Atmosfer hava bağlantısı olmayan ürünler için sızdırmazlık kontrol yöntemi geliştirilmesi
Development of a tightness control method for products without atmosphere air connection
- Tez No: 803816
- Danışmanlar: PROF. DR. SEZGİN ERSOY
- Tez Türü: Yüksek Lisans
- Konular: Mekatronik Mühendisliği, Mechatronics Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2023
- Dil: Türkçe
- Üniversite: Marmara Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Mekatronik Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 39
Özet
Hava sızdırmazlık test yöntemleri ile sızdırmaz olması istenilen ürünlerin sızdırmazlık testleri gerçekleştirilmektedir. Bu sızdırmazlık testi ürünün bir fixture'e konulması ile başlar. Fixture'e konulan ürün içerisine basınçlı hava doldurulması ile iç basıncı arttırılır. Ürün daha önce hesaplanmış bir basınç değerine kadar, basınçlı hava ile doldurulur. İstenilen ürün için istenilen iç basınç değerine ulaşıldıktan sonra, hava doldurma işlemi bitirilir ve stabilizasyon süresi başlar. Bu süre sonunda ürün iç basıncında bir değişiklik olup olmaması durumuna göre ürünün sızdırmazlığı hakkında bilgi sahibi olunur. Ürün içerisine basınçlı hava doldurma işleminin yapılabilmesi için ürün üzerinde en az bir hava deliği bulunmak zorundadır. En az bir hava doldurulabilecek deliği olmayan ürünler bu yöntemler ile test edilememektedir. Geliştireceğimiz yeni yöntem ile atmosfer hava bağlantısı olmayan, kapalı ürünlerin sızdırmazlık testlerinin mümkün olması sağlanacaktır.
Özet (Çeviri)
With the air leakage test methods, the leakproofness tests of the products that are required to be leakproof are carried out. This leakage test starts with placing the product on a fixture. The internal pressure is increased by filling compressed air into the product placed in the Fixture. The product is filled with compressed air up to a previously calculated test pressure value. After the test pressure value is reached for the desired product, the air filling process is completed and the stabilization period begins. At the end of this period, information about the leakage of the product is obtained, depending on whether there is a change in the internal pressure of the product. In order to fill the product with compressed air, there must be an air hole on the product. Products without this air hole cannot be tested with these methods. With the new method we will develop, it will be possible to test the leakage of closed products without atmosphere-air connection.
Benzer Tezler
- The role of oxidative stress factors in the pathophysiology of Ocular Rosacea, analysis of tears and other materials
Oküler Rosacea patofizyolojisinde oksidatif stres faktörlerinin rolü, gözyaşı ve diğer materyallerin analizi
NİLÜFER YEŞİLIRMAK
Doktora
İngilizce
2023
BiyokimyaGazi ÜniversitesiTıbbi Biyokimya Ana Bilim Dalı
PROF. DR. NESLİHAN BUKAN
PROF. DR. JEAN-LOUIS BOURGES
- Establish a dataset of co-located in-situ and satellite data for sea ice in the Southern Ocean
Güney Okyanusu'nda bulunan deniz buzu için eş-konumlandırılmış uydu ve yersel gözlem veri seti oluşturma
ÖZGÜN OKTAR
Yüksek Lisans
İngilizce
2017
Deniz Bilimleriİstanbul Teknik ÜniversitesiDeniz Ulaştırma Mühendisliği Ana Bilim Dalı
DOÇ. DR. BURCU ÖZSOY
- Plastik atıkların oksidatif ve inert ortamda ısıl ve katalitik bozunma ile karboksilli asitlere dönüşümü
Thermal and catalytic degradation of plastic wastes into carboxylic acids in oxidative or inert media
ADİL KOÇ
Doktora
Türkçe
2003
Kimya MühendisliğiAnkara ÜniversitesiKimya Mühendisliği Ana Bilim Dalı
PROF. DR. Y. ALİ BİLGESÜ
- Cephe kaplama sistemlerinin performans gereksinimleri açısından değerlendirilmesi
Evaluation of facade cladding systems with regard to performance requirements
BÜŞRA SİRKECİ
Yüksek Lisans
Türkçe
2017
Mimarlıkİstanbul Teknik ÜniversitesiMimarlık Ana Bilim Dalı
PROF. DR. LEYLA TANAÇAN
- Francis türbini yayıcısındaki girdap oluşumunun etkisini azaltma yöntemlerinin hesaplamalı akışkanlar dinamiği analizleriyle incelenmesi
Investigation of methods to mitigate the effect of vortex formation in the francis turbine draft tube with computational fluid dynamics analysis
KAĞAN ÇAĞLAYAN
Yüksek Lisans
Türkçe
2024
Enerjiİstanbul Teknik ÜniversitesiEnerji Bilim ve Teknoloji Ana Bilim Dalı
PROF. DR. ERKAN AYDER