Giyim konforu ve koruyucu özellikleri iyileştirilmiş yenilikçi itfaiyeci giysisi tasarımı
An innovative design of the firefighter clothing for improving comfort and physical properties
- Tez No: 582264
- Danışmanlar: PROF. DR. MUSTAFA ERDEM ÜREYEN
- Tez Türü: Yüksek Lisans
- Konular: Bilim ve Teknoloji, Giyim Endüstrisi, Science and Technology, Clothing Industry
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2019
- Dil: Türkçe
- Üniversite: Eskişehir Teknik Üniversitesi
- Enstitü: Lisansüstü Eğitim Enstitüsü
- Ana Bilim Dalı: Endüstriyel Sanatlar Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 206
Özet
İtfaiyeci giysilerinin termal koruyucu performansı birincil öneme sahiptir. Giysi performansı tasarımdan, boyuttan, aksesuardan ve bir giysinin nasıl giyildiğinden etkilenmektedir. Kullanıcı rahatlığı, giysi performansı için değerlendirme kriterlerini belirlemektedir. ISO 13688 Standardında önerilen boyutlar tüm kullanıcılar için uygun değildir. Bu çalışmada itfaiyeci giysilerinin uyum problemleri tespit edilmeye çalışılmış ve bu problemleri giderebilecek yeni tasarımlar ortaya koyulmuştur. Bu amaçla, iki farklı itfaiyede çalışan ve farklı beden özelliklerine sahip 20 erkek itfaiyeci ile çalışılmıştır. İtfaiyecilerin tüm vücut bölgeleri mezür ile elle ölçülmüştür. Her kişi için bir ölçüm tablosu hazırlanmıştır. Giysinin itfaiyecilere uygunluğu CLO | 3D Yazılımı ile değerlendirilmiştir. Yazılımda tüm itfaiyecilerin üç boyutlu (3D) avatarları oluşturulmuştur. Daha sonra, tüm itfaiyeci giysilerinin kalıp ölçüleri yazılıma aktarılmıştır. Hazırlanan kalıplar, itfaiyecinin giysi bedenine (S-M-L-XL-XXL) göre avatarlar üzerine giydirilerek 3D giysiler simüle edilmiştir. Bu aşamada ISO 13688 standardında tanımlanan ölçüler ile gerçek giysilerin boyutları karşılaştırılmıştır. Bir itfaiyecinin hareket halinde iken alabileceği dört pozisyon seçilmiştir. Fit kontrolü sonucunda her hareket için ayrı ayrı olmak üzere bölgesel kalıp problemleri belirlenmiştir. 20 itfaiyecinin tamamında genel uyum sorunları tespit edilmiş ve giysi kalıplarının düzenlemeleriyle birlikte tespit edilen problemler ortadan kaldırılmıştır. Elde edilen verilerle yeni giysi tasarımları oluşturulmuştur. Yeni tasarlanan giysilerin 3D simülasyonları yapılmış ve çalışmada incelenen giysiler ile karşılaştırılmıştır. Sonuç olarak geliştirilen yeni kalıp ölçülerinin itfaiyeci giysilerinin uyum problemlerinin büyük bölümünü giderebildiği tespit edilmiştir. Bu çalışmada elde edilen sonuçlar, daha rahat itfaiyeci giysisi tasarlarken uygun kalıp ölçüleri için bir kılavuz niteliğinde olacaktır.
Özet (Çeviri)
Thermal protective performance of firefighter's clothing is of primary importance. Clothing performance is also affected by design, size, accessory, and how a garment is worn. User comfort determines the evaluation criteria for clothing performance. The sizes recommended in ISO 13688 standard are not suitable for all users. In this work, the conformity problems of the firefighter clothing were tried to be determined and new designs that could solve these problems were introduced. For this aim, 20 male firefighters working in two different fire department with different body characteristics were selected. The human body was divided into 56 different areas such as neck circumference, shoulders, arms, thighs, calf, front and back knee area. All body parts of firefighters were measured manually by tape measure. A size chart was prepared for each person. Suitability of clothing for firefighters was evaluated by CLO | 3D Fashion Design Software. Three-dimensional (3D) avatars of all firefighters were created in the software. Then, the pattern dimensions of all firefighter clothing were also transferred to the software. Prepared garments by new pattern dimensions were dressed on the avatars according to each firefighter's clothing size (S-M-L-XL-XXL) and 3D clothes were simulated. At this stage, the size chart defined in the ISO 13688 standard and the measurements of the actual garments were compared. Four positions were selected for a firefighter to take while on moving. As a result of the fit control, regional pattern problems were determined separately for each movement. Common fit problems were identified in all 20 firefighters and these problems were eliminated by the developed new pattern sizes. New garment designs were developed based on the obtained data. The 3D simulations of the newly designed clothes were made and compared with the clothes examined in the study. As a result, it has been found that the new pattern dimensions developed in this work can solve most of the adaptation problems of firefighter clothing. The results obtained in this study will serve as a guideline for appropriate pattern dimensions when designing more comfortable firefighter clothing.
Benzer Tezler
- Fonksiyonel tekstiller geliştirmek amacıyla metal oksit nanoyapıların sentezlenmesi ve kumaşlara uygulanması
Synthesis of metal oxide nanostructures and application to fabric surfaces towards development of functional textiles
MERVE KÜÇÜK
Doktora
Türkçe
2020
Mühendislik Bilimleriİstanbul Teknik ÜniversitesiMalzeme Bilimi ve Mühendisliği Ana Bilim Dalı
PROF. DR. MUSTAFA LÜTFİ ÖVEÇOĞLU
- Analyzing and modelling of comfort and protection properties of fire fighters protective clothings
İtfaiyeci koruyucu kıyafetlerinin konfor ve koruma özelliklerinin analizi ve modelleme
TOLERA ADERIE NEGAWO
Yüksek Lisans
İngilizce
2015
Tekstil ve Tekstil Mühendisliğiİstanbul Teknik ÜniversitesiTekstil Mühendisliği Ana Bilim Dalı
DOÇ. DR. SELİN HANİFE ERYÜRÜK
- Koruyucu medikal yapıların konfor ve filtrasyon performanslarının incelenmesi
Investigating comfort and filtration performances of medical protective structures
SELÇUK ASLAN
Yüksek Lisans
Türkçe
2011
Tekstil ve Tekstil MühendisliğiSüleyman Demirel ÜniversitesiTekstil Mühendisliği Ana Bilim Dalı
DOÇ. DR. CEM ÇETİN
YRD. DOÇ. DR. SİBEL KAPLAN
- Kadın posta dağıtıcıların yazlık üniformalarına ilişkin memnuniyet durumlarının incelenmesi ve bir örnek tasarım
Examining satisfaction state of women mail carriers related to their uniforms and a case desing
KADRİYE ULUDAĞ
Yüksek Lisans
Türkçe
2010
Giyim EndüstrisiGazi ÜniversitesiTekstil Mühendisliği Bölümü
YRD. DOÇ. DR. GÜLÇİN ÜSTÜN
- Multifonksiyonel üç boyutlu koruyucu giysi kumaşı tasarımı ve geliştirilmesi
Design and development of multifunctio nal three dimensional fabric for protective clothin
ÇAĞRIALP ARSLAN
Yüksek Lisans
Türkçe
2014
Tekstil ve Tekstil MühendisliğiErciyes ÜniversitesiTekstil Mühendisliği Ana Bilim Dalı
PROF. DR. LEVENT ÖNAL