Prediction of driving torque and direct withdrawal capacity of screws in particleboard
Başlık çevirisi mevcut değil.
- Tez No: 565735
- Danışmanlar: Prof. Dr. JILEI ZHANG
- Tez Türü: Doktora
- Konular: Makine Mühendisliği, Mechanical Engineering
- Anahtar Kelimeler: screw driving, seating and stripping torques, screw withdrawal, particleboard
- Yıl: 2015
- Dil: İngilizce
- Üniversite: Mississippi State University
- Enstitü: Yurtdışı Enstitü
- Ana Bilim Dalı: Belirtilmemiş.
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 150
Özet
Özet yok.
Özet (Çeviri)
This study investigated effects of pilot-hole diameter, screw penetration depth, embedded screw orientation, magnitude of pushing-down force and turning speed on screw driving torques in particleboard (PB) and predicted screw driving torques for two PB clamped together. In addition, effects of material mechanical properties such as shear and tensile strength on screw direct withdrawal loads in PB were investigated and a model to predict screw direct withdrawal load capacity was developed. Furthermore, effects of screw driving torques on clamping pressure between two particleboards were investigated. It was concluded in general that stripping torques (STT) per thread for driving screws into tested PB materials had significantly higher means than seating torque (SET) per thread. The SET and STT per thread for screws driven into PB materials with 0.75-inch penetration depth was higher than 0.50-inch depth when no pilot-hole or pilot-holes with diameter of 1/8 in were drilled. . Statistical analyses on screw driving torques for two PB materials clamped together, illustrated that the SET and STT tended to increase when the pilot-hole diameter decreased from 11/64 to 1/16 in. The prediction of the SET and STT values of driving screws through a face into an edge of PB materials can be predicted by the connection of two separate PB materials between a single face specimen with countersink in the surface and a single edge specimen. In addition, a face into a face PB connection, the prediction of both SET and STT can be predicted by connection of two separate face specimens. Results on shear and internal bond (IB) strength demonstrated that there was a clear trend that the shear and IB strengths were higher in the surface of the particleboards than the other levels. In the case of screw direct withdrawal (SDW), the results illustrated that the SDW values of particleboard types did not differ from each other when the pilot-hole diameters of 1/8 and 9/64 in used to drive the screw into the material.
Benzer Tezler
- Evaluation of model-based predictive control methods in high-speed automated ground vehicle path following
Yüksek hızlı bir otonom kara taşıtının yörünge takibinde model bazlı öngörülü kontrol yöntemlerinin değerlendirilmesi
VOLKAN BEKİR YANGIN
Doktora
İngilizce
2024
Makine Mühendisliğiİstanbul Teknik ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. ÖZGEN AKALIN
- İki ayaklı yürüyen robot tasarımı ve prototip imalatı
Design and contruction of 12 dof biped robot
ALPER GERÇEK
Yüksek Lisans
Türkçe
2012
Makine Mühendisliğiİstanbul Teknik ÜniversitesiMakine Ana Bilim Dalı
PROF. DR. HİKMET KOCABAŞ
YRD. DOÇ. DR. ZEKİ YAĞIZ BAYRAKTAROĞLU
- Predictive control of hybrid electric vehicle with adaptive prediction of torque
Hibrid elektrik aracının adaptif tork tahmini yaparak MPC kontrolör tasarımı
NASSER FAZLI
Yüksek Lisans
İngilizce
2019
Elektrik ve Elektronik Mühendisliğiİstanbul Teknik ÜniversitesiKontrol ve Otomasyon Mühendisliği Ana Bilim Dalı
DOÇ. DR. YAPRAK YALÇIN
- Design and implementation of a torque-based predictive steering assistance for human-centered and safe automated driving
İnsan-merkezli ve güvenli otomatik sürüş için tork tabanlı öngörümlü direksiyon yardımcı sisteminin tasarımı ve gerçeklenmesi
ZİYA ERCAN
Doktora
İngilizce
2017
Bilgisayar Mühendisliği Bilimleri-Bilgisayar ve Kontrolİstanbul Teknik ÜniversitesiKontrol ve Otomasyon Mühendisliği Ana Bilim Dalı
PROF. DR. METİN GÖKAŞAN
- Dizel motor silindir devre dışı bırakma teknolojisinin farklı sürüş çevrimleri boyunca araç yakıt tüketimine etkisinin incelenmesi
Investigation the effect of diesel engine cylinder deactivation technology on vehicle fuel consumption through different driving cycles
ADEM ÖZDEMİR
Yüksek Lisans
Türkçe
2024
Makine Mühendisliğiİstanbul Teknik ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ BARIŞ DOĞRU