Josephson eklem sistemi ile birincil DC gerilim standardı oluşturulması
Establishment of the josephson junction array system primary voltage standard
- Tez No: 68855
- Danışmanlar: PROF. DR. HASAN DİNÇER
- Tez Türü: Yüksek Lisans
- Konular: Elektrik ve Elektronik Mühendisliği, Electrical and Electronics Engineering
- Anahtar Kelimeler: DC Gerilim, Josephson, birincil standart, kalibrasyon
- Yıl: 1997
- Dil: Türkçe
- Üniversite: Kocaeli Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Elektronik ve Haberleşme Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 91
Özet
JOSEPHSON EKLEM SİSTEMİ İLE BİRİNCİL DC GERİLİM STANDARDI OLUŞTURULMASI Beylan Akyel
Özet (Çeviri)
Bey lan Akyel Keywords : DC Voltage, Josephson. primary standard, calibration Abstract : Josephson junction array system voltage standards are used in major national metrology institutes and calibration laboratories, to establish the unit of voltage with an uncertainty of 10'', and to calibrate other DC standards like Weston cells and Zener reference standards with an uncertainty of 10' Josephson junction system is based on the so-called“AC Josephson effect”, which relates voltage with frequency through the natura! physical constants. A single junction can yield a voltage only of the order of millivolts, thus many junctions have to be connected in series to obtain greater voltages Today, Josephson svstems, that can provide voltages between -15 V and +15 V, are available. The national unit of voltage has been maintained in the Tübitak-National Metrology Institute by groups of Weston cells and Zener reference standards until now, whereas with the establishment of the Josephson standard, it is realized by the method which is worldwide accepted as being the primary system. The system established in UME utilizes the 10 V Josephson array chip produced by PTB (the National Metrology Institute of Germany). Measurements have been performed with the system both in Germany and after its establishment in LTME, where Zener reference standards belonging to PTB and UME have been calibrated and an uncertainty of the order of at least 10'8 has been achieved.
Benzer Tezler
- Investigation of the sputtering conditions of niobium and magnetite thin films for realizing ferromagnetic Josephson junctions
Ferromanyetik Josephson eklemlerinin oluşturulması için niyobyum ve magnetit ince filmlerin püskürtme koşullarının incelenmesi
TUNA ALP
Yüksek Lisans
Türkçe
2023
Fizik ve Fizik MühendisliğiSabancı ÜniversitesiFizik Ana Bilim Dalı
YRD. DOÇ. DR. YILMAZ ŞİMŞEK
- Nonlinear dynamical aspects of the dielectric waveguide surface plasmon josephson junction
Dielektrik dalga kılavuz-yüzey plazmonu Josephson ekleminin doğrusal olmayan dinamik özellikleri
YASA EKŞİOĞLU ÖZOK
Doktora
İngilizce
2011
Fizik ve Fizik MühendisliğiKoç ÜniversitesiFizik Ana Bilim Dalı
DOÇ. DR. KAAN GÜVEN
- Transition dynamics of single- and double Josephson junctions formed by spatially coupled soliton and surface plasmons
Uzamsal etkileşim içinde bulunan soliton ve yüzey plazmonlarının oluşturduğu tek ve çift Josephson eklemlerinin geçiş dinamiği
GÜNEŞ AYDINDOĞAN
Doktora
İngilizce
2017
Fizik ve Fizik MühendisliğiKoç ÜniversitesiFizik Ana Bilim Dalı
DOÇ. DR. KAAN GÜVEN
- Sıcaklık ve zaman bağımlı Ginzburg-Landau modeli
Temperature and time-dependent Ginzburg-Landau model
ZAFER ÇAKIR
Doktora
Türkçe
2006
MatematikKaradeniz Teknik ÜniversitesiMatematik Ana Bilim Dalı
PROF.DR. ERHAN COŞKUN
- Dynamics of optical soliton and surface plasmon in dielectric-metal and dielectric-metal-dielectric interfaces
Dielektrik-metal and dielektrik-metal-dielektrik arayüzlerde optik soliton ve yüzey plazmonlarının dinamiği
GÜNEŞ AYDINDOĞAN
Yüksek Lisans
İngilizce
2012
Fizik ve Fizik MühendisliğiKoç ÜniversitesiFizik Ana Bilim Dalı
YRD. DOÇ. DR. KAAN GÜVEN