Karbon fiber-epoksi kompozitlerde grafen oksit ve halloysit nanotüp katkısının arayüzey performansına etkisinin fiber demeti testleri ile belirlenmesi
Determination of the effect of graphene oxide and halloysite nanotube fillers on the interface performance with fiber bundletests of carbon fiber-epoxy composites
- Tez No: 714564
- Danışmanlar: DOÇ. DR. VOLKAN ESKİZEYBEK
- Tez Türü: Yüksek Lisans
- Konular: Mühendislik Bilimleri, Engineering Sciences
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2022
- Dil: Türkçe
- Üniversite: Çanakkale Onsekiz Mart Üniversitesi
- Enstitü: Lisansüstü Eğitim Enstitüsü
- Ana Bilim Dalı: Biyomühendislik ve Malzeme Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 68
Özet
Fiber takviyeli polimer kompozitlerin mekanik performansını iyileştirmek amacıyla nano boyutlu takviyeler son yılların önemli malzeme teknolojilerinden biri olarak kullanılmaktadır. Fiber takviyeli kompozitlerde fiber-matriks ara yüzey yapışmasının geliştirilmesi ile matriks tarafından yönetilen kalınlık doğrultusundaki mekanik özellikler iyileştirilebilir. Bu amaçla bu tez çalışmasında, hallosite nanotüp (HNT) ve grafen oksit (GO) nano takviyelerinin epoksi matrikse ilaveleri yapılmıştır. Nano parçacıkların epoksi reçine içerisinde dağılımını kolaylaştırmak için GO ve HNT yüzey uyumlaştırıcılar ile fonksiyonelleştirilmiştir. Reçineye ilave edilmeden önce GO ve HNT tozlarının moleküler bağ yapıları, faz analizleri ve morfolojik analizleri gerçekleştirilmiştir. FTIR sonucuna göre nano parçacıklar başarıyla modifiye edilmiştir. Modifiye edilmiş veya saf haldeki GO ve HNT tozları tek başına veya bunların karışımları olarak epoksi reçineye ilave edilmişlerdir. Hazırlanan epoksi nanokompozitleri ortasına karbon fiber demeti yerleştirilmiş silikon kalıplara dökülerek mekanik test numuneleri hazırlanmıştır. Nanoparçacık takviyesinin fiber-matriks ara yüzey mekanik performansa etkisinin belirlenmesi için enine fiber demeti testleri gerçekleştirilmiştir. Enine fiber çekme testi fiber-matriks ara yüzeyinin dayanımına ve ara yüzeyin dayanımını arttırmak için bu ara yüzeyde yapılacak değişik modifikasyonlara karşı çok hassas olduğu için özellikle tercih edilmiştir. Ardından kırılma yüzeyleri elektron mikroskopisi ile incelenerek nanoparçacık takviyesinin kırılma etkisi değerlendirilmiştir.
Özet (Çeviri)
In order to improve the mechanical performance of fiber-reinforced polymer matrix composites, nano-sized reinforcements have been used as one of the important material technologies in recent years. Matrix governed mechanical properties at the thickness direction can be improved by improving fiber-matrix interfacial adhesion in fiber-reinforced composites,. For this purpose, in this thesis, hallosite nanotube (HNT) and graphene oxide (GO) nano reinforcements were added to the epoxy matrix. GO and HNT are functionalized to facilitate the dispersion of nanoparticles in the epoxy resin. Molecular bond structures, phase analyzes and morphological analyzes of GO and HNT powders were performed before they were added to the resin. According to the FTIR result, the nanoparticles were successfully modified. Modified or pure GO and HNT powders were added to the epoxy resin alone or as a mixture of them. Mechanical test specimens were prepared by pouring the prepared epoxy nanocomposites into silicon molds with a carbon fiber bundle in the middle. Fiber bundle tests were carried out to determine the effect of nanoparticle reinforcement on interlayer mechanical performance. The transverse fiber tensile test is especially preferred because it is very sensitive to the strength of the fiber/matrix interface and to different modifications to be made at this interface in order to increase the strength of the interface. Then, samples after failure were examined by electron microscopy to and the fracture effect of the nanoparticle reinforcement was evaluated.
Benzer Tezler
- Modification of polyamide flock fibers and their use in composites
Poliamid flok fiberlerinin modifikasyonu ve kompozitlerde kullanımı
MURAT SAN
Yüksek Lisans
İngilizce
2024
Kimya MühendisliğiOrta Doğu Teknik ÜniversitesiKimya Mühendisliği Ana Bilim Dalı
DOÇ. DR. HARUN KOKU
PROF. DR. BORA MAVİŞ
- Poli(amido amin) katkılı grafen nanokompozitlerin karakterizasyonu
Characterization of poly(amido amine) functionalized graphene nanocomposites
NURİ KARAKURT
Yüksek Lisans
Türkçe
2016
KimyaEge ÜniversitesiMalzeme Bilimi ve Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. SEÇKİN ERDEN
- The effect of production parameters on the properties of continuous graphene oxide fibers
Üretim parametrelerinin sürekli grafen lif özellikleri üzerine etkisi
MERVİN ÖLMEZ
Yüksek Lisans
İngilizce
2018
Polimer Bilim ve Teknolojisiİstanbul Teknik ÜniversitesiPolimer Bilim ve Teknolojisi Ana Bilim Dalı
PROF. DR. HACER AYŞEN ÖNEN
- Elektrospun PAN nanofiber ve grafen oksit ile takviye edilmiş polimer kompozit tabakaların mekanik performansının belirlenmesi
Determination of mechanical performance of electrospun PAN nanofiber and graphen oxide reinforced polymer composite plates
MUSTAFA SEVBAN AKKAYA
Yüksek Lisans
Türkçe
2019
Mühendislik BilimleriÇanakkale Onsekiz Mart ÜniversitesiBiyomühendislik ve Malzeme Mühendisliği Ana Bilim Dalı
DR. ÖĞR. ÜYESİ VOLKAN ESKİZEYBEK
- Karbon iplik dolgulu grafen/epoksi nanokompozitlerin özellikleri
Properti̇es of carbon fi̇ber rei̇nforced graphene/epoxy nanocomposi̇tes
AMİR GHORBANİ
Yüksek Lisans
Türkçe
2014
Makine MühendisliğiEge ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. SEÇKİN ERDEN