Process monitoring and chipping fault detection in drilling
Delme işleminde süreç izleme ve takım ağzındaki yerel kırılma tespiti
- Tez No: 151318
- Danışmanlar: Y.DOÇ.DR. İSMAİL LAZOĞLU
- Tez Türü: Yüksek Lisans
- Konular: Makine Mühendisliği, Mechanical Engineering
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2004
- Dil: İngilizce
- Üniversite: Koç Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Makine Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 167
Özet
Özet yok.
Özet (Çeviri)
ABSTRACT Drilling is one of the most important and fundamental machining process and widely used in automobile, aircraft, home appliance and electronic industries. Chipping is among the important process faults occur commonly in drilling. Chipping has serious adverse effects on the surface finish and dimensional accuracy of the workpiece. Furthermore, chipping may cause tool failure which may lead to part scrappage and/or damage to CNC machines. Therefore, reliable monitoring of chipping fault would be indispensable to benefit from the machining equipment in an optimal way including automated production. In this project, chipping is induced in various amounts and types to different drills supplied by Arcelik A.S. Extensive numbers of experiments were performed by utilizing the chipped drills under different machining conditions in a CNC machine tool. Machining forces were obtained from the experiments performed in order to establish monitoring features for different chipping types / amounts in time domain, in frequency domain using Fast Fourier Transform (FFT) and in time-frequency domain using Discrete Wavelet Transform (DWT). Among the chipping types, tip chipping is easily identified in time domain whereas, shank chipping and arbitrary chipping are better monitored in time-frequency domain.
Benzer Tezler
- IEEE 1149.1 standardı kullanarak test edilebilir lojik devre tasarımı
Testable lojik circit design by using IEEE 1149.1 standard
A.BETÜL TUNCER
Yüksek Lisans
Türkçe
1992
Elektrik ve Elektronik Mühendisliğiİstanbul Teknik ÜniversitesiPROF. DR. AHMET DERVİŞOĞLU
- Güney Marmara bölgesi sismik gürültü kaynaklarının konum ve zaman özelliklerinin incelenmesi
Investigation of spatial and temporal properties of seismic noise in the Guney Marmara region
UTKU KOÇUM
Yüksek Lisans
Türkçe
2016
Jeofizik Mühendisliğiİstanbul Teknik ÜniversitesiJeofizik Mühendisliği Ana Bilim Dalı
PROF. AYŞE KAŞLILAR ŞİŞMAN
- Sous vide üretim tekniği kullanılarak hazırlanan macar gulaş yemeğinde mikrobiyolojik kalitenin değerlendirilmesi
Evaluation of the microbiological quality of hungarian goulash prepared using the technique of sous vide
HANDE YILMAZ
Yüksek Lisans
Türkçe
2014
Beslenme ve DiyetetikGazi ÜniversitesiBeslenme ve Diyetetik Ana Bilim Dalı
DOÇ. SANİYE BİLİCİ
- Dinamik kalite kontrol yaklaşımı ile istatistiksel süreç izleme ve ayarlama
Statistical process monitoring and adjustment by dynamic quality control approach
DİDEM GÜLERYÜZ
Doktora
Türkçe
2020
Endüstri ve Endüstri Mühendisliğiİstanbul Üniversitesi-CerrahpaşaEndüstri Mühendisliği Ana Bilim Dalı
PROF. DR. ŞÜKRÜ ALP BARAY
- In-process monitoring and qualification of SLM produced nickel based superalloys using eddy current inspection method and a novel EC array probe design
SLM metodu ile üretilmiş nikel bazlı süperalaşımların girdap akımı metodu ile proses içi takibi ve kalifiye edilmesi ve yeni bir EC seri prob tasarımı
ERDEM BEKTAŞ
Doktora
İngilizce
2022
Makine MühendisliğiKoç ÜniversitesiMakine Mühendisliği Ana Bilim Dalı
PROF. DR. DEMİRCAN CANADİNÇ