Kuma oturan ve merkezi yüklenen model yüzey şerit temellerde taşıma gücü genişlik ilişkisi
Başlık çevirisi mevcut değil.
- Tez No: 7024
- Danışmanlar: DOÇ.DR. BAYRAM ALİ UZUNER
- Tez Türü: Yüksek Lisans
- Konular: İnşaat Mühendisliği, Civil Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 1989
- Dil: Türkçe
- Üniversite: Karadeniz Teknik Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Belirtilmemiş.
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 69
Özet
ÖZET Bu çalışmada düzlem deformasyon( plain strain) koşullarında, kuma oturan değişik geniş likteki yüzey şerit temellerin taşıma gücü-genişlik ilişkisi, kumun erki ve gevşek olması du rumlarında deneysel olarak araştırılmıştır. Deney düzeni; 0.1 Om iç genişlikte, Û.385m de rinlikte, 0.675m uzunlukta ve yan duvarları 8 mm camdan olan bir tank ile 4cm, 6c m ve 8c m genişlikteki ahşap model şerit temeller ve yükleme için yararlanılan Uç eksenli aletten oluş maktadır. Kuru kum tanka, tankın üzerine yerleştirilen bir ahşap kum serme tankının tabanın daki deliklerden yağdı rılarakCsı ki durum) veya tank genişliğindeki ince ve uzun aralığa sahip özel bir huniden akıtılarak(gevşek durum) yerleştirilmiştir. Dneylerde kullanılan kum OF(TRABZON) sahil kumu olup, maksimum veminimum kuru birim hacim ağırlıkları sırasıyla; V[Cmax=1.655gr/cm3, Y^ j* 1.358 gr/cm3 bulunmuştur. Deneylerde iki türsıkılık(Dr=0.80 (sıkı) ve Dr=0.185(gevşek)) kullanılmıştır. Her iki tür sıkılıktaki kumun içsel sürtünme açılarının 0,=4O.4(sıkı) ve 02»28.2(gevşek) olduğu kesme kutusu deneyleri ile bulunmuştur. Merkezi yüklenen ve genişlikleri 4cm, 6emve 8cm olan model şerit temellerle altı (6) tür deney yapılmış olup, her bir tür deney üç
Özet (Çeviri)
SUMMARY in this work; the relationship between bearing capacity and footing width was investigated experimentally for centrally loaded model atrip surface footings on 3and under plane strain and dense and loose conditions. Experimentally system consists of a tank; 8mm glass side walled, 0.10m inside length, 0.385m inside depth, 0.675m inside length and wood model strip footings with different widths(4em, 6cm, 8cm) and triaxial compression machine used for loading. Dry sand, was deposited in the tank by raining from the base holes of the above reservoir tank(dense state) or by flowing fromslot of a special funneKloose state) which has the same width(0.1 Om) as the tank. The sand used in the tests, was OF(TRABZQN) coastal sand which has maximum and minimum dry unitweigth respectively; Vdmaxa1i,559/cm3' YdmjnB1-358g/crn3 In the experiments two kind of densities (Rotative density, Dr»0.80; internal friction angle, 0j=4O.4 (dense state) and Dr=0.185; 02a28.2 (loose state)) were used. Six kind of tests were performed with centrally loaded model strip footings at 4cm, 6cm, 8cm widths and every kind of test was repeated three times. The reproducibility of experimental conditions and test results were shown by obtaining almost the same results from repeated tests of the same kind. it was found from the results of the tests that the relationship between bearing capacity (ultimate) and footing width was linear for centrally loaded surface strip footings on sand. This finding is in agreement with ahe existing theories and the previous experimental works. The ot her features like failure planes, failure modes, etc. are also in agreement with the previous works. it was found that the experimental bearing capacity valuesOn other words, Ny bearing ca pacity factors) are bigger than the values given by the existing bearing capacity theories. Accor ding to this result conformed by the previous researchers, the existing bearing capacity theories are on the conservative safe side, it Is obvious that this conflicts with the condition of being economical, it is believed that thi disagreement is due to either from theories or the determi nation of the internal friction angles used. This disagreement by further comprehensive works. ¥1
Benzer Tezler
- Kuma oturan yüzey model şerit temelin taşıma gücünün rölatif sıkılıkla değişimi
Varition of bearing capacity of model surface strip footing resting on sand with relative density
MEHMET TÜTÜNCÜ
Yüksek Lisans
Türkçe
2019
İnşaat MühendisliğiKaradeniz Teknik Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
DOÇ. DR. EROL ŞADOĞLU
- Donatılı kuma oturan eksantrik yüklü model sığ şerit temelin taşıma gücü
The bearing capacity of the eccentrically loaded model shallow strip footing on reinforced sand
EROL ŞADOĞLU
Doktora
Türkçe
2009
İnşaat MühendisliğiKaradeniz Teknik Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
PROF. DR. BAYRAM ALİ UZUNER
- Donatılı kuma oturan eksantrik yüklü model şerit temelin taşıma gücü
The Bearing capacity of the eccent rically loaded model strip footing on reinforced sand
BERKAN MOROĞLU
Doktora
Türkçe
2001
İnşaat MühendisliğiKaradeniz Teknik Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
PROF. BAYRAM ALİ UZUNER
- Geosentetik donatılı kum zemine oturan şerit temellerin analizi
Analysis of strip footings on geosynthetic reinforced sand
ELİF ÇİÇEK
Doktora
Türkçe
2011
İnşaat MühendisliğiAtatürk Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
PROF. DR. F. EROL GÜLER
PROF. DR. TEMEL YETİMOĞLU
- Improvement of bearing capacity of shallow foundation on sand reinforced with polyethylene terephthalate (PET) flakes
Polietilen tereftalat (PET) pulu kullanilarak iyileştirilmiş kuma oturan yüzeysel temelin taşima gücünün iyileştirilmesi
NICHIRVAN RAMADHAN TAHER TAHER
Doktora
İngilizce
2024
İnşaat MühendisliğiFırat Üniversitesiİnşaat Mühendisliği Ana Bilim Dalı
DOÇ. DR. HÜSEYİN SUHA AKSOY