Grafitten sıvı faz eksfolasyon yöntemi ile nano boyutlu tabaka üretimi
Production of nano sized sheets with liquid exfoliation from graphite
- Tez No: 574504
- Danışmanlar: PROF. DR. MUSTAFA TAŞKIN
- Tez Türü: Yüksek Lisans
- Konular: Metalurji Mühendisliği, Metallurgical Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2019
- Dil: Türkçe
- Üniversite: Mersin Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Metalurji ve Malzeme Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 85
Özet
Grafenin bulunması, iki boyutlu malzemelerin çağının başlamasına öncülük etmiştir. Mekaniksel ve elektriksel özellikleri sayesinde birçok yeni teknolojinin de hayatımıza girmesini sağlayacak olan bu malzememeler üzerine yaplan araştırmalar, grafenin bulunmasıyla birlikte çok hızlı bir şekilde artmıştır. Ancak grafenin ve diğer iki boyutlu malzemelerin ticaretleşmesinde ve araştırmalarının yavaş ilerlemesindeki en büyük sorun, bu malzemelerin üretimlerinin maliyetli olması ve çok az miktarlarda üretilebiliyor olmasıdır. Sıvı faz ekfolasyonu, yüklü miktarda grafen üretimi için umut vadeden yöntemlerden biridir. Bu çalışmada yüklü miktarda grafen üretimi için sıvı faz eksfolasyonu araştırılmıştır. Bu amaçla öncelikle sıvı faz ekfolasyonu prosesi için sonikasyon gücü ve süresinin eksfolasyon üzerine etkisi incelemek amacıyla bu proseste yoğun olarak kullanılan DMF ile öncü çalışmalar yapılmıştır. Akabinde bu parametrelerde farklı solventler kullanılarak, solventlerin eksfolasyon üzerine etkileri gözlemlenmiştir. Yapılan üretimler sonucu üretilen nano tabakalar sedimantasyon gözlemine tabi tutulmuştur. Bu şekilde ekfolasyon verimi ile alakalı ön bir izlenim kazanılmıştır. Sonrasında en başarılı numuneler Geçirimli Elektron Mikroskobu (TEM), Raman Spektroskopisi, X-ışını Fotoelekron Spektroskopi (XPS), Fourier Dönüşümlü Kızılötesi Spektroskopisi (FT-IR) ile incelenmiştir. Bu sayede sonikayon sırasındaki süre ve güç miktarlarındaki değişim ile farklı solventlerin ekfolasyon üzerine etkileri gözlemlenmiştir. Üretilen grafen nano tabakaların üretim yönteminden kaynaklı defektin veya solventten kaynaklı kirliliklerin olup olmadığı incelenmiştir.
Özet (Çeviri)
The discovery of graphene pioneered the era of two-dimensional materials. Due to the mechanical and electrical properties of many new technologies that will allow us to enter our lives, research on these materials has increased rapidly with the presence of graphene. However, the biggest problem in the commercialization of graphene and other two-dimensional materials and the slow progress of their research is that these materials are costly and can be produced in very small quantities. Liquid phase exfoliation is one of the promising methods for producing large amounts of graphene. In this study, liquid phase exfoliation was investigated for the production of large amounts of graphene. For this purpose, firstly, to investigate the effect of sonication power and duration on exfoliation for liquid phase exfoliation process, pioneering studies have been done with DMF which is used extensively in this process. Subsequently, the effects of these solvents on exfoliation were observed by using different solvents in these parameters. The nano sheets produced as a result of the productions were subjected to sedimentation observation. This gives a preliminary impression of the exfoliation efficiency. Then, the most successful samples were examined by Transmission Electron Microscopy (TEM), Raman Spectroscopy, X-ray Photoelectron Spectroscopy (XPS), Fourier Transform Infrared Spectroscopy (FT-IR). Thus, the effects of different solvents on exfoliation were observed with changes in the amount of time and power during sonication. It has been investigated whether there is a defect or solvent contamination due to the production method of graphene nano sheets produced.
Benzer Tezler
- Sürfaktan destekli sıvı faz eksfoliasyon yöntemi ile grafen üretimi
Graphene production by surfact supported liquid phase exfoliation method
ALİ SÖNMEZ
Yüksek Lisans
Türkçe
2019
Metalurji MühendisliğiMersin ÜniversitesiNanoteknoloji ve İleri Malzemeler Ana Bilim Dalı
DOÇ. DR. ÖMER GÜLER
- The effect of production parameters on the properties of continuous graphene oxide fibers
Üretim parametrelerinin sürekli grafen lif özellikleri üzerine etkisi
MERVİN ÖLMEZ
Yüksek Lisans
İngilizce
2018
Polimer Bilim ve Teknolojisiİstanbul Teknik ÜniversitesiPolimer Bilim ve Teknolojisi Ana Bilim Dalı
PROF. DR. HACER AYŞEN ÖNEN
- Bor nitrür nanotabaka sentezi ve karakterizasyonu
Synthesis and characterization of boron nitride nanosheets
HASAN SAFA
Yüksek Lisans
Türkçe
2019
Metalurji MühendisliğiMersin ÜniversitesiNanoteknoloji ve İleri Malzemeler Ana Bilim Dalı
DR. ÖĞR. ÜYESİ SEVAL HALE GÜLER
- Demir çelik sektöründe kullanılan mgo-c pota tuğlalarının proses hazırlık evresinde mekanik ve korozyon dayanım davranışlarının incelenmesi
Investigation of mechanical and corrosion resistance in the process preparation phase of mgo-c pota bricks used in iron and steel sector
BİLAL UTKU KARATAŞ
Yüksek Lisans
Türkçe
2019
Metalurji MühendisliğiEskişehir Teknik ÜniversitesiMalzeme Bilimi ve Mühendisliği Ana Bilim Dalı
PROF. DR. SEMRA KURAMA
- Bronz balataların üretimi ve performans testleri
Production of bronze linings and performance tests
BAYRAM ALBAYRAK
Yüksek Lisans
Türkçe
2009
Teknik EğitimSakarya ÜniversitesiMetal Eğitimi Ana Bilim Dalı
DOÇ. DR. ADEM DEMİR