAPTANOĞLU

    Doktora

    Türkçe

    Türkçe

    2023

    Metalurji MühendisliğiEge Üniversitesi

    Malzeme Bilimi ve Mühendisliği Ana Bilim Dalı

    PROF. DR. SABRİYE YUŞAN

    DOÇ. DR. ÜMİT HÜSEYİN KAYNAR

  3. ERGO/ZnO nanokompozit elektrotların CdS, CdTe, Bi2S3, CdS/CdTe ve CdS/Bi2S3 kuantum parçacıklar ile dekore edilmesi, karakterizasyonu ve QDSSC'Lerde uygulamaları

    Decoration of ERGO/ZnO nanocomposite electrodes with CdS, CdTe, Bi2S3, CdS/CdTe and CdS/Bi2S3 quantum dots, characterization and applications in QDSSCs

    MESUT ERYİĞİT

    Doktora

    Türkçe

    Türkçe

    2022

    EnerjiAtatürk Üniversitesi

    Fizik Ana Bilim Dalı

    PROF. DR. ÜMİT DEMİR

  4. Yüksek sıcaklık uygulamaları için şekil hafızalı nanokompozit malzemelerin üretimi ve karakterizasyonu

    Production and characterization of graphene nanocomposite shapememory material

    NİHAN ÜNLÜ

    Doktora

    Türkçe

    Türkçe

    2021

    Fizik ve Fizik MühendisliğiFırat Üniversitesi

    Fizik Ana Bilim Dalı

    DOÇ. DR. CANAN AKSU CANBAY

  5. Nanopartikül içerikli kompozit membran hazırlama ve uygulama alanları

    Nanoparticle containing composite membrane preparation and application areas

    İLKER AKIN

    Doktora

    Türkçe

    Türkçe

    2015

    KimyaSelçuk Üniversitesi

    Kimya Ana Bilim Dalı

    PROF. DR. MUSTAFA ERSÖZ