Suni dişlerin aşındırma sonrası yüzey pürüzlülüğüne polisaj tekniklerinin etkisi
The effect of polishing techniques on the surface roughness of artificial teeth after adjustment
- Tez No: 658644
- Danışmanlar: PROF. DR. KADRİYE FUNDA AKALTAN
- Tez Türü: Diş Hekimliği Uzmanlık
- Konular: Diş Hekimliği, Dentistry
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2020
- Dil: Türkçe
- Üniversite: Ankara Üniversitesi
- Enstitü: Diş Hekimliği Fakültesi
- Ana Bilim Dalı: Protetik Diş Tedavisi Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 85
Özet
Dental protezlerin önemli bir elemanı olan suni dişlerin yüzeylerinin pürüzsüz olması birçok açıdan büyük önem taşır. Ağızda mevcut olan doğal dişlerle ve yumuşak dokuyla doğrudan temas halinde bulunan suni dişlerin yüzeyleri uyumlandırma sonrası pürüzlü bırakıldığında plak birikimi, çürük oluşumu, dişeti enflamasyonu gibi olumsuz sonuçlara neden olabilmektedir. Bu nedenle suni dişlerin aşındırma sonrası yüzey pürüzlülüğü, çeşitli polisaj işlemleriyle giderilmelidir. Araştırmada 4 farklı suni diş materyalinin aşındırma sonrası oluşan yüzey pürüzlülüğüne 5 farklı polisaj yönteminin etkisinin değerlendirilmesi amaçlanmıştır. Çalışmada PMMA akrilik (A), çapraz çift bağlı akrilik (Ç), nanohibrit kompozit (N) ve izosit (İ) suni molar dişlerin bukkal yüzeyleri test alanı olarak belirlenmiştir. Suni diş yüzeyleri farklı grenlerdeki (-400, -600, -800, -1000) silikon karbid zımparayla ıslak ortamda aşındırılıp, üretici talimatları doğrultusunda; Sof-Lex (3M ESPE, St. Paul, MN, USA), OneGloss (Shofu Inc., Kyoto, Japan), pomza, polisaj pastası (Universal polishing paste, Ivoclar Vivodent AG, Italy) ve pomza sonrası polisaj pastası ile muamele edilmiştir. Polisaj yöntemleri Sof-Lex (Sx), OneGloss (Og), pomza (Pz), polisaj pastası (Pp) ve pomza sonrası polisaj pastası uygulaması (Pzp) olarak adlandırılmıştır. Polisaj sonrası yüzey pürüzlülük ölçümleri için profilometre kullanılmış, ortalama Ra değerleri kaydedilmiştir. Değerler 2 Yönlü Faktöryel Varyans Analizi (ANOVA) tekniği ile istatistiksel olarak değerlendirilmiştir. A ve Ç diş tipleri için parlatma yöntemleri Ra ortalamalarına göre karşılaştırıldığında, Sx grubu ile diğer tüm gruplar arasındaki fark anlamlıdır (p0,05). Pz parlatma yönteminde Ç ve İ grupları arasındaki fark anlamlıdır (p0,05), A ve İ grupları ile Ç grubu arasındaki fark anlamlıdır (p
Özet (Çeviri)
It is critical for the artificial teeth, which are important elements of dental prostheses, to have smooth surfaces. When artificial teeth surfaces that are in direct contact with teeth and intraoral soft tissues have not been polished after intraoral adjustment, possible outcomes such as plaque accumulation, caries formation and gingival inflammation can occur. For this reason, artificial tooth surfaces should be smoothened with proper polishing processes. The purpose of this in-vitro research was to determine the effect of 5 different polishing methods on the surface roughness of 4 different artificial teeth after adjustment. The buccal surfaces of PMMA acrylic (A), double-cross-linked acrylic (C), nanohybrid composite (N) and isosit (I) artificial molar teeth were determined to be the test area. Artificial teeth surfaces were abraded in wet conditions using silicon carbide papers with different grades (-400, -600, -800, -1000). Artificial teeth were polished according to the manufacturer's instructions with the following products; Sof-Lex (3M ESPE, St. Paul, MN, USA), OneGloss (Shofu Inc., Kyoto, Japan), pumice, polishing paste (Universal polishing paste, Ivoclar Vivodent AG, Italy) and polishing paste after pumice. The polishing groups were as follows: Sof-Lex (Sx), OneGloss (Og), pumice (Pz), polishing paste (Pp) and post-pumice polishing paste application (Pzp). After the application of polishing methods, the surface roughness of each specimen was measured with a profilometer and the Ra values (µm) were recorded. Data were statistically evaluated by using 2-way Factorial Analysis of Variance (ANOVA) technique. When the polishing methods for groups A and C were compared with respect to Ra, the difference between the Sx group and the other groups were stastistically significant (p0,05). For the Pz method, the difference between C and I groups was statistically significant (p0,05). The differences between the A and I groups with C group was statistically significant (p
Benzer Tezler
- Suni diş materyallerinin aşınma potansiyellerinin in-vitro değerlendirilmesi
In vitro evaluation of the wear potential of artificial denture tooth materials
SILA YELEKÇİ
Diş Hekimliği Uzmanlık
Türkçe
2019
Diş HekimliğiAnkara ÜniversitesiProtetik Diş Tedavisi Ana Bilim Dalı
PROF. DR. KADRİYE FUNDA AKALTAN
- Seramik (porselen) dişler, kullanılan kompozit yapıştırıcılar ve uygulanan test yöntemleri
Ceramic (pocelain) teeth, used compsite bonding agents and applied test methods
SENA GÜNAY
Yüksek Lisans
Türkçe
2003
Metalurji MühendisliğiYıldız Teknik ÜniversitesiMetalurji Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. IŞIL KERTİ
- Farklı alaşım içeren kök kanal aletlerinin eğri kök kanal preparasyonuna etkisinin in vitro olarak incelenmesi
Comparisons of four root canal instruments made of various alloys in shaping the curved root canal in vitro
A. AYŞİM AKMAN
Doktora
Türkçe
2001
Diş HekimliğiAnkara ÜniversitesiDiş Hastalıkları ve Tedavisi Ana Bilim Dalı
PROF.DR. BADE SONAT
- Doğal ve suni olarak oluşmuş farklı dentin yüzeylerine adezivlerin bağlanma dayanımları ve morfolojik yapıları üzerine Er:YAG lazerin etkileri
The effects of Er:YAG laser on morphological status and bond strengths of different adhesives to artificially and naturally created different dentin surfaces
MEHMET ÖZGÜR GÖNLÜM
Doktora
Türkçe
2012
Diş HekimliğiSelçuk ÜniversitesiDiş Hastalıkları ve Tedavisi Ana Bilim Dalı
PROF. DR. NİMET ÜNLÜ
- Mine yüzeyinin farklı içerikli asitler ile pürüzlendirilmesinin braket tutuculuğuna etkisinin incelenmesi
The Evaluation of the effect of enamel etching with different types of acids on bonding strength of direct bonded brackets
AYŞEGÜL KALKAN (BAŞ)