45s5 ve S53P4 biyoaktif cam içeren deneysel dental kompozitlerin hazırlanması ve karakterizasyonu
Preparation and characterization of experimental dental composites containing 45s5 and S53P4 bioactive glasses
- Tez No: 939367
- Danışmanlar: PROF. DR. SEVİL YÜCEL, DR. ÖĞR. ÜYESİ YELİZ ELALMIŞ
- Tez Türü: Yüksek Lisans
- Konular: Biyomühendislik, Bioengineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2025
- Dil: Türkçe
- Üniversite: Yıldız Teknik Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Biyomühendislik Ana Bilim Dalı
- Bilim Dalı: Biyomühendislik Bilim Dalı
- Sayfa Sayısı: 93
Özet
Dental kompzoitler restoratif tedavide, estetik kaygılar ve toksisite endişesi nedeniyle amalgamların yerine kullanılmaya başlanmıştır. Temel olarak monomer, hızlandırıcı ve fotobaşlatıcı içeren organik bir faz, dolgu maddeleri içeren bir inorganik faz ve bağlayıcı silan ajanı içeren bir ara fazdan oluşmaktadır. Bu tez çalışmasında, deneysel dental kompozitler inert ve biyoaktif kompozitler olarak hazırlanmış ve karakterize edilmiştir. Hazırlanan deneysel dental kompozitlerin organik fazı bisfenol glisidil metakrilat (Bis-GMA) ve trietilen glikol dimetakrilat (TEGDMA) monomerleri, hızlandırıcı etil-4-dimetil amino benzoat (EDMAB) ve foto-başlatıcı kamforkinondan (CQ); inorganik faz ise Baryum cam (Ba-cam), nanosilika (nSiO2) ve 45S5 ile S53P4 biyoaktif camlarından oluşturulmuş, ara fazda silan ajanı olarak metakriloksi propil trimetoksisilan (g-MPS) kullanılmıştır. Deneysel dental kompozitler hazırlanırken inert kompozit (İK) formülasyonundaki inorganik fazda yalnızca silan ile muamele edilmiş Ba-cam ve nSiO2 kullanılırken, hazırlanan biyoaktif kompozitlerde (BK) silan ile muamele edilmiş Ba-cam, nSiO2 xv ve biyoaktif cam kullanılmıştır. Hazırlanan deneysel dental kompozitlerin esneme dayanımı ve elastisite modülünün değerlendirmesi için 3-nokta eğme test, mikrosertlik özelliği için Vickers mikrosertlik testi, su absorpsiyonu ve çözünürlük testi, polimerizasyon derinliği tespiti, kompozit renk tespiti, radyoopasite, apatit oluşturma kabiliyetini incelemek için in vitro biyoaktivite çalışması, in vitro sitotoksisite çalışması ve antibakteriyet etkinlik çalışması yapılmıştır. Elde edilen sonuçlar, biyoaktif deneysel dental kompozitlerin literatüre uygun mekanik özellikler gösterdiğini, uygun polimerizasyon derecesi ve radyoopasiteye sahip olduğunu, yeterli su absorpsiyonu ve çözünürlük özellikleri gösterdiğini, yüzeyinde hidroksiapatit oluşumu gözlendiğini, sitotoksik olmadığını ve antibakteriyel etkinlik sergilediğini göstermiştir. Böylelikle, hazırlanan deneysel dental kompozitlerin biyoaktif özellik gösterdiği ve restoratif materyal olarak kullanımına uygun olduğu belirlenmiştir.
