Doğrusal programlama modelinde maliyet minimizasyonu ve bir uygulama
Başlık çevirisi mevcut değil.
- Tez No: 15419
- Danışmanlar: DOÇ.DR. SİBKAT KAÇTIOĞLU
- Tez Türü: Yüksek Lisans
- Konular: İşletme, Business Administration
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 1991
- Dil: Türkçe
- Üniversite: Atatürk Üniversitesi
- Enstitü: Sosyal Bilimler Enstitüsü
- Ana Bilim Dalı: Belirtilmemiş.
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 96
Özet
Özet yok.
Özet (Çeviri)
78 SUMMARY Production planning and control are one of the first activity from the point of productivity and profitability for businesses. The minimization of the costs of raw materials plays important role in production planning and control. It is aimed to study the amount of savings to be obtained by minimizing the costs of raw materials which are used for the production of nine fodder in Erzurum Fodder Factory of Turkish Fodder Industry Corporation. Two different models established for each fodder, and fodder analysis values and some other conditions are accepted as constraints which are necessary in the models.The first models established on the basis of raw materials used in the factory, and the second models established on the basis of probable raw materials used for production. Additive materials are not included to both models. According to optimal solutions, in the first period egg- hen fodder 15.57 %, in the second period egg- hen fodder 14.77 %, in the egg- chick fodder 7.9 %, in the chicken grow fodder 12 %, in the chicken develop fodder 14.10 %, in the lamb- calf grow fodder 8.8 %, and in the urealess milk fodder 5.8 %, savings can be obtained. The results of the optimal solution for lamb- calf start fodder is equal to actual cost, therefore there is not savings. Optimal solution value for urealess nourishment fodder is much higher actual costHowever the urealess nourisment fodder analysis values were not physically possible to find of less than optimal solution costs, so it is concluded that of factory does not satisfy the analysis values. At the end of the study, some purposals put forward in order to reduce production cost in the factory.
Benzer Tezler
- Development of a home energy management system to increase renewable self-consumption in households considering demand-side flexibility
Talep tarafı esnekliği dikkate alınarak konutlarda yenilenebilir öz tüketimi artırmaya yönelik bir ev enerji yönetim sistemi geliştirilmesi
ANIL CAN DUMAN
Doktora
İngilizce
2024
Enerjiİstanbul Teknik ÜniversitesiEnerji Bilim ve Teknoloji Ana Bilim Dalı
PROF. DR. ÖNDER GÜLER
- Tersine lojistik ağlarında sürdürülebilirlik yaklaşımına yönelik çok amaçlı bir model önerisi: Elektronik atık sektöründe bir uygulama
A model for sustainable approach in reverse logistics networks: A case study in electronic waste sector
GÜL TEKİN TEMUR
Doktora
Türkçe
2012
Endüstri ve Endüstri Mühendisliğiİstanbul Teknik Üniversitesiİşletme Mühendisliği Ana Bilim Dalı
DOÇ. DR. BERSAM BOLAT
- Ulaştırma modelleri ile maliyet minimizasyonu ve ayakkabı endüstrisinde tedarik zinciri yönetimi uygulaması
Transportation cost minimization by using transporation models and an application in the footwear industry
GÖKTUĞ CANDAN
- Doğrusal bir programlama modeli ve bir çözgülü örme işletmesinde uygulaması
Linear programming model and application of the model in a warp knitting factory
BOĞAÇHAN DOĞANAY
Yüksek Lisans
Türkçe
2001
Tekstil ve Tekstil Mühendisliğiİstanbul Teknik ÜniversitesiTekstil Mühendisliği Ana Bilim Dalı
DOÇ. DR. CEVZA CANDAN
- Ömrünü tamamlamış araçların geri kazanımı için sürdürülebilir çok amaçlı tersine lojistik ağ tasarımı
Sustainable multi-objective reverse logistics network design for the recovery of end of life vehi̇cles
SEZİN BALCI
Yüksek Lisans
Türkçe
2017
Endüstri ve Endüstri Mühendisliğiİstanbul Ticaret ÜniversitesiEndüstri Mühendisliği Ana Bilim Dalı
YRD. DOÇ. DR. BERK AYVAZ