Geri Dön

Çelik-beton kompozit enkesitli kirişlerin gerilme ve şekil değiştirmelerinin araştırılması

Investigation of stresses and deformations of steel concrete composite beams

  1. Tez No: 197266
  2. Yazar: SERDAR GÜNBAY
  3. Danışmanlar: PROF. DR. CEMAL EYYUBOV
  4. Tez Türü: Yüksek Lisans
  5. Konular: İnşaat Mühendisliği, Civil Engineering
  6. Anahtar Kelimeler: Kompozit kirişler, kirişler, gerilme, sehim, şekil değiştirme, Composite beam, beams, stress, deflection, deformation
  7. Yıl: 2005
  8. Dil: Türkçe
  9. Üniversite: Erciyes Üniversitesi
  10. Enstitü: Fen Bilimleri Enstitüsü
  11. Ana Bilim Dalı: İnşaat Mühendisliği Ana Bilim Dalı
  12. Bilim Dalı: Belirtilmemiş.
  13. Sayfa Sayısı: 118

Özet

Karma bir davranış karakterine sahip kirişlerin ekonomik konstrüktif teşkillerininhazırlanması ve çelik yapı inşaatında yaygın olarak kullanılabilmesini sağlayanteknik yöntemlerin araştırılması güncel bir sorundur. Bu tez çalışmasında I ve [ enkesitli çelik kirişlerin en kesitinde oluşan basınç gerilmesinin büyük kısmınıbetonarme en kesit parçasına aktarabilen bir teknik yöntemle hazırlanan kirişkonstrüktif teşkillerinin hesaplanması ve tasarım esaslarının incelenmesi yeralmaktadır. Bu kiriş konstrüktif teşkilleri geçmiş SSCB'ye ait kaynaklarda [1] karmaen kesitli, Amerika, Avrupa ve Türkiye `ye ait bilimsel yayınlarda kompozit enkesitli kirişler olarak tarif edilmektedir.Bu tez çalışmasında kompozit en kesitli kirişlerin konstrüktif teşkillerinin analizi;kompozit kirişlerin hesaplanması metotlarının literatür verilerine bağlı olarakanalizi; kompozit kirişilerin dayanım ve şekil değiştirmesinin deneysel incelemesonuçlarının genelleştirilmesi; ve kompozit en kesitli kirişlerin hesaplanmasınınAISC, AASHTO, DIN 1078 şartnamelerinde yer alan metotları mukayeseli olarakverilmiştir. Ayrıca burada çelik döşeme, betonarme plak çelik kirişi sistemi üzerineoturan ve kompozit olarak teşkil olunan farklı döşeme kiriş teşkillerinin sayısalolarak hesaplanma sonuçları mukayeseli olarak yer almaktadır.

Özet (Çeviri)

Investigation of technical methods furnishing the construction of economicalstructural formations of beams that have composite behaviour character and theirusage in steel structures is a contemporary problem. This thesis work involves thecalculation of structural formations of beams through a technical method which isable to transfer the compressive stresses in the crossections of I and [ shaped steelbeems to the crossection of reinforced concrete component, and the examination oftheir design basis. The structural formations of these beams are defined as mixedcrossection in the early USSR resources[1] and as composite crossection in thescientific publications in Unites States, Europe and Turkey.Given in this thesis work is the analysis of structural formations of composite beams;the analysis of calculation methods of composite beams on the basis of literatureresearch; the generalization of the results of the experimental studies on strength anddeformations of composite beams; and the comparative calculation methods ofAISC, AASHTO, and DIN 1078 codes. Comparative numerical calculation results ofdifferent formations of composite beams supporting a steel deck or a reinforcedconcrete slab is also given herein.

Benzer Tezler

  1. Kompozit ve betonarme prefabrik karkasbir endüstri yapısının maliyet karşılaştırması

    Comparison between steel-concrete composite and precast reinforced concrete solutions for an industrial building

    BELGİN ÖZTOPRAK

    Yüksek Lisans

    Türkçe

    Türkçe

    1999

    İnşaat Mühendisliğiİstanbul Teknik Üniversitesi

    İnşaat Mühendisliği Ana Bilim Dalı

    PROF. DR. TEVFİK SENO ARDA

  2. Çok katlı çelik çerçeve türü bir taşıyıcı sisteminde eski ve güncel yönetmelik uygulamalarının karşılaştırılması

    Comparison of a multi storey steel structure system according to the old and the new building code applications

    FATİH IRGAÇ

    Yüksek Lisans

    Türkçe

    Türkçe

    2019

    Mühendislik Bilimleriİstanbul Teknik Üniversitesi

    İnşaat Mühendisliği Ana Bilim Dalı

    DR. ÖĞR. ÜYESİ MECİT ÇELİK

  3. Geleneksel beton ve ultra yüksek performanslı lifli beton içeren kompozit kirişlerin eğilme davranışının deneysel incelenmesi

    Experimental investigation of flexural behavior of composite reinforced concrete beams with conventional concrete and ultra high performance fiber reinforced concrete

    İSMAİL BAHA TORUN

    Yüksek Lisans

    Türkçe

    Türkçe

    2019

    İnşaat MühendisliğiBalıkesir Üniversitesi

    İnşaat Mühendisliği Ana Bilim Dalı

    DR. ÖĞR. ÜYESİ KAAN TÜRKER

  4. Eğilme etkisi altında gergi halatlı kompozit kirişlerin davranışı

    Behavior of composite beams with tension rope under the bending effect

    NURSULTAN KAPARBEK UULU

    Yüksek Lisans

    Türkçe

    Türkçe

    2018

    İnşaat MühendisliğiSüleyman Demirel Üniversitesi

    İnşaat Mühendisliği Ana Bilim Dalı

    YRD. DOÇ. DR. İLYAS DEVRAN ÇELİK

  5. Mevcut öngermeli kirişli betonarme bir köprünün AASHTO LRFD'ye göre çelik I kirişlerle kompozit tasarımı ve karşılaştırmalı analizi

    Design and comparative analysis of an existing prestressed concrete bridge with a composite steel I-girder bridge according to AASHTO LRFD specification

    GİZEM KOLGU YİĞİT

    Yüksek Lisans

    Türkçe

    Türkçe

    2019

    Mühendislik Bilimleriİstanbul Teknik Üniversitesi

    İnşaat Mühendisliği Ana Bilim Dalı

    PROF. DR. ELİŞAN FİLİZ PİROĞLU