Özet (Çeviri)
Dental composites have been used in restorative treatment instead of amalgams due to aesthetic and toxicity concerns. Dental composites consist of an organic phase containing monomer, accelerator and photoinitiator, an inorganic phase containing fillers and an intermediate phase containing a bonding silane agent. In this thesis study, experimental dental composites were prepared and characterized as inert and bioactive composites. The organic phase of the prepared experimental dental composites consisted of bisphenol glycidyl methacrylate (Bis-GMA) and triethylene glycol dimethacrylate (TEGDMA) monomers, accelerator ethyl-4-dimethyl amino benzoate (EDMAB) and photoinitiator camphorquinone (CQ); the inorganic phase was composed of barium glass (Ba-glass), nanosilica (nSiO2) and bioactive glasses 45S5 and S53P4, and methacryloxy propyl trimethoxysilane (g-MPS) was used as a silane agent in the interphase. xvii When preparing the experimental dental composites, silanized Ba-glass and nSiO2 were used in the inorganic phase in the inert composite (IK) formulation, while silanized Ba-glass, nSiO2 and bioactive glass were used in the prepared bioactive composites (BK) formulation. 3-point bending test was performed in order to evaluate the flexural strength and elastic modulus of the prepared experimental dental composites, Vickers microhardness test applied for microhardness; water absorption and solubility test, polymerization depth determination, composite colour determination, and radiopacity test were accomplished. In order to determine the bioactivity properties, in vitro bioactivity study was performed. Additionally, in vitro cytotoxicity study and antibacterial activity study were applied. The results showed that the bioactive experimental dental composites exhibited mechanical properties in accordance with the literature, had appropriate polymerization degree and radiopacity, showed adequate water absorption and solubility properties, had hydroxyapatite formation on the surface, were not cytotoxic, and exhibited antibacterial activity. Thus, it was determined that the prepared experimental dental composites were suitable for use as restorative materials.
Benzer Tezler
- 45s5 ve S53P4 biyoaktif camların tek başına ve klorheksidinle kombine kullanımının matriks metalloproteinaz ekspresyonuna ve dentin yüzey özelliklerine etkisinin in vitro değerlendirilmesi
In vitro evaluation of the effects of 45S5 and S43P4 bioactives glasses alone and i̇n combination with clorhexi̇di̇ne on matrix metalloproteinase expression and denti̇n surface properties
ASLIHAN YELKENCİ
Doktora
Türkçe
2024
Diş HekimliğiSağlık Bilimleri ÜniversitesiÇocuk Diş Hekimliği Ana Bilim Dalı
PROF. DR. GÜNSELİ GÜVEN POLAT
- Stereolitografi yöntemi ile 45S5 ve 70S biyoaktif cam katkılanmış polikaprolakton ve polilaktik asit kompozit kemik iskelesi üretimi
Production of 45S5 and 70S bioactive glass doped polycaprolactone and polylactic acid composite bone scaffolds by stereolithography
DENİZ SAKARYA
Doktora
Türkçe
2024
BiyomühendislikYıldız Teknik ÜniversitesiBiyomühendislik Ana Bilim Dalı
PROF. DR. SEVİL YÜCEL
DOÇ. DR. YEŞİM MÜGE ŞAHİN
- Biyoaktif cam ve hidroksiapatit içeren polikaprolakton nanoliflerin elektroeğirme yöntemi ile hazırlanması ve karakterizasyonu
Preparation and characterization of bioactive glass and hydroxyapatite containing polycaprolactone nanofibers by electrospinning method
RABİA KONYALI EKEN
Yüksek Lisans
Türkçe
2019
Metalurji MühendisliğiManisa Celal Bayar ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
DOÇ. DR. AYLİN MÜYESSER DELİORMANLI
- Development of a bioactive glass-ceramic co-doped with lanthanum and boron and its biological in vitro studies for bone regeneration applications
Lantan ve bor katkılı biyoaktif cam seramik geliştirilmesi ve kemik rejenerasyonu uygulamaları için in-vitro biyolojik çalışmaları
RIHAB BADRADDIN SHUKUR AL-AKASHI
Yüksek Lisans
İngilizce
2024
Mühendislik BilimleriKarabük ÜniversitesiBiyomedikal Mühendisliği Ana Bilim Dalı
DOÇ. DR. ERKAN KOÇ
- Sol-gel synthesized 45s5 bioactive powder and glass ceramics
45s5 biyoaktif toz ve cam seramiklerin sol-jel yöntemiyle sentezlenmesi
CAN ORAL
Yüksek Lisans
İngilizce
2020
BiyomühendislikGebze Teknik ÜniversitesiMalzeme Bilimi ve Makine Mühendisliği Ana Bilim Dalı
PROF. DR. AHMET YAVUZ ORAL