PV/T panelin alüminyum kanatçık elemanları ile soğutularak enerji performansının deneysel olarak incelenmesi
Experimental investigation of the energy performance of the PV/T panel cooled with aluminum fins
- Tez No: 583411
- Danışmanlar: PROF. DR. ÖMER ÖZYURT, DR. ÖĞR. ÜYESİ GÖKHAN ÖMEROĞLU
- Tez Türü: Yüksek Lisans
- Konular: Mühendislik Bilimleri, Engineering Sciences
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2019
- Dil: Türkçe
- Üniversite: Atatürk Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Makine Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Termodinamik Bilim Dalı
- Sayfa Sayısı: 84
Özet
Bilim, sanayi ve teknoloji gibi birçok alanda gelişim sağlanan günümüzde enerji ihtiyacı da çok hızlı artmaktadır. Hızla artan enerji ihtiyacının karşılanması için fosil yakıtların sürekliliğinin olamaması, pahalı olması ve çevreye zararları nedeniyle alternatif enerji kaynaklarının geliştirilmesine neden olmuştur. Alternatif enerji kaynakları içinde en hızlı gelişim gösteren kaynak diğer enerji kaynaklarına nazaran güneş enerjisi olmuştur. Güneş enerjisinden elektrik üretimi fotovoltaik paneller ile yapılmaktadır. Fotovoltaik paneller güneşten gelen ışınların %15-20'lik bir kısmını elektriğe kalan kısmını da ısı enerjisine dönüştürmektedir. Fotovoltaik panelin ısı üretmesi, panelin ısınmasına panel sıcaklığının artması da elektrik üretimini negatif yönde etkilendiği hem literatür araştırmalarından hem de deneysel sonuçlar incelendiğinde görülmektedir. Fotovoltaik panellerin enerji performansını iyileştirilebilmek hem de üretilen ısı enerjisinden yararlanmak amacıyla bir deney düzeneği tasarlanmıştır. Burada ısı enerjisi kullanılan akışkana aktarılmıştır. Elde edilen termal enerji, uygun tasarım yapılarak birçok ısıtma ihtiyacı karşılanabilir. Deney düzeneği tasarımı ısıyı panel yüzeyinden uzaklaştırarak kullanılan akışkan sıcaklığını artırmak için 1,8 mm kalınlığında 16 mm çapında silindirik ve yarı silindirik alüminyum kanatçıklar ile iki farklı diziliş şekliyle ve Reynolds değeri yaklaşık 1500, 2000, 2500,3000 olmak üzere dört farklı hava hızında ve 600W/m2, 800 W/m2, 1000 W/m2 ışınım seviyelerinde deneysel olarak incelenmiştir. Yapılan deneylerin sonuçları incelendiğinde tam silindir kanatçıkla şaşırtmalı dizlimde ve Reynolds yaklaşık 3000 değerinde toplam verim, 600 W/m2ışınımda %32,8 oranında, 800 W/m2 ışınımda %34,5 oranında, 1000 W/m2ışınımda ise %39,1 kadar artış göstermiştir.
Özet (Çeviri)
In many areas such as science, industry and technology, the need for energy is increasing rapidly. The lack of continuity of fossil fuels in order to meet the rapidly increasing energy needs has led to the development of alternative energy sources due to its expensive and harmful effects on the environment. Among the renewable energy sources, solar energy has been the fastest developing source compared to other energy sources. Solar energy is used in different applications. Photovoltaic panels are used to generate electricity from solar energy. Photovoltaic panels the rays coming from the sun convert 15-20% to electricity and the rest to heat energy. It is seen that photovoltaic panel heat generation, panel heat up and panel heat increase negatively affect electricity production both from literature researches and experimental results. An experimental setup was designed to improve the energy performance of the photovoltaic panels and to utilize the heat energy produced. Here, the heat energy is transferred to the fluid used, many heating needs can be met by making the appropriate design. In order to increase the temperature of the fluid used to remove heat from the panel surface in the design of the test apparatus, 1,8 mm thick 16 mm diameter cylindrical and semi-cylindrical aluminum fins with two different array shapes and Reynolds at approximately 1500, 2000, 2500, 3000 at four different air speeds and 600W / m2, 800 W / m2, 1000 W / m2 radiation levels were investigated experimentally When the results of the experiments were examined, the total efficiency with a full cylinder fin and at the nearly 3000 Reynolds significantly increased by 32.8% at 600 W / m2 radiation, by 34.5% at 800 W / m2 radiation and by 39.1% at 1000 W / m2 radiation.
Benzer Tezler
- Fotovoltaik termal (PV/T) - peltier hibrit bir sistemin bal peteği ısı alıcı kullanılarak termal ve elektriksel performansının incelenmesi
Investigation of thermal and electrical performance of a photovoltaic thermal (PV/T)- peltier hybrid system using a honeycomb heat sink
ABDULSAMET ÇOBAN
- Bir fotovoltaik-termal (PV/T) güneş kollektöründe poroz materyal ve nanoakışkan kullanımının performansa etkisinin nümerik olarak incelenmesi
Numerical investigation of the effect of porous material and nanofluid including on performance in a photovoltaic-thermal (PV/T) solar collector
ATILGAN ONURCAN ÖZŞİMŞEK
Yüksek Lisans
Türkçe
2023
Makine MühendisliğiKafkas ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ MUHAMMED ARSLAN OMAR
- Farklı soğutma metotlarının fotovoltaik panellerin performansına etkilerinin teorik ve deneysel incelenmesi
Theoretical and experimental investigation of the effects of different cooling methods on the performance of photovoltaic panels
İSMAİL KARALI
Doktora
Türkçe
2023
Makine MühendisliğiIsparta Uygulamalı Bilimler ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. AHMET KABUL
- Termoelektrik destekli fotovoltaik termal sisteminde metal köpük ile soğutmanın deneysel olarak incelenmesi
Experimental investigation of cooling with metal foam in thermoelectricly supported photovoltaic thermal system
FURKAN ERCAN
Yüksek Lisans
Türkçe
2024
EnerjiAtatürk ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
DOÇ. DR. AHMET NUMAN ÖZAKIN
- Fotovoltaik termal (PV/T) sistemlerde hava ve su akışkanlarının birlikte kullanılmasının toplam verime etkisinin incelenmesi
Investigation on the effect of the total efficiency of water and air used together as a fluid in the photovoltaic thermal (PV/T) systems
İMDAT ZAFER PEKTEMİR
Doktora
Türkçe
2020
EnerjiMarmara ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. MUSTAFA ATMACA