Geri Dön

İki eksenli dairesel enterpolasyon yapabilen CNC kontrol devresi tasarımı

The project of CNC control cycle which can make double axis circle interpolation

  1. Tez No: 154850
  2. Yazar: SERMİN YAZICI
  3. Danışmanlar: Y.DOÇ.DR. CÜNEYT OYSU
  4. Tez Türü: Yüksek Lisans
  5. Konular: Kimya Mühendisliği, Chemical Engineering
  6. Anahtar Kelimeler: Dairesel ve Doğrusal Enterpolasyon, CNC kontrol kartı, CNC Takım Tezgahı, M32C83 Mikro denetleyici, G-Kodlan
  7. Yıl: 2004
  8. Dil: Türkçe
  9. Üniversite: Kocaeli Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: Kimya Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 118

Özet

İKİ EKSENLİ DAİRESEL ENTERPOLASYON YAPABİLEN CNC KONTROL DEVRESİ TASARIMI Sermin YAZICI

Özet (Çeviri)

pTHE PROJECT OF CNC CONTROL CYCLE WHICH CAN MAKE DOUBLE-AXIS CIRCLE INTERPOLATION Sermin YAZICI Keywords : Circular interpolation, Linear Interpolation, CNC Control Card, CNC Machines, M32C83 Micro Controller, G-Codes. Abstract : Computer Numerical Control (CNC) is a system which works as a decision-maker and has its own computer system inside. CNC systems are very flexible and require cheaper investments compared to Numerically Controlled (NC) systems. Since user interface, programmer, controller and simulator are combined in a single system, it is very much preferred in industry. In this study, a control card is designed for CNC tool motion commands (GOO, G01, G02, G03). The control card is then used to control a two-axis mechanical system. Linear and circular interpolations in two dimensions are made using a 32-bit Renesas M32C83 MCU which provide floating point mathematics functions. The control card can communicate with computer through RS232. Process planning batch file which is formed of G-codes can be prepared in the computer software and then transferred to the control card. This file is saved to EEPROM of the control card. The M32C83 micro controller on the control card sends the driver signals in cycle form by reading the collected work file from EEPROM line by line. Since there are step motors in mechanical system a driver card for steppers are also designed and constructed. In linear motion two points on a plane is connected by a straight line. In circular motion however circular arc is divided into segments and each segment is then obtained in linear interpolation. m

Benzer Tezler

  1. Design and optimization of variable stiffness composite structures modeled using Bézier curves

    Bézier eğrileriyle modellenen değişken katılıklı kompozit yapıların tasarımı ve optimizasyonu

    ONUR COŞKUN

    Doktora

    İngilizce

    İngilizce

    2022

    Havacılık ve Uzay Mühendisliğiİstanbul Teknik Üniversitesi

    Uçak ve Uzay Mühendisliği Ana Bilim Dalı

    PROF. DR. HALİT SÜLEYMAN TÜRKMEN

  2. Hidrolik tahrikli sayısal denetimli bir sistemde dairesel interpolasyon hareketlerinin analizi

    Analysis of circular interpolation motions in a numerical controlled hydraulic driven system

    AHMET MURAT PİNAR

    Doktora

    Türkçe

    Türkçe

    2006

    Makine MühendisliğiGazi Üniversitesi

    Makine Eğitimi Ana Bilim Dalı

    Y.DOÇ.DR. ABDULKADİR GÜLLÜ

  3. Zaman bölgesinde sonlu farklar yöntemi ile radar kesit alanı kestirimi.

    Radar cross section prediction with finite difference time domain method

    FUNDA ERGÜN YARDIM

    Doktora

    Türkçe

    Türkçe

    2012

    Elektrik ve Elektronik MühendisliğiGazi Üniversitesi

    Elektrik-Elektronik Mühendisliği Ana Bilim Dalı

    YRD. DOÇ. DR. NURSEL AKÇAM

  4. Üç eksenli terco yüzey işleme tezgahının bilgisayar ile kontrolü

    Control of three-axis surface processing machine through PC

    AHMET SERKAN UYANIK

    Yüksek Lisans

    Türkçe

    Türkçe

    2006

    Bilgisayar Mühendisliği Bilimleri-Bilgisayar ve KontrolMarmara Üniversitesi

    Elektronik-Bilgisayar Eğitimi Ana Bilim Dalı

    Y.DOÇ.DR. MUSTAFA ONAT

  5. Eğri eksenli düzlemsel kirişlerin düzlem dışı statik problemlerinin analitik çözümü

    Başlık çevirisi yok

    O.YAŞAR DOĞRUER

    Yüksek Lisans

    Türkçe

    Türkçe

    1998

    Makine Mühendisliğiİstanbul Teknik Üniversitesi

    Makine Mühendisliği Ana Bilim Dalı

    PROF. DR. ALAATTİN ARPACI