Development and validation of a biomechanical model of human upper arm
İnsan kolunun biyomekanik modelinin geliştirilmesi ve doğrulanması
- Tez No: 747706
- Danışmanlar: PROF. DR. ROGER M BARTLETT
- Tez Türü: Doktora
- Konular: Mühendislik Bilimleri, Engineering Sciences
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 1998
- Dil: İngilizce
- Üniversite: Manchester Metropolıtan Unıversıty
- Enstitü: Yurtdışı Enstitü
- Ana Bilim Dalı: Biyomedikal Ana Bilim Dalı
- Bilim Dalı: Biyomekanik Bilim Dalı
- Sayfa Sayısı: Belirtilmemiş.
Özet
Bu tez kapsamında deri-yağ doku kas doku yapısı canlı doku üzerinden incelendi. Deri-yağ doku-kas doku yapısının (kitle) esneklik kitle katsayısı (Bulk Modulus) belirlemek için test cihazı geliştirildi. Geliştirilen deney cihazı kullanılarak kitle yapının gerilim-gerinim, sünme ve gerilim-gevşeme tesleri gerçekleştirildi. Deneysel sonuçlar sonlu elemanlar metodu kullanılarak doğrulaması gerçekleştirildi.
Özet (Çeviri)
A methodology was developed to study in vivo muscular bulk tissue behaviour. Muscular bulk tissue can be regarded as composite, non-isotropic, incompressible, nonlinear viscoelastic material from the biomechanical point of view. The human upper arm was chosen to investigate the bulk properties. To determine the mechanical properties of the bulk tissue in vivo, required accurate geometry of the tissue, which was obtained by using Magnetic Resonance Imaging. A new algorithm, consequently, new software was developed for creating a realistic finite element mesh. A new testing machine and control software were designed to investigate the response of the muscle bulk tissue under compression. The testing machine is capable of running three different type of tests which are creep, stress-relaxation and stress-strain tests. Contracted and relaxed test conditions were applied. Specific mechanical models - the Voigt model for creep behaviour or the Maxell model for stress-relaxation behaviour - were developed for different type of experiments. Both the creep and stress-relaxation and the stress-strain behaviour of the muscular bulk tissue were represented by using a standard linear solid model. The elastic modulus of bulk tissue was estimated from these models for both test conditions. Finally, a three-dimensional finite element model was created by using mechanical modelling parameters with a realistic internal geometry of the human upper arm. A new computational framework was developed to apply the finite element method to anisotropic, viscoelastic soft tissue. Results showed that the formulation could represent anisotropy and time dependent behaviour of soft biological tissue
Benzer Tezler
- Finite element analysis of cervical spine & finite element modeling of knee joint
Servikal omurun sonlu eleman analizi & diz ekleminin sonlu eleman modellemesi
MUZAMMIL MUMTAZ
Yüksek Lisans
İngilizce
2017
Biyomühendislikİstanbul Medipol ÜniversitesiBiyomedikal Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DENİZ UFUK ERBULUT
- Açı temelli öznitelik çıkarımı ile üst vücut postür sınıflandırması
UPPER-BODY POSTURE CLASSIFICATION USING ANGLE-BASED FEATURE EXTRACTION
RABİA AYŞE GÜZEL
Yüksek Lisans
Türkçe
2026
Bilgisayar Mühendisliği Bilimleri-Bilgisayar ve KontrolSakarya ÜniversitesiBilgisayar Mühendisliği Ana Bilim Dalı
DOÇ. DR. İSMAİL ÖZTEL
- Evsel atıktan enerji üretimi: Gaziantep örneği
Energy production from manucipal waste–study case: Gaziantep city waste
MESUT CEM COŞKUNER
Yüksek Lisans
Türkçe
2015
Elektrik ve Elektronik Mühendisliğiİstanbul Teknik ÜniversitesiEnerji Bilimi ve Teknolojileri Ana Bilim Dalı
PROF. DR. KADİR ALP
- Ovulasyon indüksiyonu tedavisinde folliküler gelişimin ultrasonografik takibi
Başlık çevirisi yok
MERİH BAYRAM
Tıpta Uzmanlık
Türkçe
1987
Kadın Hastalıkları ve DoğumGazi ÜniversitesiKadın Hastalıkları ve Doğum Ana Bilim Dalı
DOÇ. DR. MÜLAZIM YILDIRIM