SCADA sistemi yardımıyla enerji dağıtım sistemlerinin otomasyonu
Automation of the energy distribution systems with the help of SCADA
- Tez No: 129040
- Danışmanlar: DOÇ. DR. ETEM KÖKLÜKAYA
- Tez Türü: Yüksek Lisans
- Konular: Elektrik ve Elektronik Mühendisliği, Electrical and Electronics Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2002
- Dil: Türkçe
- Üniversite: Sakarya Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Elektrik ve Elektronik Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Elektrik Bilim Dalı
- Sayfa Sayısı: 153
Özet
ÖZET
Özet (Çeviri)
AUTOMATION OF THE ENERGY DISTRIBUTION SYSTEMS WITH THE HELP OF SCADA SUMMARY Keywords : SCADA, Middle Voltage Power Distribution Systems, Software The Supervisory Control And Data Acquisition (SCADA) implementation in energy distribution systems increases the efficiency of system operation and improves system-planning ability. Since the electrical energy consumption doubles in the developed and the developing countries within 10 to 6 years respectively. This reality increases the importance of energy system planning. Supervisory Control And Data Acquisition (SCADA), enables the operation, control and observation of the energy system from one operation room. The SCADA system consist of three parts; 1) Master Terminal Unit 2) Remote Terminal Unit 3) Communnication System In our country SCADA implemention in energy, distribution system is new. In this study, SCADA implementions for energy distribution systems are examined and SCADA application for an energy distribution system is given. XII
Benzer Tezler
- Scada sistemlerinin incelenmesi ve elektrik dağıtım şebekelerine uygulanması
Examination of the scada systems and application to the electrical distribution systems
BÜLENT ŞAHİN
Yüksek Lisans
Türkçe
2000
Elektrik ve Elektronik MühendisliğiMarmara ÜniversitesiElektrik Eğitimi Ana Bilim Dalı
YRD. DOÇ. DR. CANER AKÜNER
- SCADA sistemlerinde fider otomasyonu ile arıza izolasyonu ve bir bölge uygulamasının simülasyonu
Fault isolation by feeder automation in SCADA systems and simulation of application in a region
YAHYA SAKLI
Yüksek Lisans
Türkçe
2010
Elektrik ve Elektronik MühendisliğiSelçuk ÜniversitesiElektrik-Elektronik Mühendisliği Ana Bilim Dalı
PROF. DR. SAADETDİN HERDEM
- Uzaktan akıllı kesici kontrolü için yeni bir yaklaşım
A new approach to remote intelligent circuit breaker control
MALİK SAĞLAM
Yüksek Lisans
Türkçe
2019
Elektrik ve Elektronik MühendisliğiDüzce ÜniversitesiElektrik-Elektronik Mühendisliği Ana Bilim Dalı
PROF. DR. ALİ ÖZTÜRK
- Alçak gerilimde enerji otomasyonu-Örnek bir uygulama
Energy automation in low voltage-A model application
ALİ İLKER KULAKSIZ
Yüksek Lisans
Türkçe
2010
Mühendislik BilimleriOndokuz Mayıs ÜniversitesiElektrik-Elektronik Mühendisliği Ana Bilim Dalı
DOÇ. DR. OKAN ÖZGENENEL
- Bir endüstriyel fırın otomasyonu
Automation of an industrial furnace
MEHMET ALİ SİNAN USALAN
Yüksek Lisans
Türkçe
2015
Elektrik ve Elektronik MühendisliğiGazi ÜniversitesiElektrik Eğitimi Ana Bilim Dalı
DOÇ. DR. CEMAL YILMAZ