Geri Dön

Experimental investigation of the effect of dust deposition on photovoltaic module energy performance

Toz birikiminin fotovoltaik modül enerji performansı üzerindeki etkisinin deneysel araştırılması

  1. Tez No: 810543
  2. Yazar: AZIZA IDRISS WARSAMA
  3. Danışmanlar: DOÇ. DR. SELÇUK SELİMLİ
  4. Tez Türü: Yüksek Lisans
  5. Konular: Enerji, Energy
  6. Anahtar Kelimeler: Belirtilmemiş.
  7. Yıl: 2023
  8. Dil: İngilizce
  9. Üniversite: Karabük Üniversitesi
  10. Enstitü: Lisansüstü Eğitim Enstitüsü
  11. Ana Bilim Dalı: Enerji Sistemleri Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 73

Özet

Günümüzde güneş enerjisi, yaşamımız ve çevremiz için önemli ve çok faydalı bir kaynak haline gelmiştir. Fotovoltaik panel, temiz bir enerji geleceği elde etmek için erişilebilirliği açısından en çok kullanılan teknolojidir. Fotovoltaik panellerin performansı, kuruldukları yerin iklim ve çevre koşullarından etkilenir. Bir PV panelin yüzeyinde toz birikmesi, PV panelin performansını düşüren faktörlerden biridir. Deneysel çalışmamızda, toz birikiminin fotovoltaik panellerin elektriksel ve termal performansı üzerindeki etkisini inceledik. Fotovoltaik panellerin performansındaki düşüşü daha iyi görmek için yataya göre 40°'de eğimli olarak 50 W'lık dört özdeş PV paneli (PV1, PV2, PV3 ve PV4) denendi. Bu çalışmanın sonuçlarına göre 61 μm toz partikülleri için PV2, PV3 ve PV4 panellerinin ürettiği ortalama güçlerde %18,57, %30,34 ve %45,25 oranında azalma olduğu ve ortalama elektrik verimliliğinde azalmanın ise PV1 paneline göre %2,5, %4,1, ve %6 olduğubelirlenmiştir. PV2, PV3 ve PV4 ekserji verimleri PV1'e göre 2,8%, 4,4% ve 6,7% azalmıştır. PV1 ile karşılaştırıldığında, 109 μm toz parçacıkları için sonuçlar, PV2, PV3 ve PV4 panelleri tarafından üretilen ortalama güç kaybının sırasıyla %13,31, %20,36 ve %26,66 ve ortalama elektrik verimliliğindeki düşüşün sırasıyla %1,7, %2,7 ve %3,6 olduğunu gösterdi. Ekserji verimliliğinde azalma sırasıyla %2, %2,9 ve %4,2 idi.

Özet (Çeviri)

Nowadays, solar energy has become an important and very beneficial source of our life and for our environment. The photovoltaic panel is the most used technology grace to its accessibility to achieve a clean energy future. The performance of photovoltaic panels is affected by the climatic and environmental conditions of their place of installation. The deposition of dust on the surface of a PV panel is one of the factors that degrades the performance of PV module. PV module temperature has a negative effect on the efficiency of photovoltaic systems, too. In our experimental study, we examine the effect of dust deposition on the electrical and thermal performance of photovoltaic panels. Four identical PV panels (PV1, PV2, PV3 and PV4) of 50 W were experimented at inclined at 40° with respect to the horizontal to better see the degradation of the performance of photovoltaic panels. According to the results of this study, it was found that for 61 μm dust particles, the average powers generated by the PV2, PV3 and PV4 panels were reduced by 18.57%, 30.34% and 45.25%, and the reduction in average electrical efficiency was 2.5%, 4.1% and 6% by reference to the PV1 panel. The exergy efficiencies of PV2, PV3 and PV4 decreased by 2.8%, 4.4% and 6.7% compared to PV1. Comparing with PV1, for 109 μm dust particles, the results showed that the average power degradation generated by the PV2, PV3 and PV4 panels was 13.31%, 20.36% and 26.66% and the reduction in efficiency average electricity was respectively 1.7%, 2.7% and 3.6%. Exergy efficiency reduction was 2%, 2.9%, and 4.2%, respectively.

Benzer Tezler

  1. Bisfenol A'nın fotokimyasal ileri oksidasyon prosesleri ile arıtımında toksisite ve östrojenik aktivite değişimleri

    Toxicity and estrogenic activity changes during treatment of bisphenol A by photochemical advanced oxidation processes

    DUYGU DURSUN

    Yüksek Lisans

    Türkçe

    Türkçe

    2014

    Çevre Mühendisliğiİstanbul Teknik Üniversitesi

    Çevre Bilimleri Ana Bilim Dalı

    DOÇ. DR. TUĞBA ÖLMEZ HANCI

  2. Development of QCM sensors for measuring particulate matter concentration

    QCM sensörlerinin partikül madde konsantrasyonunu ölçmek için geliştirilmesi

    MAJID JAVADZADEHKALKHORAN

    Doktora

    İngilizce

    İngilizce

    2024

    Makine Mühendisliğiİstanbul Teknik Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    PROF. DR. LEVENT TRABZON

  3. Fotovoltaik sistemlerde tozlanmanın panel verimi üzerindeki etkilerinin deneysel olarak araştırılması

    Experimental investigation of the effects of dust accumulation on panel efficiency in photovoltaic systems

    MERVE TAN BAYAR

    Yüksek Lisans

    Türkçe

    Türkçe

    2022

    Elektrik ve Elektronik MühendisliğiBatman Üniversitesi

    Elektrik-Elektronik Mühendisliği Ana Bilim Dalı

    DR. ÖĞR. ÜYESİ İSMAİL KAYRİ

  4. Sızdırmazlık elemanlarına çevre koşullarının etkisinin deneysel incelenmesi

    Experimental investigation of the impact of environmental conditions on sealing elements

    ÖNDER TÜRKÖLMEZ

    Yüksek Lisans

    Türkçe

    Türkçe

    2020

    Makine Mühendisliğiİstanbul Teknik Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    DR. ÖĞR. ÜYESİ ZEYNEP PARLAR

  5. Fren balatalarında kullanılan lastik tozunun boyutunun etkisi ve tribolojik özelliklerinin deneysel araştırılması

    Experimental investigation of the effect of tire powder size used in brake pads on tribological properties

    DAMLA KAYA

    Yüksek Lisans

    Türkçe

    Türkçe

    2023

    Makine MühendisliğiSelçuk Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    PROF. DR. MURAT CİNİVİZ