Endüstriyel atıksu arıtma sistemlerinin SCADA temelli otomasyonu, RTU/PLC kontrolü ve bulanık mantık kullanılarak pH kontrolünün gerçekleştirilmesi
SCADA based automation and RTU/PLC control of the industrial wastewater treatment systems and implementing the pH control using fuzzy logic
- Tez No: 106357
- Danışmanlar: PROF. DR. GALİP CANSEVER, DOÇ. DR. CELAL KOCATEPE
- Tez Türü: Yüksek Lisans
- Konular: Elektrik ve Elektronik Mühendisliği, Electrical and Electronics Engineering
- Anahtar Kelimeler: Atıksu arıtma, kontrol, SCADA, otomasyon, bulanık mantık. xııı, Atık su arıtma sistemleri, Bulanık mantık, Hidrojen iyon konsantrasyonu, PLC, Wastewater Treatment, Control, SCAD A, Automation, Fuzzy Logic. xiv, Waste water treatment systems, Fuzzy logic, Hydrogen-ion concentration, Programmable logic controller, SCADA
- Yıl: 2001
- Dil: Türkçe
- Üniversite: Yıldız Teknik Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Elektrik Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: Belirtilmemiş.
Özet
ÖZET Bu çalışma endüstriyel atıksu arıtma sistemlerinin otomasyonu ile ilgili tüm bilgileri sunmak ve bu işlemi gerçekleştirmek isteyen mühendislere yol göstermek amacıyla yapılmıştır. Bu nedenle ilk olarak atıksu arıtma sistemlerinin genel yapıları incelenmiş ve bu sistemlerde uygulanan işlemler anlatılmıştır. Daha sonra tasarlanacak olan sistemin genel yapısı, sistemde kullanılan enstrümanlar ve proses mantığı anlatılmış, böylece incelenecek sisteme giriş yapılmıştır. Bundan sonra kontrol sistemlerine geçilmiş ve bu sistemlerde kullanılacak kontrol üniteleri olan RTU/PLC lerin donanım ve yazılımları tanıtılmıştır. Bu konu, sistemimizdeki ekipmanlardan bir kısmının lojik ve ladder diyagramları verilerek ve PLC yazılımları gösterilerek örneklenmiştir. Daha sonra sistemdeki RTU/PLC lerin birbiriyle ve bilgisayarla haberleşmelerini sağlayan modemler genel olarak tanıtılmış ve örnek bir modem bağlantılarının şekilleri gösterilmiştir. Bundan sonra ise SCADA Programının tanıtılmış ve bu programda ekran sayfalarının, veri tabanının ve haberleşmelerin tasarlanması anlatılmış ve bazı animasyonların nasıl gerçekleştirildiği gösterilmiştir. Son konuda ise pH nötralizasyonu için tasarlanan bir bulanık mantık kontrolörü tanıtılmış ve tasarım anlatılmıştır. Tasarlanan sistem gerçek bir sistem olup bu tezde anlatılanlar endüstriyel atıksu arıtma sistemlerinin otomasyonu konusunda oldukça detaylı bilgi sunmaktadır.
Özet (Çeviri)
ABSTRACT The aim of this work is to give a detailed information about the automation of the industrial wastewater treatment systems and to guide the engineers who want to implement this process. First of all the general structure of a wastewater treatment system is analysed and the processes applied in these systems are described. Secondly, the general structure of the system that is going to be designed, instruments to be used in this system and the process logic is described, thus making an entry to the system to be analysed. After these steps the hardware and the software of the RTU/PLCs which are the control units of these systems are defined, showing the PLC software and giving samples of the logical and ladder diagrams of some equipments used in the system. Then the modems used for the communication of the RTU/PLCs with each other and the computer, are generally described and the diagram of a sample modem connections is shown. Then followed the introduction of the SCAD A program and description of the screens, database and the communication desings in this program; also how some animations are implemented is shown. In the last part, the fuzzy logic control designed for the pH neutralization is introduced and the desing is analysed. The designed system herein is a real system and this thesis gives a very detailed information about the automation of the industrial wastewater treatment.
Benzer Tezler
- Üniversite ile ilgili kanun ve yönetmeliğin bilgisayara aktarılması
Başlık çevirisi yok
NAFİYE MESTANOĞLU
Yüksek Lisans
Türkçe
1985
Bilgisayar Mühendisliği Bilimleri-Bilgisayar ve KontrolEge ÜniversitesiBilgisayar Bilimleri Ana Bilim Dalı
PROF. DR. OĞUZ MANAS
- Akaryakıtla çalışan endüstriyel tav fırınlarında yanma, sıcaklık ve basıncın optimum kontrolu
Optimum control of combustion temperature and pressure in industrial tempering furnaces working with fuel-oil
MEHMET EROĞLU
Yüksek Lisans
Türkçe
1987
Makine MühendisliğiGazi ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. YÜCEL ERCAN
- Zymomonas mobilis NRRL B-14023 bakterisi ile şeker pancarı melası ve kuru üzümden etanol üretimi
Başlık çevirisi yok
ÜLKÜ BAŞER
- Endüstrileşmiş yapım sistemlerinin Türkiye'ye uyumu ve gelişme koşulları
The Appropriation and development conditions of industrialized building systems in Turkey
FİKRİ KOLENOĞLU
Yüksek Lisans
Türkçe
1987
İnşaat MühendisliğiGazi ÜniversitesiMimarlık Ana Bilim Dalı
DOÇ. DR. REŞAT ÖNGEN
- Havuçların haşlanmasında difüzyonun modellenmesi
Başlık çevirisi yok
FİGEN KAYMAK
Yüksek Lisans
Türkçe
1986
Gıda MühendisliğiEge ÜniversitesiGıda Mühendisliği Ana Bilim Dalı
DOÇ. DR. SUZAN KINCAL