Furfuril alkolün elektrokimyasal polimerleşmesi
Electrochemical polymerization of furfuryl alcohol
- Tez No: 196751
- Danışmanlar: Y.DOÇ.DR. HASAN NUR TESTERECİ
- Tez Türü: Yüksek Lisans
- Konular: Kimya, Chemistry
- Anahtar Kelimeler: Belirtilmemiş.
- Yıl: 2005
- Dil: Türkçe
- Üniversite: Kırıkkale Üniversitesi
- Enstitü: Fen Bilimleri Enstitüsü
- Ana Bilim Dalı: Kimya Ana Bilim Dalı
- Bilim Dalı: Belirtilmemiş.
- Sayfa Sayısı: 82
Özet
ÖZET)85)85ø/$/.2/h1(/(.752.ø0
Özet (Çeviri)
ABSTRACTELECTROCHEMICAL POLYMERIZATION OF FURFURYL ALCOHOLBÜLBÜL, Elçin.ÃUÃNNDOH8QLYHUVLW\Graduate School of Natural and Applied SciencesDepartment of Chemistry, M. Sc. ThesisSupervisor : Assoc. Prof. Dr.+DVDQ1XU7(67(5(&øJune 2005, 69 pagesIn this work, furfuryl alcohol (FA) was polymerized electrochemically indifferent solvent-electrolyt couples via constant potential electrolysis (CPE) andconstant current electrolysis (CCE). Moreover, the factors effecting thepolymerization such as solvent, potential and temperature were examined.In this study, cyclic voltametry (CV) of FA an oxidation peak was obtained at1650 mV. It was observed that a diffusion controlled electron transfer at 1650 mVfollowed by a chemical reaction according to Nicholson-Shain criteria.In CPE study, grafit (C) electrode was used as a working electrode and it wasobtained 41% conversion values as the temperature increases. The catalyst SnCl4 hada positive effect on percent conversion. The product had a little solubility in commonorganic solvent, but the soluble parts became insoluble upon standing.The effect of temperature, solvent, electrode and electrolyt was studied as afunction of percent conversion by CCE. It is found that as the current intensityincreases, the percent conversion arrives to 95%. The products were insoluble incommon organic solvents.The structural analyses of the products were performed bye FT-IR, NMRspectroscopy. The studies revealed that although the ring rupture of FA during thepolymerization, as given in literature, the main product polyfurfuryl alcohol, joinedbye methylene bridges which is the auto-condensation product. It was observed thepolymers consist of tetramers by a theoretical calculation depending upon the NMRsignals. The polymer Tg was about 125oC. No conductivity was observed in anypolymeric product.Key words : Furfuryl alcohol, FA, Electrochemical polymerization, Auto-condensation, Ring opening.ii
Benzer Tezler
- Elektroforetik infiltrasyon tekniği kullanılarak SiC partikül takviyesiyle yoğunluğu artırılan karbon malzemelerin mekanik özelliklerinin geliştirilmesi
Development of mechanical properties of carbon materials with increased density by particle reinforcement of SiC electrophoretic infiltration technique
RIFAT BAŞAR ÇELİK
Yüksek Lisans
Türkçe
2020
Metalurji MühendisliğiKocaeli ÜniversitesiMetalurji ve Malzeme Mühendisliği Ana Bilim Dalı
DOÇ. DR. ENBİYA TÜREDİ
- Sıcak hava ve kızılötesi kurutma işleminin arı poleninin bazı fiziksel özellikleri ve uçucu bileşen profili üzerine etkisi
Effect of hot air and infrared drying processes on some physical properties and volatile compound profile of bee pollen
SEVİNÇ ÇİFTÇİ
Yüksek Lisans
Türkçe
2021
Gıda MühendisliğiOrdu ÜniversitesiGıda Mühendisliği Ana Bilim Dalı
DOÇ. DR. BEKİR GÖKÇEN MAZI
- Furfuril alkol ve furfurilaminin atom transfer radikal polimerleşmeleri ve elde edilen polimerlerin bazı metal iyonlarını adsorplama özelliklerinin incelenmesi
Atom transfer radical polymerizations of furfuryl alcohol and furfurylamine and investigation of some metal ion adsorption characteristics
HALİL ÜNVER
- Bazı hetarilformazanların ve metal komplekslerin sentezleri ve boyarmadde olarak kullanılabilirliklerinin araştırılması
Synthesis and dying properties of some hetarylformazans and their metal complexes
İBRAHİM KESKİN
- Işık ile uyarılarak kendini onaran polimerik ince filmler
Light induced self-healing polymer thin films
ZEHRA ONGUN
Yüksek Lisans
Türkçe
2019
Polimer Bilim ve TeknolojisiGazi ÜniversitesiKimya Ana Bilim Dalı
PROF. DR. TUNCER ÇAYKARA