Geri Dön

Maksimum güç noktası izleyicili fotovoltaik sistemin LabVIEW tabanlı kontrolü ve izlenmesi

LabVIEW based monitoring system for maximum power point tracking characteristics of photovoltaic modules

  1. Tez No: 634838
  2. Yazar: ABDULKADİR MÜHENDİS
  3. Danışmanlar: PROF. DR. AHMET AFŞİN KULAKSIZ
  4. Tez Türü: Yüksek Lisans
  5. Konular: Elektrik ve Elektronik Mühendisliği, Electrical and Electronics Engineering
  6. Anahtar Kelimeler: Fotovoltaik, LabVIEW, Mikrodenetleyici, MPPT, Gerçek Zamanlı Ölçüm, LabVIEW, Microcontroller, MPPT, Photovoltaic, Real Time Measurement
  7. Yıl: 2020
  8. Dil: Türkçe
  9. Üniversite: Konya Teknik Üniversitesi
  10. Enstitü: Lisansüstü Eğitim Enstitüsü
  11. Ana Bilim Dalı: Elektrik-Elektronik Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 96

Özet

Fotovoltaik, güneş ışığını doğrudan elektriğe dönüştürme işlemidir. İlk yatırım maliyeti yüksek olsa da güneş enerjisi temiz ve yenilenebilir bir enerji kaynağı sunar. Fotovoltaik sistem kullanılarak elektrik enerjisi üretmek için; sistemin bulunduğu konum, ortam sıcaklığı ve dönüşüm sisteminin verimliliği gibi parametrelerin bilinmesi sistemin optimum çalışabilmesi için önemlidir. Bu sistemler tek panel ile kullanılabildiği gibi büyük enerji santrallerinde çok sayıda panelin birbirine bağlanması ile de kullanılabilir. Bu tarz bir sistem oluşturulurken hücrelerin güneşten aldığı enerjiye göre ürettiği gerilim ve akım değerleri kritik derecede önemlidir. Bu sistemlerin maksimum verimde çalışabilmesi için, sistem performansının analiz edilebildiği bir izleme sistemi kullanmak, fotovoltaik sistem tarafından üretilen enerji miktarını gerçek zamanlı olarak takip edebilmek ve öngörülen dönüşüm verimliliğinin, maksimum güç noktasını belirlemek son derece mühimdir. Bu tezde LabVIEW programı kullanılarak fotovoltaik hücrelerin karakteristikleri, sistemin ürettiği elektrik enerjisi ve maksimum güç noktasının belirlenmesi için gerçek zamanlı ölçümlerin laboratuvar ortamında yapılması amacıyla kullanılacak bir donanım ve yazılım geliştirilmiştir. LabVIEW, endüstriyel olarak veri toplama sistemleri, test ve ölçüm cihazları gibi ihtiyaçları karşılamak için sıklıkla kullanılmaktadır. Sistemde kullanılan sensörlerden gelen bilgi, maksimum güç noktası izleme (MPPT) cihazı olarak kullanılan DC-DC dönüştürücüsünden okunmuştur. Elde edilen tüm veriler LabVIEW'ın arayüzünde, donanımda kullanılan mikrodenetleyiciye bağlı sensörlerden ve toplanan verilerin analiz edilebilmesi için LabVIEW ortamında hazırlanan görsel arayüz programı vasıtasıyla izlenmiştir. Önerilen sistem analiz ve veri toplama uygulamalarında kabul edilebilir bir performansa sahip olduğu görülmüştür.

Özet (Çeviri)

Photovoltaics is the process of converting sunlight directly into electricity. Though expensive to implement, solar energy offers a clean and renewable energy source. When contemplating to use the produced energy from the solar photovoltaic system, it is important to know how much energy can be produced according to the location, temperature and conversion efficiency. Those kind of systems can be implemented by using only one solar panel in the small systems or might be reached to thousands of panels by connecting them together in the large power plants. The delivered energy from the photovoltaic system which consists of one or more photovoltaic panels is dependent on its characteristics. The electrical characteristics (voltage, current) for those systems will be produced according to the received energy from the sun which is the most important factor to evaluate its performance. Using a monitoring system to analyze the performance of the system has the main role to be able to track the amount of energy which is produced by the photovoltaic system in real-time, and to ensure the forecasted conversion efficiency can continue tracking the maximum power point most of the time. In this thesis, the proposed monitoring system is designed and implemented to simulate photovoltaic panel characteristics based on LabVIEW environment (Laboratory Virtual Instrument Engineering Workbench) using data acquisiton circuit to get the maximum power point of the system. LabVIEW environment has supportive tools which are used to create a multitude of the application in much less time using parallel programming language platform. All data have been presented in LabVIEW's interface which is provided from the sensors connected to a microcontroller unit from the designed circuit to analyze the collected data according to the drawn curves. The results shows that the proposed system has acceptable performance for analysis and data acquisition applications.

Benzer Tezler

  1. Maksimum güç noktası izleyicili ve UVM inverterli fotovoltaik sistemin yapay sinir ağları tabanlı kontrolü

    ANN-based control of a PV system with maximum power point tracker and SVM inverter

    AHMET AFŞİN KULAKSIZ

    Doktora

    Türkçe

    Türkçe

    2007

    Elektrik ve Elektronik MühendisliğiSelçuk Üniversitesi

    Elektrik-Elektronik Mühendisliği Ana Bilim Dalı

    YRD. DOÇ. DR. RAMAZAN AKKAYA

  2. Güneş pilleriyle birlikte kullanılan bir MPP izleyicisinin tasarımı

    Design of a MPP tracker for solar cells

    YAŞAR MURAT ERTEM

    Yüksek Lisans

    Türkçe

    Türkçe

    1997

    EnerjiEge Üniversitesi

    Güneş Enerjisi Ana Bilim Dalı

    PROF. DR. METİN ÇOLAK

  3. Fotovoltaik sistemler için DSP temelli maksimum güç noktası izleyicisi tasarım ve uygulaması

    Design and implementation of DSP based maximum power point tracking for photovoltaic system

    MURAT ULUĞ

    Yüksek Lisans

    Türkçe

    Türkçe

    2014

    Elektrik ve Elektronik MühendisliğiSüleyman Demirel Üniversitesi

    Elektronik-Bilgisayar Eğitimi Ana Bilim Dalı

    DOÇ. DR. OKAN BİNGÖL

  4. Maximum power point tracking in photovoltaic panels with particle swarm optimization algorithm

    Güneş panellerinde parçacık sürü optimizasyonu ile maksimum güç takibi

    MOHAMMADREZA ESMALI NOJEHDEH

    Yüksek Lisans

    İngilizce

    İngilizce

    2015

    Elektrik ve Elektronik Mühendisliğiİstanbul Teknik Üniversitesi

    Elektrik Mühendisliği Ana Bilim Dalı

    YRD. DOÇ. DR. DENİZ YILDIRIM

  5. Design and implementation of a sepic battery charger for automotive pv applications

    Otomotiv fotovoltaik uygulamaları için sepıc batarya şarj cihazı tasarımı ve gerçekleştirilmesi

    ELİF PINAR KESİK

    Yüksek Lisans

    İngilizce

    İngilizce

    2018

    Elektrik ve Elektronik Mühendisliğiİstanbul Teknik Üniversitesi

    Elektronik ve Haberleşme Mühendisliği Ana Bilim Dalı

    PROF. DR. ECE OLCAY GÜNEŞ

    DOÇ. DR. ÖZGÜR ÜSTÜN