Hava tekstüre iplik üretiminde; Hav yüksekliği, hav iplik kesiti ve silikon işleminin, bu iplikten yapılan kumaşın aşınma ve piling özelliklerine etkisinin araştırılması
Research into effect of loop size, effect yarn cross-section, and silicone treatment on the abrasion and pilling properties of fabric wowen with air jet texturized yarn
- Tez No: 154138
- Danışmanlar: DOÇ.DR. YUSUF ULCAY
- Tez Türü: Yüksek Lisans
- Konular: Tekstil ve Tekstil Mühendisliği, Textile and Textile Engineering
- Anahtar Kelimeler: Tekstüre, Hava Tekstüre, Şenil, Aşınma, Pilling, Eğilme rijitliği, Hava Geçirgenliği, Yansıma, İstatistiki Anova testi, İstatistiki Student Newman-Keuls Test, Texture, Air Jet Texture, Chenille, Abrasion, Pilling, Bending Rigidity, Air permeability, Light Reflection, Statistical Anova Test, Statistical Student Newman-Keuls Test
- Yıl: 2004
- Dil: Türkçe
- Üniversite: Uludağ Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Tekstil Mühendisliği Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 150
Özet
ÖZET Bu çalışmada ilk olarak şenil iplik ve polyester kontinü sentetik filamentlerin tekstüre üretim metotları, hava tekstüre ve şenil iplik kalitesine etki eden proses parametrelerine değinilmiştir. Tekstil yüzeylerinin aşınma, pilling, hava geçirgenliği ve kontinü filamentlerin kesit yapılan araştırılmıştır. Çalışma kapsamında dört farklı lif kesitinde, üç farklı hav yüksekliğinde ve ipliklerin bitim işleminde silikon içerikli kone yağı kullanılarak ve kullanılmayarak 24 adet farklı hava tekstüre iplik numunesi üretilmiştir. Piyasada çok sık kullanılan akrilik şenil iplik ile birlikte aynı özelliklerde dokuma kumaş numuneleri üretilmiştir. Numune kumaşlar, Nu-Martindale test cihazında 2500-5000-7500-10000- 20000 tur devirlerde aşınma testine tabii tutulmuştur. Bu testten çıkan kumaşların ağırlık kaybı oranlan, pilling görüntüleri, ışık yansıtma değerleri, eğilme rijitlikleri ve hava geçirgenlikleri ölçülmüştür. Test sonuçlanna göre aşınma, yansıma, eğilme rijitliği ve hava geçirgenliğinin diyagramlan çıkanlmış, sonuçlar istatistiki olarak analiz edilmiştir. Hava tekstüre ile şenil iplik kıyaslanmıştır.
Özet (Çeviri)
ABSTRACT This study firstly investigated the production methods of the chenille yarn and polyester continue Synthetic filament textured yarn and process parameters which influence air texture and chenille yarn quality. The studies are carried out regarding abrasion, pilling, reflection, air permeability properties of textile materials and the cross-section of filaments. 24 different air jet textured yarn samples are produced using four different filament cross-sections, three different loop sizes, with silicone and without silicone. Woven fabric samples are produced with PET air textured yarn samples and acrylic chenille which have common use in the market. Fabric samples are abraded at 2500-5000-7500-10000-20000 revolution in Nu- Martindale test equipment. Measurements include the weight lose ratio, pilling vision, light reflection values, bending rigidity, air permeability properties of abraded test samples. Reference to test results, the diagram of the weight lose, the light reflection, the bending, the air permeability are prepared and test results are analyzed by statistical methods. Air jet textured yarn has been compared with chenille yarn.
Benzer Tezler
- Poliamid 6 POY ve tekstüre iplik üretiminde kaliteyi etkileyen proses parametrelerinin incelenmesi
Investigation of process parameters affecting quality of polyamide 6 POY and textured yarn production
ZEYNEP ARSLAN
Yüksek Lisans
Türkçe
2016
Tekstil ve Tekstil MühendisliğiNamık Kemal ÜniversitesiTekstil Mühendisliği Ana Bilim Dalı
PROF. DR. FATMA GÖKTEPE
- Akrilik filament ipliğin tekstüre edilmesi
Texturing of acrylic filament yarn
ARAS MUTLU
Doktora
Türkçe
2021
Tekstil ve Tekstil Mühendisliğiİstanbul Teknik ÜniversitesiTekstil Mühendisliği Ana Bilim Dalı
PROF. DR. ALİ DEMİR
- Farklı filament inceliği ve filament kesit formu kullanılarak geri dönüşüm pet polimerinden (rPET) POY ve tekstüre (DTY) polyester ipliklerin eldesi ve örme ve dokuma kumaşların çeşitli performans özelliklerinin incelenmesi
Producing poy and texturized yarn (DTY) from recycled pet (rPET) polimer in different filament fineness and crossection and investigation of various performance characteristics of knitted and woven fabrics
GÜL KIRIŞ
Yüksek Lisans
Türkçe
2020
Tekstil ve Tekstil MühendisliğiSüleyman Demirel ÜniversitesiTekstil Mühendisliği Ana Bilim Dalı
DOÇ. DEMET YILMAZ
- Development of a blackout fabric with improved acoustic properties made from hollow bicomponent filament yarns
Boşluklu bikomponent filament ipliklerden mamul akustik özellikleri iyileştirilmiş blackout kumaş tasarımı
HACER MERVE BULUT
Yüksek Lisans
İngilizce
2024
Tekstil ve Tekstil Mühendisliğiİstanbul Teknik ÜniversitesiTekstil Mühendisliği Ana Bilim Dalı
PROF. DR. CEVZA CANDAN
- Besleme ipliği türlerinin (POY ve FDY) ve filament kesit şekillerinin hava-jeti ile tekstüre edilmiş iplik özelliklerine etkisi
Effects of feeder yarn types (POY and FDY) and filament cross-sectional shapes on the properties of air jet textured yarns
BURÇİN ÇİMENLİKAYA
Yüksek Lisans
Türkçe
2008
Tekstil ve Tekstil MühendisliğiMarmara ÜniversitesiTekstil Eğitimi Ana Bilim Dalı
DOÇ. DR. SUAT CANOĞLU